Study online at https://quizlet.com/_gw3bol
1. Railcars tranporting HD/D 1.4s materials require a placard when the load
weight exceeds?: 1,000 Lbs
2. What is the civil penalty for a person who knowingly violates an inspection
requirement of federal hazardous materials transportation NOT end in sever
injury,death or substantial destruction of property?: $96,624
3. Which item is acceptable for sealing the door of boxcars transporting HC 1
materials?: Serial-numberer bolt seal
4. Can comparability groups C and D travel in the same container?: (lands on 2, under
restrictions) -Yes C,D,W is compatible in any combination but assigned to group E
5. Before starting a railcar inspection, you must set the breaks, place blue
�ags...?: Insert chocks on both sides of the SAME SET OF WHEELS.
6. Can comparability groups F and F travel in the samw container? NAVSEA
SW020-AC-SAF-010: Yes they are compatible with no restrictions.
7. During an outgoing railcar inspection, the inspector must verify the railcar is
free from dunnage or debris, security seals and..?: door seals, seal notices, and seal tags
8. How does the shipping inspector verify that a load has been blocked and
braced properly when the load blocks the view of the blocking and bracing
for the entire shipment?: If the visible, blocking looks acceptable the inspector can assume the rest of the
shipment is loaded correctly (if it looks like the diagram/loaded like it)
9. Can comparability groups H and S travel in the same container?: Yes - Only if Note
4 and Note 5 restrictions are adhered to
10. Which publication provides detailed A&E (Ammo and Explosives) transporta-
tion and storage data on NALC datasheets for most common A&E items?: NAVSEA
SW020-AC-SAF-010
11. Which placard is required for a railcar load of HC/D 1.4s that does not require
any labeling?: No placard required
12. NAVSEA 8023/3, Items 1-23 must be inspected for incoming railcars carry-
ing..?: Guessing all non A&E Hazardous materials OR 1.1,1.2,1.3
13. Railcars transporting HC/D 1.4s materials require placards when the load
exceeds.?: 1,000 LBS
14. which form is used to document a broken seal and missing A&E material
during an incoming railcar inspection.?: DD FORM 361
1/2
, AMMO 51 RC-DL 2024 EXAM
Study online at https://quizlet.com/_gw3bol
15. Whic HC/D(s) require placards to be displayed on a white background a xed
to the �atcar deck?: HC/D 1.1 ONLY
16. Can groups L and L travel in the same container: (Yes lands on 1, restrictions apply) - Only
with IDENTICAL EXPLOSIVES!!
17. Which action is required when encountering a railcar with a bad order
card?: Return the railcar back to the carrier
18. Which publication provides general blocking and bracing guidelines for a
load that does not have a speci c load drawing?: MIL-STD-1320E
19. What is the minimum thickness for a 36 inch wheel rim?: 7/8 inch thick
20. What is the maximum criminal penalty for a person who willfully or recklessly
violates a requirement of federal hazard material....: Maximum 10 years imprisonment if
violation results in death or injury
21. Can groups E and G travel in the same container?: Only if no explosive substances are
carried in the same vehicle
22. By checking accept and signing the pre load inspectors block on NAVSEA
form 8023/3 the inspector certi es the rail car passed and is ready for...?: Load
with cargo
23. An incoming ISO container loaded with HC/D 1.1 sealed with a serial num-
bered bolt seal. Which action should the inspector take?: Verify the serial number and it
matches the shipping documents
24. Which form is used to document a load with unreadable markings on some
containers during an incoming vehicle inspection?: SF 364
25. Which form does the carrier sign to certify an empty incoming railcar is safe
to load and transport HC/D 1.1 and 1.2 items?: Car certi�cate
2/2
, AMMO 51 MV
Study online at https://quizlet.com/_8s7xij
1. Which regulation establishes the Department of Defense (DOD) policies and
procedures for the transportation and movement of material?: DTR 4500.9-R
2. Which volume of the NAVSEA OP5 applies to the transportation of hazardous
materials ashore?: Volume 1
3. Which Department of Transportation Special Permit applies when shipping
NSN 1410-01-235-7044 NALC PC84 material by motor vehicle?: DOT SP-868
4. What is the minimum number of motor vehicles required to ship NALC items
G878, D528, E487, H110 and PA08. The weight of each item is 1,500 lbs.:
5. Which placards would be required if 4 trucks were shipping the following
material?: 1.1,1.2,1.3,1.4
6. A semi-tractor trailer is pulling a trailer transporting Hazard Class/Division 1.3.
The tractor will carry no explosives. Which statement is the most correct?: The
explosives 1.3 placard may be placed on either the front of the tractor or the front of the trailer.
7. Must a copy of a Competent Authority Approval (CAA) accompany a shipment
of PE79 that will be shipped to a location in Japan?: YES
8. What is assigned to every type of ammunition so that it can be properly
accounted for and protected from falling into the wrong hands? Select all that
apply.: CIIC
9. Which ammunition item would be assigned a lower security level?: bomb
10. Ordnance carried on military-owned tactical vehicles operating on public
roads must be blocked and braced in accordance with a MIL-STD, WR or other
approved procedure.: MIL-STD-1320D
11. What is a size of steel strapping that may be used to secure ammunition to
�atbed trailers?: 2 in x 0.050 in
12. Which factor governs the total load weight that may be placed on a truck
shipment of NSN, 1305-00-147-5904 NALC A475?: Cube, permissible gross weight and axle
load limitation
13. Which section of the DD Form 626 would provide speci c requirements for
inspecting a vehicle's steering system?:
14. What part of the DD Form 626 documents the required driver information?-
: Section 1
1/3