COMPLETE QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED
A+||BRAND NEW!!2025-2026
Code Before
Underground inspections shall 107.2 #1 Required inspections and testing
be made
after trenches or ditches are
excavated and bedded,
piping installed, and
___________________ backfi
ll is
put into place.
Code Prior
Rough-In inspection shall 107.2 #2 Required inspections and testing
be made after the roof,
framing, fireblocking and
bracing are in place and all
ducting and other
components to be
concealed are
complete, and to the
installation of
wall or ceiling membranes.
Code Completion
Final inspection shall be made 107.2 #3 Required inspections and testing
upon ___________________ of
the mechanical system.
Code Separate
Each day a code violation 108.4 Violation penalties
continues after due notice
,has been served shall be
deemed a offense.
Code Disconnection
The code official shall have 108.7.2 Authority to order disconnection of energy sources.
the authority to order of
energy sources supplied to
a
building, structure or
mechanical system
regulated by this code,
when it is
determined that the
mechanical system or any
portion thereof has become
hazardous or unsafe.
Definition Clearance
The minimum distance through 202 General Definitions
air
measured between the
heat-producing surface of
the mechanical appliance,
device or equipment and the
surface of the combustible
material or assembly.
Definition Air Conditioning
The treatment of air so as to 202 General Definitions
control
simultaneously the
temperature, humidity,
cleanness and distribution
of the air to
meet the requirements of a
conditioned space.
,Definition Air-conditioning
A system that consists of heat System 202
exchangers, blowers, filters,
supply, exhaust and return General
ducts, and shall include any
apparatus installed in Definitions
connection therewith.
Definition Return Air
Air removed from an approved 202 General Definitions
conditioned space or
location and recirculated or
exhausted.
Definition British Thermal Unit
BTU is the abbreviation for , 202 General Definitions
which is the quantity of
heat required to raise the
temperature of 1 pound of
water 1°F.
Definition High-heat appliance
Any appliance in which 202 General Definitions, Appliance Type
the products of combustion
at the point of entrance to
the flue under normal
operating conditions
have a temperature greater
than 2000°F
Definition Low-heat
appliance
Any appliance in which (Residential
the products of combustion appliance)
at the point of entrance to
the flue under normal 202 General Definitions
operating conditions
have a temperature of 1000°F
or less.
, Definition Medium-heat
Any appliance in which appliance 202
the products of combustion
at the point of entrance to General
the flue under normal
operating conditions Definitions
have a temperature of more
than 1000°F, but not
greater than 2000°F.
Definition Boiler
A closed heating appliance 202 General Definitions
intended to supply hot
water or steam for space
heating, processing or power
purposes.
Definition Chimney
A primarily vertical 202 General Definitions
structure containing one
or more flues, for the
purpose of
carrying gaseous products
of combustion and air from
a fuel-burning appliance to
the outdoor atmosphere.
Definition Clothes Dryer
An appliance used to dry wet 202 General Definitions
laundry by means of heat.