CR101B Introduction to Collision
Repair Exam Questions and
Answers 100% Pass
Which of these warnings is shown in the symbol below? - CORRECT ANSWER-
Flammable
The reason a safety cable is used on a pulling chain is to: - CORRECT ANSWER-
help reduce backlash if the chain comes loose.
Why are a type of lineman's gloves recommended when working with high voltage
parts? - CORRECT ANSWER-They are electrically insulated.
Which of these safety items is recommended when doing the process shown in the
photo below? (Using a hammer & dolly) - CORRECT ANSWER-Safety glasses
Which of these warnings is shown in the symbol below? - CORRECT ANSWER-
Poison
Which of these is a safety issue when doing the process shown in the photo below?
(Spot welding) - CORRECT ANSWER-Sparking from the welding process
,Which of these safety items is missing on the technician in the photo below?
(Using angle grinder) - CORRECT ANSWER-Full-face shield
Which of these safety items is missing on the technician in the photo below?
(Wiping a car down with something) - CORRECT ANSWER-Protective gloves
Which of these sheathing colors is commonly used to designate high voltage
wiring? - CORRECT ANSWER-Bright orange
Which of these safety equipment items avoids flash burn when observing the task
shown in the photo below? (welding) - CORRECT ANSWER-Welding helmet
Technician A says that employers are allowed to remove information from an SDS
for use in the work place. Technician B says that employers should retain an SDS
for 30 years after the product is no longer used. Who is right? - CORRECT
ANSWER-B only
A carcinogen is a substance that causes: - CORRECT ANSWER-cancer
Olfactory fatigue is when a person: - CORRECT ANSWER-can no longer smell a
chemical after exposure.
A Class B fire extinguisher could be used on a: - CORRECT ANSWER-burning
solvent.
Which of these can occur while welding on a panel that has a catalyzed clearcoat
finish? - CORRECT ANSWER-Release of isocyanate vapors
Hepatitis B is considered: - CORRECT ANSWER-a blood borne pathogen.
COPYRIGHT ALL RIGHTS RESERVED ©️ 2025
, Information on cleaning a hazardous material spill can be found in what section of
an SDS? - CORRECT ANSWER-Accidental Release Measures
If a container does not have a label, a technician should: - CORRECT ANSWER-
avoid handling material until identified.
Which of these should be worn when using a half- mask supplied-air respirator
during refinishing? - CORRECT ANSWER-Goggles
A flammable material: - CORRECT ANSWER-can easily catch fire and burn
rapidly or explosively.
The process being shown in the photo above is: (body filler) - CORRECT
ANSWER-applying body filler.
A supplement is a: - CORRECT ANSWER-change to the damage report.
Which of these damage conditions is illustrated above? (Bend in frame rail) -
CORRECT ANSWER-Mash
The imaginary plane shown in red in the illustration above is used to measure:
(through center of vehicle - front to rear) - CORRECT ANSWER-width
The welded joint shown in the illustration above is: (two pieces joined together
w/backing) - CORRECT ANSWER-a butt joint with backing.
The technician in the photo above is marking: (yellow marker line on rail) -
CORRECT ANSWER-the cut location on the damaged rail.
Repair Exam Questions and
Answers 100% Pass
Which of these warnings is shown in the symbol below? - CORRECT ANSWER-
Flammable
The reason a safety cable is used on a pulling chain is to: - CORRECT ANSWER-
help reduce backlash if the chain comes loose.
Why are a type of lineman's gloves recommended when working with high voltage
parts? - CORRECT ANSWER-They are electrically insulated.
Which of these safety items is recommended when doing the process shown in the
photo below? (Using a hammer & dolly) - CORRECT ANSWER-Safety glasses
Which of these warnings is shown in the symbol below? - CORRECT ANSWER-
Poison
Which of these is a safety issue when doing the process shown in the photo below?
(Spot welding) - CORRECT ANSWER-Sparking from the welding process
,Which of these safety items is missing on the technician in the photo below?
(Using angle grinder) - CORRECT ANSWER-Full-face shield
Which of these safety items is missing on the technician in the photo below?
(Wiping a car down with something) - CORRECT ANSWER-Protective gloves
Which of these sheathing colors is commonly used to designate high voltage
wiring? - CORRECT ANSWER-Bright orange
Which of these safety equipment items avoids flash burn when observing the task
shown in the photo below? (welding) - CORRECT ANSWER-Welding helmet
Technician A says that employers are allowed to remove information from an SDS
for use in the work place. Technician B says that employers should retain an SDS
for 30 years after the product is no longer used. Who is right? - CORRECT
ANSWER-B only
A carcinogen is a substance that causes: - CORRECT ANSWER-cancer
Olfactory fatigue is when a person: - CORRECT ANSWER-can no longer smell a
chemical after exposure.
A Class B fire extinguisher could be used on a: - CORRECT ANSWER-burning
solvent.
Which of these can occur while welding on a panel that has a catalyzed clearcoat
finish? - CORRECT ANSWER-Release of isocyanate vapors
Hepatitis B is considered: - CORRECT ANSWER-a blood borne pathogen.
COPYRIGHT ALL RIGHTS RESERVED ©️ 2025
, Information on cleaning a hazardous material spill can be found in what section of
an SDS? - CORRECT ANSWER-Accidental Release Measures
If a container does not have a label, a technician should: - CORRECT ANSWER-
avoid handling material until identified.
Which of these should be worn when using a half- mask supplied-air respirator
during refinishing? - CORRECT ANSWER-Goggles
A flammable material: - CORRECT ANSWER-can easily catch fire and burn
rapidly or explosively.
The process being shown in the photo above is: (body filler) - CORRECT
ANSWER-applying body filler.
A supplement is a: - CORRECT ANSWER-change to the damage report.
Which of these damage conditions is illustrated above? (Bend in frame rail) -
CORRECT ANSWER-Mash
The imaginary plane shown in red in the illustration above is used to measure:
(through center of vehicle - front to rear) - CORRECT ANSWER-width
The welded joint shown in the illustration above is: (two pieces joined together
w/backing) - CORRECT ANSWER-a butt joint with backing.
The technician in the photo above is marking: (yellow marker line on rail) -
CORRECT ANSWER-the cut location on the damaged rail.
