Final Exam - TF and MC EGT 120 Questions With
Complete Solutions
__ are the drafting standards used in EGT 120 Correct Answers
ANSI/ASME Y14
A __ section is created by passing an imaginary cutting plane
halfway through an object Correct Answers full (wrong)
A broken-out (local) section is used when half of an object
needs to be sectioned Correct Answers False
A line and an arc in a tangent condition will touch at only one
point if both are extended Correct Answers True
A part or subassembly cannot be brought in to an assembly more
than once Correct Answers False
A secondary auxiliary view is one that is projected from an
already existing auxiliary view Correct Answers True
A(n) __ angle is formed by two perpendicular lines Correct
Answers right
A(n) __ is foreshortened in two of the principle views and an
edge view in another Correct Answers inclined surface
Almost all work in a parametric modeler like Creo can be edited
or redefined Correct Answers True
, Auxiliary views show inclined features in their true shape and
size Correct Answers True
Auxiliary views use parallel projection techniques Correct
Answers True
Because construction lines are not actual geometry, they never
need dimensions Correct Answers False
Completely round features, such as cylinders, often are
dimensioned with a radius Correct Answers False
Constraints in a parametric modeler may be geometric or
defined by equations Correct Answers True
Creating an assembly usually begins with bringing in a __
Correct Answers base component
Creating solid extruded features requires a "closed loop" profile
and a datum axis Correct Answers False
Dimensions generally show two things; __ Correct Answers
size and location
Drawings (.drw files) extracted from 3D models should update if
the model (.prt file) is changed Correct Answers True
E, D, I, G, H, F, J, A, C, B Correct Answers .
E, H, F, A, K, I, B, J, G, D Correct Answers .
Complete Solutions
__ are the drafting standards used in EGT 120 Correct Answers
ANSI/ASME Y14
A __ section is created by passing an imaginary cutting plane
halfway through an object Correct Answers full (wrong)
A broken-out (local) section is used when half of an object
needs to be sectioned Correct Answers False
A line and an arc in a tangent condition will touch at only one
point if both are extended Correct Answers True
A part or subassembly cannot be brought in to an assembly more
than once Correct Answers False
A secondary auxiliary view is one that is projected from an
already existing auxiliary view Correct Answers True
A(n) __ angle is formed by two perpendicular lines Correct
Answers right
A(n) __ is foreshortened in two of the principle views and an
edge view in another Correct Answers inclined surface
Almost all work in a parametric modeler like Creo can be edited
or redefined Correct Answers True
, Auxiliary views show inclined features in their true shape and
size Correct Answers True
Auxiliary views use parallel projection techniques Correct
Answers True
Because construction lines are not actual geometry, they never
need dimensions Correct Answers False
Completely round features, such as cylinders, often are
dimensioned with a radius Correct Answers False
Constraints in a parametric modeler may be geometric or
defined by equations Correct Answers True
Creating an assembly usually begins with bringing in a __
Correct Answers base component
Creating solid extruded features requires a "closed loop" profile
and a datum axis Correct Answers False
Dimensions generally show two things; __ Correct Answers
size and location
Drawings (.drw files) extracted from 3D models should update if
the model (.prt file) is changed Correct Answers True
E, D, I, G, H, F, J, A, C, B Correct Answers .
E, H, F, A, K, I, B, J, G, D Correct Answers .
