CITB Test || A+ Guaranteed.
Ladders should never be painted because: correct answers The paint can hide or mask
damaged parts of the ladder
2. You're about to start a new task, how would you know if extra PPE is required? correct
answers The risk assessment will tell you
3. The colour coding for a dry powder fire extinguisher is ___. correct answers Blue
4. Which of the following is NOT a class A material? correct answers Propane
5. What does the health and safety sign below mean? (Stick figure on roof) correct answers
Danger fragile roof
6. Which of these is the LEAST important reason why all accidents must be reported? correct
answers To establish whose fault it was and prosecute them
7. What should you do if you're about to start a job and realize it cannot be done according to
the method statement? correct answers Speak to your supervisor before starting any work
8. Which of these is TRUE if you have to twist or turn your body while lifting and placing a
load? correct answers The amount of weight you can lift safely will be reduced
9. What should you do if you are using a generator to power some lighting and the lamp
blows? correct answers Replace the lamp yourself but ensure you disconnect the lighting
from the generator first
10. You have to adjust an electric hand-tool, what should you do before attempting to adjust
it? correct answers Ensure it's switched off and unplugged
11. What should you do if you notice a worker driving plant equipment way above the site
speed limit? correct answers Report it to a supervisor or manager
12. You are given a task that requires using a power tool and need to carry out a visual
inspection. Which TWO of these should you ensure when carrying out the visual inspection?
(Choose 2 answers) correct answers Ensure the switches, triggers and safety guard are in
good working order and correctly set AND Ensure the power lead, plug and casing are not
damaged
13. Which THREE of these hazards are likely to affect a worker who is using an air-powered
tool? (Choose 3 answers) correct answers They could be struck by a hose that's not properly
secured AND Flying fragments and airborne dust AND Hand arm vibration
14. Which TWO of these would NOT require portable appliance testing (PAT)? (Choose 2
answers) correct answers A Battery-powered drill AND A hammer and bolster
15. What does it mean if you digging and find a run of coloured marker tape? correct answers
There is a buried service
, 16. Which statement below is TRUE when it comes to using gloves while handling
chemicals? correct answers You must choose appropriate gloves because different gloves
protect against different hazards
17. Which of the following hazardous materials should be identified when going through a
construction health and safety checklist? correct answers Lead, solvents, asbestos and cement
18. What health condition is most likely if a worker uses a grinder without adequate hearing
protection? correct answers Hearing damage
19. Which activity could create the biggest risk for lead poisoning in a situation where control
measures are not in place? correct answers Sanding down old paint
20. An excavation should be battered back or stepped if ___. correct answers There is a risk
of the sides falling in, regardless of how deep it is
21. Which TWO are likely consequences for employers who fail to take appropriate measures
to prevent accidents or ill health at work? (Choose 2 answers) correct answers Increased cost
to the employer because of accidents or ill health AND The employer could be fined or
imprisoned
22. You're working with a new chemical/substance and you start to feel ill, what should you
do? correct answers Stop working immediately and report it to your supervisor or manager
23. Which TWO are important factors to consider when it comes to using lifting aids?
(Choose 2 answers) correct answers The person using the lifting aid must be competent, and
trained in using the lifting aid correctly AND The lifting aid must be designed for the task
24. Which of these tasks does NOT cause silica dust to enter into the air? correct answers
Sawing wood
25. What does the health and safety sign below mean? (red sign with symbol on chest)
correct answers Substance can cause long-term serious health problems
26. What type of eye protection is most suitable if there's a risk of materials flying into your
eyes? correct answers Impact-rated glasses
27. You're about to start working and realize that a design detail cannot be built according to
its plans, what TWO things should you do? (Choose 2 answers) correct answers Let your
supervisor know before starting any work AND Do not make any changes unless you have
approval in writing
28. Which TWO of these are likely potential health issues for someone who uses a hammer
drill for long periods of time? (Choose 2 answers) correct answers Carpal tunnel syndrome
