answers
1) Backflow is the undesirable reversal of flow of water or other
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
substances through a cross connection into the public water |\ |\ |\ |\ |\ |\ |\ |\ |\
system or consumer's: - CORRECT ANSWERS ✔✔C. Public water
|\ |\ |\ |\ |\ |\ |\ |\ |\
system or consumer's portable water system
|\ |\ |\ |\ |\
2) An approved airgap (AG) is a physical separation between the
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
free-flowing end of a: - CORRECT ANSWERS ✔✔D. Potable water |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
supply pipe line in the overflow rim of an open or non-pressurized
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
receiving vessel
|\ |\
3) And indirect cross-connection is one that is subject to what
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
type of backflow? - CORRECT ANSWERS ✔✔A. Only
|\ |\ |\ |\ |\ |\ |\ |\
backsiphonage
4 )Cross-connections with between the portable water piping in
|\ |\ |\ |\ |\ |\ |\ |\ |\
any piping or containers containing substances not approved as
|\ |\ |\ |\ |\ |\ |\ |\ |\
potable water must be either eliminated or controlled by the
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
installation of an: - CORRECT ANSWERS ✔✔D. Approved air gap
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
or an approved backflow prevention assembly
|\ |\ |\ |\ |\
5) While testing CV #2 of a DCVA if CV #2 leaks the BAT would
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
observe that the water flow: - CORRECT ANSWERS ✔✔D. Stops
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
from the site tube at TC#4 and no differential shows on the
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
gauge
, 6) Service protection is a way to protect a public water system
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
from contamination due to back flow from the customer's water
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
system by the installing an approved backflow preventer at the: -
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
CORRECT ANSWERS ✔✔A. Service connection which is
|\ |\ |\ |\ |\ |\ |\ |\
considered to be at or near the water meter |\ |\ |\ |\ |\ |\ |\ |\
7) A Washington state certified Backflow Assembly Tester is
|\ |\ |\ |\ |\ |\ |\ |\ |\
certified to: - CORRECT ANSWERS ✔✔D. Inspect, test and monitor
|\ |\ |\ |\ |\ |\ |\ |\ |\
backflow prevention assemblies
|\ |\ |\
8) The RPBA is designed so that if the check valve leaks, the
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
relief with valve may: - CORRECT ANSWERS ✔✔B. Open to
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
discharge through the relief valve vent |\ |\ |\ |\ |\
9) An AG installed in lieu of an approved backflow prevention
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
assembly must be inspected for compliance with the definition of
|\ |\ |\ |\ |\ |\ |\ |\ |\
an improved air gap by: - CORRECT ANSWERS ✔✔C. Either a CCS
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
or a BAT
|\ |\ |\
10) After testing an approved backflow prevention assembly the
|\ |\ |\ |\ |\ |\ |\ |\ |\
BAT shall complete a test report that is acceptable to the: -
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
CORRECT ANSWERS ✔✔C. Purveyor |\ |\ |\
11) The gauge on a differential pressure test kit indicates: -
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
CORRECT ANSWERS ✔✔C. psid |\ |\ |\
12) Loading a check valve with springs or weights: - CORRECT
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
ANSWERS ✔✔C. Reduces pressure down stream of the check |\ |\ |\ |\ |\ |\ |\ |\ |\
valve