COMPLETE QUESTIONS AND SOLUTIONS
⩥ Capacity-based designs tend to provide better performance and
reliability for a typical office environment. Answer: What is the
advantage of using a "capacity-based" approach to WLAN design, as
compared to a "coverage-based" design?
a.Capacity-based designs are more economical
b.A coverage-based design requires more APs
c.Capacity-based designs tend to provide better performance and
reliability for a typical office environment.
d.With a capacity-based design, each AP covers more floor space
⩥ Air Monitor AP Answer: Which of the following APs do not support
end user connectivity?
a.Campus AP
b.Mesh AP
c.Air Monitor AP
,d.Remote AP e.Instant AP
⩥ a. Unlike the MC, an MM can be deployed on both physical and
virtual appliances
b. The MM can push full configurations to all managed devices
d. The MC cannot push L2 and L3 configuration to managed devices.
Answer: AOS8x - Choose all options below that accurately describe the
differences between a Mobility Master (MM) and a Master Controller
(MC)?
a. Unlike the MC, an MM can be deployed on both physical and virtual
appliances
b. The MM can push full configurations to all managed devices
c. You can deploy an MM using either AOS 6. x, or AOS 8. x
d. The MC cannot push L2 and L3 configuration to managed devices.
e. An MM can directly terminate AP tunnels
,⩥ MultiZone Answer: Which HPE Aruba feature enables you to manage
guest and corporate WLANs on the same APs, but with an "Air Wall"
between them?
a. AirMatch
b. AirPlay
c. MultiZone
d. ClientMatch
e. Zone filtering
⩥ a. Licenses are centrally managed by the Mobility Master
b. Configurations that you create in the mn group automatically flows
into all groups below that level
c. You can configure an individual managed device, if you need to
override something in a group configuration Answer: Which statements
below accurately describe Aruba OS 8. x hierarchical configuration?
a. Licenses are centrally managed by the Mobility Master
b. Configurations that you create in the mn group automatically flows
into all groups below that level
, c. You can configure an individual managed device, if you need to
override something in a group configuration
d. You can create hierarchical management groups, but you cannot create
subgroups
e. The system does not automatically create groups. You must create
them all manually.
⩥ a. Zero Touch Provisioning
d. Activate Answer: Which two features help to automate controller
configuration?
a. Zero Touch Provisioning
b. netconf
c. ClearPass
d. Activate
e. MultiTouch