Visual Testing VT General questions
with correct answers
which of the following are considered to be potential safety hazards of the welding inspector -
correct answer ✔✔ radiation from the ark
falling during inspections
falling objects
of the following which may be considered either mandatory or non-mandatory - correct answer
✔✔ specifications
standards
the job documents the best describe the size and configuration of a weld are - correct answer
✔✔ drawings
the type of document that has legal status is - correct answer ✔✔ code
something set up an established by authority as a rule to measure value ,weight, etc is - correct
answer ✔✔ Standard
which of the following is not considered a type of joint - correct answer ✔✔ Fillet
that portion of the joint where the two pieces to be joined come closest together is referred to
as the - correct answer ✔✔ joint root
in a complete groove weld the surface of the weld on the side where the weld is done is called -
correct answer ✔✔ weld face
, in a complete weld The junction between the weld face and the base metal is - correct answer
✔✔ the toe
the height of the weld above the base metal in a groove weld is called - correct answer ✔✔
weld reinforcement
the primary element of any welding symbol is referred to as the - correct answer ✔✔ reference
line
information appearing above the reference line refers to the - correct answer ✔✔ other side
the graphic description of the type of weld is called the - correct answer ✔✔ weld symbol
dimensions appearing to the immediate right of the weld symbol generally refer to the - correct
answer ✔✔ weld length
the property of metals that describe their ability to carry some type of load is called - correct
answer ✔✔ strength
the property that describes the ability of a metal to deform to some load is called - correct
answer ✔✔ ductility
the ability of a metal to absorb energy is called - correct answer ✔✔ toughness
the metals property that relates to the metals resistance to indentation is called - correct
answer ✔✔ hardness
with correct answers
which of the following are considered to be potential safety hazards of the welding inspector -
correct answer ✔✔ radiation from the ark
falling during inspections
falling objects
of the following which may be considered either mandatory or non-mandatory - correct answer
✔✔ specifications
standards
the job documents the best describe the size and configuration of a weld are - correct answer
✔✔ drawings
the type of document that has legal status is - correct answer ✔✔ code
something set up an established by authority as a rule to measure value ,weight, etc is - correct
answer ✔✔ Standard
which of the following is not considered a type of joint - correct answer ✔✔ Fillet
that portion of the joint where the two pieces to be joined come closest together is referred to
as the - correct answer ✔✔ joint root
in a complete groove weld the surface of the weld on the side where the weld is done is called -
correct answer ✔✔ weld face
, in a complete weld The junction between the weld face and the base metal is - correct answer
✔✔ the toe
the height of the weld above the base metal in a groove weld is called - correct answer ✔✔
weld reinforcement
the primary element of any welding symbol is referred to as the - correct answer ✔✔ reference
line
information appearing above the reference line refers to the - correct answer ✔✔ other side
the graphic description of the type of weld is called the - correct answer ✔✔ weld symbol
dimensions appearing to the immediate right of the weld symbol generally refer to the - correct
answer ✔✔ weld length
the property of metals that describe their ability to carry some type of load is called - correct
answer ✔✔ strength
the property that describes the ability of a metal to deform to some load is called - correct
answer ✔✔ ductility
the ability of a metal to absorb energy is called - correct answer ✔✔ toughness
the metals property that relates to the metals resistance to indentation is called - correct
answer ✔✔ hardness
