MN Dental Assisting Licensure Exam , Most Recent Exam
2025/2026 Actual Complete Real Exam Questions And
Correct Answers (Verified Answers) Already Graded
A+ | Accurate Answers | Already Graded A+ |
GuarantedSuccess!! | Newest Exam |
Just Released!!
What would occur if there were a delay between mixing a
luting material and
placing the indirect restoration? - ANSWER-
Initial set begins
How should dental cements be dispensed for mixing? -
ANSWER-dispense the
powder first, and then
the liquid
Which cement that gives off an exothermic reaction and must
be speculated over a wide area on a cool, dry, thick glass slab?
- ANSWER-Zinc Phosphate
How should cement be placed into an indirect restoration
for delivery? -
ANSWER-Add a thin lingin to cover all internal walls
of the casting.
,When compared to zinc phosphate cement, which
statement regarding
polycarboxylate cement is correct? - ANSWER-It is less
irritating to the pulp.
Which type of glass ionomer cement is designed for restoring
areas of erosion
near the gingiva? -
ANSWER-II
Which type of cement is preferred for cementation of
ceramic veneers? -
ANSWER-Composite
resin
When compote resin is used, how should the tooth surface
be prepared? -
ANSWER-Free of all plaque and
debris
Sprayed with water before
cementation
What could occur if excess cement is left at the cavosurface
margin of a crown?
- ANSWER-Irritate the area and cause
inflammation
Which item listed would not use luting cement for placement? -
ANSWER-Direct
,provisional
restorations
Which statement best represents the dental assistant's priority
when preparing
dental cements? - ANSWER-Follow the manufacturer's
instructions.
Which factor(s) influences the cementation procedure? -
ANSWER-Humidity
Temperature
Mixing time
When working with dental cements, which statement is
incorrect regarding minimizing water loss through evaporation?
- ANSWER-Dispense the liquid first and then powder.
What step(s) should be followed before dispensing
cement powder? -
ANSWER-Fluff the
powder
Measure the
powder
Which cement inhibits recurrent decay? - ANSWER-glass
ionomer
Which type of glass ionomer cement is used to cement
orthodontic appliances?
, -
ANSWER-
I
How should glass ionomer cement be mixed to increase the
working time? -
ANSWER-On a glass
slab
Which factor is not an advantage of using glass ionomer
in premeasured
capsules? - ANSWER-Results
can vary
Which type(s) of cements can be light-cured? - ANSWER-
composite resin and
glass
ionomer
What type of cement is frequently used to cement
provisional crowns? -
ANSWER-Type 1
ZOE
Which method would not be used to remove excess cement
from an indirect
restoration? - ANSWER-Move instruments in a
horizontal direction.
2025/2026 Actual Complete Real Exam Questions And
Correct Answers (Verified Answers) Already Graded
A+ | Accurate Answers | Already Graded A+ |
GuarantedSuccess!! | Newest Exam |
Just Released!!
What would occur if there were a delay between mixing a
luting material and
placing the indirect restoration? - ANSWER-
Initial set begins
How should dental cements be dispensed for mixing? -
ANSWER-dispense the
powder first, and then
the liquid
Which cement that gives off an exothermic reaction and must
be speculated over a wide area on a cool, dry, thick glass slab?
- ANSWER-Zinc Phosphate
How should cement be placed into an indirect restoration
for delivery? -
ANSWER-Add a thin lingin to cover all internal walls
of the casting.
,When compared to zinc phosphate cement, which
statement regarding
polycarboxylate cement is correct? - ANSWER-It is less
irritating to the pulp.
Which type of glass ionomer cement is designed for restoring
areas of erosion
near the gingiva? -
ANSWER-II
Which type of cement is preferred for cementation of
ceramic veneers? -
ANSWER-Composite
resin
When compote resin is used, how should the tooth surface
be prepared? -
ANSWER-Free of all plaque and
debris
Sprayed with water before
cementation
What could occur if excess cement is left at the cavosurface
margin of a crown?
- ANSWER-Irritate the area and cause
inflammation
Which item listed would not use luting cement for placement? -
ANSWER-Direct
,provisional
restorations
Which statement best represents the dental assistant's priority
when preparing
dental cements? - ANSWER-Follow the manufacturer's
instructions.
Which factor(s) influences the cementation procedure? -
ANSWER-Humidity
Temperature
Mixing time
When working with dental cements, which statement is
incorrect regarding minimizing water loss through evaporation?
- ANSWER-Dispense the liquid first and then powder.
What step(s) should be followed before dispensing
cement powder? -
ANSWER-Fluff the
powder
Measure the
powder
Which cement inhibits recurrent decay? - ANSWER-glass
ionomer
Which type of glass ionomer cement is used to cement
orthodontic appliances?
, -
ANSWER-
I
How should glass ionomer cement be mixed to increase the
working time? -
ANSWER-On a glass
slab
Which factor is not an advantage of using glass ionomer
in premeasured
capsules? - ANSWER-Results
can vary
Which type(s) of cements can be light-cured? - ANSWER-
composite resin and
glass
ionomer
What type of cement is frequently used to cement
provisional crowns? -
ANSWER-Type 1
ZOE
Which method would not be used to remove excess cement
from an indirect
restoration? - ANSWER-Move instruments in a
horizontal direction.
