WRT (Water Restoration Technician)
Certification 2025/2026 | Complete Exam Prep
What is the most important aspect to the beginning of a job? - correct
answerRisk/Hazard assessment for the safety of all individuals involved
Employers must provide training, a fit test, and a medical evaluation for employees who
will be utilizing what equipment? - correct answerRespirator and cartridges
What should be completed before starting emergency mitigation services? - correct
answerA work authorization (contract) has been signed.
Often found in older structures, lead and asbestos are hazardous materials regulated by
the federal government. - correct answerTrue
Water that has a significant degree of contamination and could cause illness is which of
these? - correct answerCategory 2
Water that is grossly contaminated - correct answerCategory 3
If stopped from removing highly porous materials (carpet) on a Category 3 job, what
should the restorer do? - correct answerStop work to prevent liability
Secondary damage is more likely to occur when relative humidity levels are - correct
answer65%
When a water loss occurs, the most important factor in reducing damage is - correct
answerRapid response to start mitigation procedures
What steps should be taken when working in an area with potential contamination? -
correct answerWear proper PPE, contain the area
Which of the following would be considered category 1 water?
- is grossly contaminated
- from a sanitary source
- has significant contamination
- contains regulated materials - correct answerFrom a sanitary source
Performing a thorough extraction or repeated extractions accomplishes what? - correct
answerreduces drying times
, Water extracted from a jobsite should be - correct answerdisposed of according to local
laws
In a crawlspaces that measures 37' x 42' and has water standing at a depth of 1' 9",
how many total gallons are there? - correct answer20,341 gallons
A moisture reading obtained from an unaffected material that allows the restorer to set
drying goals for the affected structure - correct answerDry standard
When is a drying job done? - correct answera moisture meter indicates we have met our
dry goal
The moisture sensor can be used to verify our drying goal has been met - correct
answerfalse
Moisture sensors and IR camera are effective tools for - correct answerquickly locating
moisture in carpet
What does a thermo-hygrometer measure? - correct answerTemperature and relative
humidity
Why do IR infarred cameras indicate possible moisture in materials? - correct
answerMaterials surface temperature cools as water evaporates
Once an area is identified with an infared camera as a suspect of being wet, that area
must be verified with - correct answerA thermal hygrometer???
Psychometric conditions have a direct effect on the rate at which moisture moves within
materials, as well as from wet materials - correct answerTrue
The amount of moisture in the air, as a percentage of the maximum amount the air
could hold at a given temperature is known as which of these - correct answerRelative
humidity
What is the ratio of the weight of water vapor mixed with one pound of dry air called -
correct answerHumidity ratio
To promote effective drying, restorers need to control - correct answerSurface
temperature of the wet materials, air temperature of the drying chamber, vapor pressure
of the drying chamber
A surface with a temperature at or below dew point results in what? - correct
answerCondensation
If you increase the temperature in a drying chamber, what change will occur in the
relative humidity? - correct answerDecrease
Certification 2025/2026 | Complete Exam Prep
What is the most important aspect to the beginning of a job? - correct
answerRisk/Hazard assessment for the safety of all individuals involved
Employers must provide training, a fit test, and a medical evaluation for employees who
will be utilizing what equipment? - correct answerRespirator and cartridges
What should be completed before starting emergency mitigation services? - correct
answerA work authorization (contract) has been signed.
Often found in older structures, lead and asbestos are hazardous materials regulated by
the federal government. - correct answerTrue
Water that has a significant degree of contamination and could cause illness is which of
these? - correct answerCategory 2
Water that is grossly contaminated - correct answerCategory 3
If stopped from removing highly porous materials (carpet) on a Category 3 job, what
should the restorer do? - correct answerStop work to prevent liability
Secondary damage is more likely to occur when relative humidity levels are - correct
answer65%
When a water loss occurs, the most important factor in reducing damage is - correct
answerRapid response to start mitigation procedures
What steps should be taken when working in an area with potential contamination? -
correct answerWear proper PPE, contain the area
Which of the following would be considered category 1 water?
- is grossly contaminated
- from a sanitary source
- has significant contamination
- contains regulated materials - correct answerFrom a sanitary source
Performing a thorough extraction or repeated extractions accomplishes what? - correct
answerreduces drying times
, Water extracted from a jobsite should be - correct answerdisposed of according to local
laws
In a crawlspaces that measures 37' x 42' and has water standing at a depth of 1' 9",
how many total gallons are there? - correct answer20,341 gallons
A moisture reading obtained from an unaffected material that allows the restorer to set
drying goals for the affected structure - correct answerDry standard
When is a drying job done? - correct answera moisture meter indicates we have met our
dry goal
The moisture sensor can be used to verify our drying goal has been met - correct
answerfalse
Moisture sensors and IR camera are effective tools for - correct answerquickly locating
moisture in carpet
What does a thermo-hygrometer measure? - correct answerTemperature and relative
humidity
Why do IR infarred cameras indicate possible moisture in materials? - correct
answerMaterials surface temperature cools as water evaporates
Once an area is identified with an infared camera as a suspect of being wet, that area
must be verified with - correct answerA thermal hygrometer???
Psychometric conditions have a direct effect on the rate at which moisture moves within
materials, as well as from wet materials - correct answerTrue
The amount of moisture in the air, as a percentage of the maximum amount the air
could hold at a given temperature is known as which of these - correct answerRelative
humidity
What is the ratio of the weight of water vapor mixed with one pound of dry air called -
correct answerHumidity ratio
To promote effective drying, restorers need to control - correct answerSurface
temperature of the wet materials, air temperature of the drying chamber, vapor pressure
of the drying chamber
A surface with a temperature at or below dew point results in what? - correct
answerCondensation
If you increase the temperature in a drying chamber, what change will occur in the
relative humidity? - correct answerDecrease
