Page |1
Minnesota Special Engineer Boiler License
Practice Exam Questions Questions and
Correct Answers/ Latest Update / Already
Graded
A Special Engineer is expected to be competent, take charge of, and
be responsible for the safe operation and maintenance of all classes of
boilers of not more than ___________ HP and their appurtenances.
Ans: 50
A gauge glass can be attached to a ____________ column, which is
attached to a boiler.
Ans: water
In accordance with the statutes of the State of Minnesota, one boiler
horsepower for conventional boilers is equal to ____________
Ans: 10 sq ft of boiler heating surface
In accordance with the statutes of the State of Minnesota, one boiler
horsepower for steam-coil-type generators is equal to ____________
Ans: 5 sq ft of boiler heating surface
All rights reserved © 2025/ 2026 |
, Page |2
When the boiler heating surface cannot be discerned, the boiler
horsepower shall be determined by dividing the Btu input by
____________
Ans: 67,000
In accordance with the statues of the State of Minnesota, each electric
boiler horsepower is equal to ____________ kilowatts
Ans: 10
A logbook must be maintained in the boiler room by the ____________
Ans: the chief engineer or the operating engineer designee
The shift engineer of a high pressure boiler plant of over 200 HP must
stay within ____________ of boiler room at all times during the shift?
Ans: 500 ft
A high pressure boiler must have two means of feedwater supply if it
exceeds ____________ HP.
Ans: 50
All rights reserved © 2025/ 2026 |
Minnesota Special Engineer Boiler License
Practice Exam Questions Questions and
Correct Answers/ Latest Update / Already
Graded
A Special Engineer is expected to be competent, take charge of, and
be responsible for the safe operation and maintenance of all classes of
boilers of not more than ___________ HP and their appurtenances.
Ans: 50
A gauge glass can be attached to a ____________ column, which is
attached to a boiler.
Ans: water
In accordance with the statutes of the State of Minnesota, one boiler
horsepower for conventional boilers is equal to ____________
Ans: 10 sq ft of boiler heating surface
In accordance with the statutes of the State of Minnesota, one boiler
horsepower for steam-coil-type generators is equal to ____________
Ans: 5 sq ft of boiler heating surface
All rights reserved © 2025/ 2026 |
, Page |2
When the boiler heating surface cannot be discerned, the boiler
horsepower shall be determined by dividing the Btu input by
____________
Ans: 67,000
In accordance with the statues of the State of Minnesota, each electric
boiler horsepower is equal to ____________ kilowatts
Ans: 10
A logbook must be maintained in the boiler room by the ____________
Ans: the chief engineer or the operating engineer designee
The shift engineer of a high pressure boiler plant of over 200 HP must
stay within ____________ of boiler room at all times during the shift?
Ans: 500 ft
A high pressure boiler must have two means of feedwater supply if it
exceeds ____________ HP.
Ans: 50
All rights reserved © 2025/ 2026 |
