1|Page
OSHA BASIC ORIENTATION PLUS EXAM LATEST
WITH ACTUAL QUESTIONS AND CORRECT
VERIFIED ANSWERS/ALREADY GRADED A+
What is the most frequently cited OSHA violation? -
.....ANSWER ...✔✔ Fall Protection
What key elements are essential to recognizing hazards
and reducing or eliminating workplace hazards? -
.....ANSWER ...✔✔ Management commitment and
employee involvement
You are encouraged to ask your coworkers/supervisor
for information whenever you have a problem or are in
doubt about what to do on a job? - .....ANSWER
...✔✔ True
It is your responsibility to follow all safety regulations,
inform your employer of any unsafe condition; report all
injuries no matter how minor they seem and wear the
proper personal protective equipment? - .....ANSWER
...✔✔ True
,2|Page
The OSHA standard that addresses the requirements for
preventing and lessening the results of a bad release of
toxic, reactive, flammable, or highly explosive
hazardous chemicals from a process - .....ANSWER
...✔✔ Process safety management Standard
The process Hazard Analysis (PHA) is one of the most
important parts of the PSM program. PHAs are used to
identify and evaluate major processes and ensure they
are - .....ANSWER ...✔✔ Evaluated, Controlled, and
Identified
In the PSM standard OSHA states employees must be
trained if they work with highly hazardous chemicals. -
.....ANSWER ...✔✔ True
Facilities are not permitted to control your entrance and
exit in covered process areas. - .....ANSWER ...✔✔
False
What should be your first concern from the moment you
enter the work site? - .....ANSWER ...✔✔ Safety
, 3|Page
Under the Stop Work Authority, you have the right and
obligation to stop a work activity if you have reason to
believe your own safety or a coworkers safety is in
jeopardy or if the work plan is not clearly established or
understood . - .....ANSWER ...✔✔ True
What's needed in order to operate a plant-owned
vehicle or mobile equipment while at a facility -
.....ANSWER ...✔✔ qualified only authorized only
What type of work permits you may encounter on the
job - .....ANSWER ...✔✔ safe work permits confined
space entry permits, hot work permits, line entry or line
breaking permits, lockout/tagout permits
if you are replacing a piece of equipment the new one
should be the same as the one being removed. If its not
you should find out whether the change was on purpose.
what is this called - .....ANSWER ...✔✔ Management
of change
Used only where an immediate life threatening hazard
exists - .....ANSWER ...✔✔ Danger
OSHA BASIC ORIENTATION PLUS EXAM LATEST
WITH ACTUAL QUESTIONS AND CORRECT
VERIFIED ANSWERS/ALREADY GRADED A+
What is the most frequently cited OSHA violation? -
.....ANSWER ...✔✔ Fall Protection
What key elements are essential to recognizing hazards
and reducing or eliminating workplace hazards? -
.....ANSWER ...✔✔ Management commitment and
employee involvement
You are encouraged to ask your coworkers/supervisor
for information whenever you have a problem or are in
doubt about what to do on a job? - .....ANSWER
...✔✔ True
It is your responsibility to follow all safety regulations,
inform your employer of any unsafe condition; report all
injuries no matter how minor they seem and wear the
proper personal protective equipment? - .....ANSWER
...✔✔ True
,2|Page
The OSHA standard that addresses the requirements for
preventing and lessening the results of a bad release of
toxic, reactive, flammable, or highly explosive
hazardous chemicals from a process - .....ANSWER
...✔✔ Process safety management Standard
The process Hazard Analysis (PHA) is one of the most
important parts of the PSM program. PHAs are used to
identify and evaluate major processes and ensure they
are - .....ANSWER ...✔✔ Evaluated, Controlled, and
Identified
In the PSM standard OSHA states employees must be
trained if they work with highly hazardous chemicals. -
.....ANSWER ...✔✔ True
Facilities are not permitted to control your entrance and
exit in covered process areas. - .....ANSWER ...✔✔
False
What should be your first concern from the moment you
enter the work site? - .....ANSWER ...✔✔ Safety
, 3|Page
Under the Stop Work Authority, you have the right and
obligation to stop a work activity if you have reason to
believe your own safety or a coworkers safety is in
jeopardy or if the work plan is not clearly established or
understood . - .....ANSWER ...✔✔ True
What's needed in order to operate a plant-owned
vehicle or mobile equipment while at a facility -
.....ANSWER ...✔✔ qualified only authorized only
What type of work permits you may encounter on the
job - .....ANSWER ...✔✔ safe work permits confined
space entry permits, hot work permits, line entry or line
breaking permits, lockout/tagout permits
if you are replacing a piece of equipment the new one
should be the same as the one being removed. If its not
you should find out whether the change was on purpose.
what is this called - .....ANSWER ...✔✔ Management
of change
Used only where an immediate life threatening hazard
exists - .....ANSWER ...✔✔ Danger
