• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 1 out of 4 pages
Exam (elaborations)

Engine Exam Questions With Complete Solutions A+ Pass

Document preview thumbnail
Preview 1 out of 4 pages

Engine Exam Questions With Complete Solutions A+ Pass In flight the FADEC disregards the OFF position of the ignition switch. (true/false) - Answer- True Placing the thrust levers in _____ position selects takeoff, maximum continuous, or go-around mode settings. - Answer- TO/GA What methods are available for engine starting? - Answer- APU, ground source, opposite engine and windmill start Select all answers that will trigger an ATTCS event? - Answer- N1 difference 15% between engines, engine failure during takeoff or go-around and wind shear detection Where can the crew check engine oil quantity? - Answer- MFD STATUS page What happens if a thrust reverser inadvertently deploys? - Answer- FADEC limits respective engine thrust to IDLE If two consecutive overspeed detection events occur within 30 seconds the FADEC will not relight the engine. (true/false) - Answer- False If you turn the START/STOP selector to STOP in flight will the engine shutdown? - Answer- Yes when the thrust lever is at idle What position must the thrust lever be in to enable thrust reverser trigger? - Answer- Idle What happens when the ignition switch is selected to OVRD? - Answer- Activates both igniters on the ground or in flight What controls the engine? - Answer- FADEC Full Authority Digital Electronic Control What controls engine starting and provides hung start, hot start and no light-off protection? - Answer- FADEC Does the FADEC provide engine start protection? - Answer- Only on the ground for a hot start, hung start or no light-off Is there a protection for hot starts or hung starts during an in flight start? - Answer- No How are the engine thrust ratings controlled? - Answer- By the FADEC What does the cyan line on the N1 gauge represent during approach? - Answer- The minimum N1 bleed requirements in icing conditions When does the cyan line on the N1 gauge in icing conditions during approach appear? - Answer- When configured for landing in icing conditions below 1200 feet RA How is the N1 limit indicated on the EICAS? - Answer- It's the red tick mark on the N1 gauge Where is external air for an air start connected? - Answer- Lower section of the wing fairing area Will the crew have any indication when external air for an air start is connected? - Answer- Duct pressure is shown on the MFD STATUS page What happens after 3 overspeed detection events within 30 seconds? - Answer- FADEC will not re-light the engine What does WML mean on the engine indication? - Answer- The FADEC has detected a flame-out and the auto re-light system is actuating to restart the engine What is ATTCS? - Answer- Automatic Takeoff Thrust Control System What does ATTCS provide? - Answer- Provides maximum thrust reserve (RSV) according to the current rate previously selected via the MCDU on the TO DATASET page What is the ATTCS controlled by? - Answer- FADEC When is the ATTCS available? - Answer- Takeoff and Go-Around How can the pilot command RSV power? - Answer- By moving the thrust levers to the MAX position whenever the ATTCS is armed When is thrust reverse available? - Answer- Weight-on-Wheels (ground use only) Thrust levers must be stowed below what airspeed? - Answer- 60 KIAS What does a Green REV indication on the EICAS mean? - Answer- Thrust reverser is fully deployed What does an amber REV indication on the EICAS mean? - Answer- In transition What does a red REV indication on the EICAS mean? - Answer- Discrepancy between the selected and actual reverser position

Content preview

Engine Exam Questions With
Complete Solutions A+ Pass
In flight the FADEC disregards the OFF position of the ignition switch. (true/false) -
Answer- True

Placing the thrust levers in _____ position selects takeoff, maximum continuous, or go-
around mode settings. - Answer- TO/GA

What methods are available for engine starting? - Answer- APU, ground source,
opposite engine and windmill start

Select all answers that will trigger an ATTCS event? - Answer- N1 difference > 15%
between engines, engine failure during takeoff or go-around and wind shear detection

Where can the crew check engine oil quantity? - Answer- MFD STATUS page

What happens if a thrust reverser inadvertently deploys? - Answer- FADEC limits
respective engine thrust to IDLE

If two consecutive overspeed detection events occur within 30 seconds the FADEC will
not relight the engine. (true/false) - Answer- False

If you turn the START/STOP selector to STOP in flight will the engine shutdown? -
Answer- Yes when the thrust lever is at idle

What position must the thrust lever be in to enable thrust reverser trigger? - Answer-
Idle

What happens when the ignition switch is selected to OVRD? - Answer- Activates both
igniters on the ground or in flight

What controls the engine? - Answer- FADEC
Full Authority Digital Electronic Control

What controls engine starting and provides hung start, hot start and no light-off
protection? - Answer- FADEC

Does the FADEC provide engine start protection? - Answer- Only on the ground for a
hot start, hung start or no light-off

Is there a protection for hot starts or hung starts during an in flight start? - Answer- No

How are the engine thrust ratings controlled? - Answer- By the FADEC

Document information

Uploaded on
December 3, 2025
Number of pages
4
Written in
2025/2026
Type
Exam (elaborations)
Contains
Questions & answers
$12.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
ScholarExams
3.7
(72)
Sold
405
Followers
186
Items
11904
Last sold
1 day ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions