Maryland State InSpectIon-technIcal exaM Study exaM neweSt 2025
coMplete QueStIonS and correct detaIled anSwerS (VerIfIed anSwerS)
|already Graded a+||Brand new VerSIon!!
lash failure for power steering system - correct anSwer-0.4 inches or 10mm
inspect for travel - correct anSwer-turn steering full right and full left
jack front wheels slightly on vehicles without power steering.
check for binding and jamming
inspect for linkage play - correct anSwer-lift front end with wheels straight ahead, apply
brakes,grasp front and rear of tire ,record movement at extreme front or rear of tire
Camber - correct anSwer-inward or outward tilt of the top of the wheel from vertical
Ball joint wear-without wear indicators - correct anSwer-reject for movement exceeding
manufacturer specs
repaired by heating
equipped with tightener or repair kit
Types of ball joints - correct anSwer-wear indicator
, standard
turning torque
preloaded
Steering wheel - correct anSwer-reject for
cracks and breaks
non continuity
not original or equivalent size
objects mounted on column
Inspection for lash - correct anSwer-front wheels straight ahead
turn wheel until motion can be observed at road wheels
engine must be running for vehicles with power steering
Failure for lash - correct anSwer-16 inch wheel 2 inches
18 inch wheel 2 1/4 inches
20 inch wheel 2 1/2 inches
22 inch wheel 2 3/4 inches
Springs and torsion bars - correct anSwer-five or more one four or less none
U bolts are not long enough 1/4 of length
any object sticking below edge of wheel rim
service brake test - correct anSwer-on road at speed of 20mph
smooth stop within 25 feet for passenger cars
30 feet for light trucks
coMplete QueStIonS and correct detaIled anSwerS (VerIfIed anSwerS)
|already Graded a+||Brand new VerSIon!!
lash failure for power steering system - correct anSwer-0.4 inches or 10mm
inspect for travel - correct anSwer-turn steering full right and full left
jack front wheels slightly on vehicles without power steering.
check for binding and jamming
inspect for linkage play - correct anSwer-lift front end with wheels straight ahead, apply
brakes,grasp front and rear of tire ,record movement at extreme front or rear of tire
Camber - correct anSwer-inward or outward tilt of the top of the wheel from vertical
Ball joint wear-without wear indicators - correct anSwer-reject for movement exceeding
manufacturer specs
repaired by heating
equipped with tightener or repair kit
Types of ball joints - correct anSwer-wear indicator
, standard
turning torque
preloaded
Steering wheel - correct anSwer-reject for
cracks and breaks
non continuity
not original or equivalent size
objects mounted on column
Inspection for lash - correct anSwer-front wheels straight ahead
turn wheel until motion can be observed at road wheels
engine must be running for vehicles with power steering
Failure for lash - correct anSwer-16 inch wheel 2 inches
18 inch wheel 2 1/4 inches
20 inch wheel 2 1/2 inches
22 inch wheel 2 3/4 inches
Springs and torsion bars - correct anSwer-five or more one four or less none
U bolts are not long enough 1/4 of length
any object sticking below edge of wheel rim
service brake test - correct anSwer-on road at speed of 20mph
smooth stop within 25 feet for passenger cars
30 feet for light trucks