AND Vibration white finger
29. Which statement below is TRUE when it comes to lifting a load while sitting down?
correct answers You are likely to lift less while sitting
Ladders should never be painted because: correct answers The paint can hide or mask
damaged parts of the ladder
2. You're about to start a new task, how would you know if extra PPE is required? correct
answers The risk assessment will tell you
3. The colour coding for a dry powder fire extinguisher is ___. correct answers Blue
4. Which of the following is NOT a class A material? correct answers Propane
5. What does the health and safety sign below mean? (Stick figure on roof) correct answers
Danger fragile roof
6. Which of these is the LEAST important reason why all accidents must be reported? correct
answers To establish whose fault it was and prosecute them
7. What should you do if you're about to start a job and realize it cannot be done according to
the method statement? correct answers Speak to your supervisor before starting any work
8. Which of these is TRUE if you have to twist or turn your body while lifting and placing a
load? correct answers The amount of weight you can lift safely will be reduced
9. What should you do if you are using a generator to power some lighting and the lamp
blows? correct answers Replace the lamp yourself but ensure you disconnect the lighting
from the generator first
10. You have to adjust an electric hand-tool, what should you do before attempting to adjust
it? correct answers Ensure it's switched off and unplugged
11. What should you do if you notice a worker driving plant equipment way above the site
speed limit? correct answers Report it to a supervisor or manager
12. You are given a task that requires using a power tool and need to carry out a visual
inspection. Which TWO of these should you ensure when carrying out the visual inspection?
(Choose 2 answers) correct answers Ensure the switches, triggers and safety guard are in
good working order and correctly set AND Ensure the power lead, plug and casing are not
damaged
13. Which THREE of these hazards are likely to affect a worker who is using an air-powered
tool? (Choose 3 answers) correct answers They could be struck by a hose that's not properly
secured AND Flying fragments and airborne dust AND Hand arm vibration
14. Which TWO of these would NOT require portable appliance testing (PAT)? (Choose 2
answers) correct answers A Battery-powered drill AND A hammer and bolster
15. What does it mean if you digging and find a run of coloured marker tape? correct answers
There is a buried service
, 16. Which statement below is TRUE when it comes to using gloves while handling
chemicals? correct answers You must choose appropriate gloves because different gloves
protect against different hazards
17. Which of the following hazardous materials should be identified when going through a
construction health and safety checklist? correct answers Lead, solvents, asbestos and cement
18. What health condition is most likely if a worker uses a grinder without adequate hearing
protection? correct answers Hearing damage
19. Which activity could create the biggest risk for lead poisoning in a situation where control
measures are not in place? correct answers Sanding down old paint
20. An excavation should be battered back or stepped if ___. correct answers There is a risk
of the sides falling in, regardless of how deep it is
21. Which TWO are likely consequences for employers who fail to take appropriate measures
to prevent accidents or ill health at work? (Choose 2 answers) correct answers Increased cost
to the employer because of accidents or ill health AND The employer could be fined or
imprisoned
22. You're working with a new chemical/substance and you start to feel ill, what should you
do? correct answers Stop working immediately and report it to your supervisor or manager
23. Which TWO are important factors to consider when it comes to using lifting aids?
(Choose 2 answers) correct answers The person using the lifting aid must be competent, and
trained in using the lifting aid correctly AND The lifting aid must be designed for the task
24. Which of these tasks does NOT cause silica dust to enter into the air? correct answers
Sawing wood
25. What does the health and safety sign below mean? (red sign with symbol on chest)
correct answers Substance can cause long-term serious health problems
26. What type of eye protection is most suitable if there's a risk of materials flying into your
eyes? correct answers Impact-rated glasses
27. You're about to start working and realize that a design detail cannot be built according to
its plans, what TWO things should you do? (Choose 2 answers) correct answers Let your
supervisor know before starting any work AND Do not make any changes unless you have
approval in writing
28. Which TWO of these are likely potential health issues for someone who uses a hammer
drill for long periods of time? (Choose 2 answers) correct answers Carpal tunnel syndrome
AND Vibration white finger
29. Which statement below is TRUE when it comes to lifting a load while sitting down?
correct answers You are likely to lift less while sitting