NCIDQ EXAM QUESTIONS AND ANSWERS
100% PASS |ALREADY GRADED A+| VERIFIED
AND UPDATED
This type of lamp produces light by heating a material (usually metal) to
a temperature at which it glows.
a. neon
b. LED
c. fluorescent
d. incandescent - correct answer-d. incandescent
An interior designer is evaluating various alternatives for a particular
building product as they relate to sustainability. The interior designer
would most likely use
a. a matrix comparison chart
b. a life-cycle assessment
c. an impact assessment
d. an environmental impact study - correct answer-b. a life-cycle
assessment
,The Greenguard Environmental Institute follows ASTM Standards D5116
and D6670 primarily for what purpose?
a. to establish radon remediation and mitigation standards for trained
contractors.
b. to identify the required emissions levels of products before
certification by the organization.
c. to establish the allowable levels of polychlorinated biphenyls (PCBs)
in building products. - correct answer-b. to identify the required
emissions levels of products before certification by the organization.
All of the following are true about a building informational model
except?
a. model can be used to create an estimate of materials, door schedules
or cost estimates
b. is a two dimensional drawing created using computer software
c. allows all members of the project team to share the model through
computer networking
d. allows information about building components like doors and
windows to be attached and included in the model - correct answer-b.
is a two dimensional drawing created using computer software
BIM is 3 dimensional
,The full extent of slab-to-slab partitions on a project is best shown on
a. the reflected ceiling plan
b. wall section
c. the interior elevations
d. details - correct answer-a. the reflected ceiling plan
The reflected ceiling plan should show slab-to-slab partitions as well as
ceiling-high partitions. Although this information is usually indicated on
wall-section details and sometimes on interior elevations, the reflected
ceiling plan is the one place where it is all shown at once in an obvious
manner.
What is the minimum clear floor space required for a wheelchair?
a. 36"x48" (900 mm x 1200 mm)
b. 30"x40" (750 mm x 1000 mm)
c. 36"x40" (900 mm x 1000 mm)
d. 30"x48" (750 mm x 1200 mm) - correct answer-d. 30"x48" (750 mm x
1200 mm)
, The lobby of a building from the stair enclosure to the exterior door is
called:
a. exit discharge
b. exit access
c. exit refuge
d. exit passageway - correct answer-a. exit discharge
Exit discharge is the part of egress between the exit and public way.
What is minimum clear width of the doorway of an egress door? -
correct answer-32" CLEAR width
How high should an accessible toilet be mounted? - correct answer-17"-
19"
With regards to wayfinding, what are Lynch's five mapping elements?
a. Transitions, Nodes, Paths, Edges, Landmarks
b. Paths, Signs, Landmarks, Towns, Transitions
c. Districts, Aisles, Nodes, Monuments, Edges
100% PASS |ALREADY GRADED A+| VERIFIED
AND UPDATED
This type of lamp produces light by heating a material (usually metal) to
a temperature at which it glows.
a. neon
b. LED
c. fluorescent
d. incandescent - correct answer-d. incandescent
An interior designer is evaluating various alternatives for a particular
building product as they relate to sustainability. The interior designer
would most likely use
a. a matrix comparison chart
b. a life-cycle assessment
c. an impact assessment
d. an environmental impact study - correct answer-b. a life-cycle
assessment
,The Greenguard Environmental Institute follows ASTM Standards D5116
and D6670 primarily for what purpose?
a. to establish radon remediation and mitigation standards for trained
contractors.
b. to identify the required emissions levels of products before
certification by the organization.
c. to establish the allowable levels of polychlorinated biphenyls (PCBs)
in building products. - correct answer-b. to identify the required
emissions levels of products before certification by the organization.
All of the following are true about a building informational model
except?
a. model can be used to create an estimate of materials, door schedules
or cost estimates
b. is a two dimensional drawing created using computer software
c. allows all members of the project team to share the model through
computer networking
d. allows information about building components like doors and
windows to be attached and included in the model - correct answer-b.
is a two dimensional drawing created using computer software
BIM is 3 dimensional
,The full extent of slab-to-slab partitions on a project is best shown on
a. the reflected ceiling plan
b. wall section
c. the interior elevations
d. details - correct answer-a. the reflected ceiling plan
The reflected ceiling plan should show slab-to-slab partitions as well as
ceiling-high partitions. Although this information is usually indicated on
wall-section details and sometimes on interior elevations, the reflected
ceiling plan is the one place where it is all shown at once in an obvious
manner.
What is the minimum clear floor space required for a wheelchair?
a. 36"x48" (900 mm x 1200 mm)
b. 30"x40" (750 mm x 1000 mm)
c. 36"x40" (900 mm x 1000 mm)
d. 30"x48" (750 mm x 1200 mm) - correct answer-d. 30"x48" (750 mm x
1200 mm)
, The lobby of a building from the stair enclosure to the exterior door is
called:
a. exit discharge
b. exit access
c. exit refuge
d. exit passageway - correct answer-a. exit discharge
Exit discharge is the part of egress between the exit and public way.
What is minimum clear width of the doorway of an egress door? -
correct answer-32" CLEAR width
How high should an accessible toilet be mounted? - correct answer-17"-
19"
With regards to wayfinding, what are Lynch's five mapping elements?
a. Transitions, Nodes, Paths, Edges, Landmarks
b. Paths, Signs, Landmarks, Towns, Transitions
c. Districts, Aisles, Nodes, Monuments, Edges
