UTA MAE 1351 UPDATED EXAM 1
2026/2027 COMPLETE MULTIPLE
CHOICE QUESTION BANK WITH
VERIFIED ANSWERS ,DETAILED
EXPLANATIONS AND 100%
GUARANTEE PASS (ORIGINAL
COPY!!!!!)
High or low volume production?
Sand Casting - THE CORRECT ANSWER-High-Volume
- mold is created by making a master pattern. which has the
same geometry as the desired part.
Split lines - THE CORRECT ANSWER-places where mold can be
disassembled
High or low volume production?
Investment Casting - THE CORRECT ANSWER-High-Volume
- a form of sand casting that can be used to create relatively
intricate shapes with good accuracy.
High or low volume production?
Extrusion - THE CORRECT ANSWER-High-Volume
,- a method for creating long lengths of material with a uniform
cross section shape.
High or low volume production?
Wire drawing - THE CORRECT ANSWER-High-Volume
- wires and round bars can be reduced in diameter by pulling
slightly larger stock diameters through one or more nozzles
with gradually reducing orifices.
High or low volume production?
Rolling - THE CORRECT ANSWER-High-volume
- malleable raw material is reduced in thickness by squeezing it
through large rollers to produce plates and rectangular plates.
High or low volume production?
Deep drawing - THE CORRECT ANSWER-High-Volume
- thin shelled parts are created from sheets of thin, malleable
metal, also known as sheet metal.
High or low volume production?
Die casting - THE CORRECT ANSWER-High-Volume
- the mold is made of steel with surfaces that have been
hardened to improve it's durability and wear resistance.
High or low volume production?
Injection Molding - THE CORRECT ANSWER-High-Volume
, - the part material is plastic instead of metal and the molten
material is injected into the mold under pressure, it is to cut
shapes using the low-volume production processes described
earlier.
High or low volume production?
Forging - THE CORRECT ANSWER-High-Volume
- deforms a workpiece by pressing it with a great deal of force
between two pre-shaped molds or forging dies.
High or low volume production?
Stamping - THE CORRECT ANSWER-High-Volume
- an operation that is used on sheet metals, it deforms the metal
between a cavity and a closely fitting plunger.
High or low volume production?
Sintering - THE CORRECT ANSWER-High-Volume
- metal powder is placed in a mold, and a great deal of pressure
and high temperatures are applied, fusing the metal particles
together to form a solid part.
High or low volume production?
Sawing - THE CORRECT ANSWER-Low-Volume
- a multitoothed cutting blade is pulled through the material
High or low volume production?
Turning - THE CORRECT ANSWER-Low-Volume
2026/2027 COMPLETE MULTIPLE
CHOICE QUESTION BANK WITH
VERIFIED ANSWERS ,DETAILED
EXPLANATIONS AND 100%
GUARANTEE PASS (ORIGINAL
COPY!!!!!)
High or low volume production?
Sand Casting - THE CORRECT ANSWER-High-Volume
- mold is created by making a master pattern. which has the
same geometry as the desired part.
Split lines - THE CORRECT ANSWER-places where mold can be
disassembled
High or low volume production?
Investment Casting - THE CORRECT ANSWER-High-Volume
- a form of sand casting that can be used to create relatively
intricate shapes with good accuracy.
High or low volume production?
Extrusion - THE CORRECT ANSWER-High-Volume
,- a method for creating long lengths of material with a uniform
cross section shape.
High or low volume production?
Wire drawing - THE CORRECT ANSWER-High-Volume
- wires and round bars can be reduced in diameter by pulling
slightly larger stock diameters through one or more nozzles
with gradually reducing orifices.
High or low volume production?
Rolling - THE CORRECT ANSWER-High-volume
- malleable raw material is reduced in thickness by squeezing it
through large rollers to produce plates and rectangular plates.
High or low volume production?
Deep drawing - THE CORRECT ANSWER-High-Volume
- thin shelled parts are created from sheets of thin, malleable
metal, also known as sheet metal.
High or low volume production?
Die casting - THE CORRECT ANSWER-High-Volume
- the mold is made of steel with surfaces that have been
hardened to improve it's durability and wear resistance.
High or low volume production?
Injection Molding - THE CORRECT ANSWER-High-Volume
, - the part material is plastic instead of metal and the molten
material is injected into the mold under pressure, it is to cut
shapes using the low-volume production processes described
earlier.
High or low volume production?
Forging - THE CORRECT ANSWER-High-Volume
- deforms a workpiece by pressing it with a great deal of force
between two pre-shaped molds or forging dies.
High or low volume production?
Stamping - THE CORRECT ANSWER-High-Volume
- an operation that is used on sheet metals, it deforms the metal
between a cavity and a closely fitting plunger.
High or low volume production?
Sintering - THE CORRECT ANSWER-High-Volume
- metal powder is placed in a mold, and a great deal of pressure
and high temperatures are applied, fusing the metal particles
together to form a solid part.
High or low volume production?
Sawing - THE CORRECT ANSWER-Low-Volume
- a multitoothed cutting blade is pulled through the material
High or low volume production?
Turning - THE CORRECT ANSWER-Low-Volume
