12/19/25, 2:30 PM NCCCO Tower Crane Study EXAM fully solved & updated 2025-2026(latest version verified for accuracy) (Questions + Answers) …
NCCCO Tower Crane Study EXAM fully solved &
updated 2025-2026(latest version verified for
accuracy) (Questions + Answers) Solved 100%
Correct!!
Save
Terms in this set (52)
T or F: Self-erecting tower cranes are False
easier to erect than a conventional
tower cranes but erection time takes
longer.
According to OSHA 1926.1435 before Qualified Person
each crane component is erected, it
must be inspected by whom?
T or False: Because of the typically False
high operating heights, tower crane
operation is not affected by, and is
therefore exempt from power line
clearance regulations.
T or F: Guylines are never used to False
secure a freestanding tower while it
is being assembled.
https://quizlet.com/1124786184/nccco-tower-crane-study-exam-fully-solved-updated-2025-2026latest-version-verified-for-accuracy-questions-answers-… 1/7
, 12/19/25, 2:30 PM NCCCO Tower Crane Study EXAM fully solved & updated 2025-2026(latest version verified for accuracy) (Questions + Answers) …
T or F: When assembling the crane, False
spring clips are used to secure the
pendant pins because of their ease
and safety.
After erection, what must be done Load test the crane
before putting a tower cranes in
service?
T off: Tower and mobile cranes are False
both load tested at 110% overload
When tower base bolts are torqued, Counterweight over the bolts
the jib is rotated so the
counterweight is positioned in what
position relating to the bolts being
tightened?
A tower crane fastened to the Every four floors
outside of a building should be
secured a minimum of
Foundations and structural supports Engineer
must be designed by whom?
According to OSHA, list 2 people Operator and A/D Director
who must be present while erecting
a tower crane?
What is used to adjust the jib for Turnbuckles
proper inclination and eliminate jib
twist?
https://quizlet.com/1124786184/nccco-tower-crane-study-exam-fully-solved-updated-2025-2026latest-version-verified-for-accuracy-questions-answers-… 2/7
NCCCO Tower Crane Study EXAM fully solved &
updated 2025-2026(latest version verified for
accuracy) (Questions + Answers) Solved 100%
Correct!!
Save
Terms in this set (52)
T or F: Self-erecting tower cranes are False
easier to erect than a conventional
tower cranes but erection time takes
longer.
According to OSHA 1926.1435 before Qualified Person
each crane component is erected, it
must be inspected by whom?
T or False: Because of the typically False
high operating heights, tower crane
operation is not affected by, and is
therefore exempt from power line
clearance regulations.
T or F: Guylines are never used to False
secure a freestanding tower while it
is being assembled.
https://quizlet.com/1124786184/nccco-tower-crane-study-exam-fully-solved-updated-2025-2026latest-version-verified-for-accuracy-questions-answers-… 1/7
, 12/19/25, 2:30 PM NCCCO Tower Crane Study EXAM fully solved & updated 2025-2026(latest version verified for accuracy) (Questions + Answers) …
T or F: When assembling the crane, False
spring clips are used to secure the
pendant pins because of their ease
and safety.
After erection, what must be done Load test the crane
before putting a tower cranes in
service?
T off: Tower and mobile cranes are False
both load tested at 110% overload
When tower base bolts are torqued, Counterweight over the bolts
the jib is rotated so the
counterweight is positioned in what
position relating to the bolts being
tightened?
A tower crane fastened to the Every four floors
outside of a building should be
secured a minimum of
Foundations and structural supports Engineer
must be designed by whom?
According to OSHA, list 2 people Operator and A/D Director
who must be present while erecting
a tower crane?
What is used to adjust the jib for Turnbuckles
proper inclination and eliminate jib
twist?
https://quizlet.com/1124786184/nccco-tower-crane-study-exam-fully-solved-updated-2025-2026latest-version-verified-for-accuracy-questions-answers-… 2/7
