CWB LEVEL 1 EXAM PREP QUESTIONS AND CORRECT DETAILED
ANSWERS WITH RATIONALES |ALREADY GRADED A+||BRAND
NEW!!
1. Terms in this set (30) QUESTIONS VERIFIED ANSWERS
2. The welding inspector's role in welding before welding starts
begins:
3. Prior to welding, the welding inspector approved welding procedures are
should check that the: available and the welders are
qualified
4. Which is not the function of the welding Developing a repair procedure
inspector?
5. If during a manufacturing inspection, record the details of the crack,
cracking is found on the outside of a immediately draw it to the
pressure vessel weld, the inspector shall: attention of the welding supervisor
or the welder and check that it is
repaired in accordance with an
authorized repair procedure
6. The Material Test Report (MTR) is a (an) important document that provides
the owner (and the fabricator) with
, the ability to identify properly
qualified materials.
7. The material test report (MRT) provides mechanical test results
that confirm that the product
covered meets the specification.
8. Reports produced by the welding inspector neat and accurate
should be;
9. When reviewing a fabricator's ITP on behalf indicate any hold points so that he
of the client, the welding inspector should: may witness specific activities
10. Which information would be expected on The point in the project at which
the fabricator's ITP? welding starts
11. Following completion of the welding checks that all the required welds
operation, the welding inspector: have been made
12. Steels meeting any grade of CAN/CSA- CAN / CSA-40.20
40.21 must also meet the requirements of:
13. Which information might be found on an Chemical analysis
MTR (mill test report or certificate)
14. What may be required if the inspector or Confirmation of the chemistry
purchaser doubts that a material meets the using PMI (positive material
chemistry of the quoted specification? identification)
15. Material to be welded should be checked for weathering or transportation
physical condition prior to fabrication. This damage
inspection might reveal:
ANSWERS WITH RATIONALES |ALREADY GRADED A+||BRAND
NEW!!
1. Terms in this set (30) QUESTIONS VERIFIED ANSWERS
2. The welding inspector's role in welding before welding starts
begins:
3. Prior to welding, the welding inspector approved welding procedures are
should check that the: available and the welders are
qualified
4. Which is not the function of the welding Developing a repair procedure
inspector?
5. If during a manufacturing inspection, record the details of the crack,
cracking is found on the outside of a immediately draw it to the
pressure vessel weld, the inspector shall: attention of the welding supervisor
or the welder and check that it is
repaired in accordance with an
authorized repair procedure
6. The Material Test Report (MTR) is a (an) important document that provides
the owner (and the fabricator) with
, the ability to identify properly
qualified materials.
7. The material test report (MRT) provides mechanical test results
that confirm that the product
covered meets the specification.
8. Reports produced by the welding inspector neat and accurate
should be;
9. When reviewing a fabricator's ITP on behalf indicate any hold points so that he
of the client, the welding inspector should: may witness specific activities
10. Which information would be expected on The point in the project at which
the fabricator's ITP? welding starts
11. Following completion of the welding checks that all the required welds
operation, the welding inspector: have been made
12. Steels meeting any grade of CAN/CSA- CAN / CSA-40.20
40.21 must also meet the requirements of:
13. Which information might be found on an Chemical analysis
MTR (mill test report or certificate)
14. What may be required if the inspector or Confirmation of the chemistry
purchaser doubts that a material meets the using PMI (positive material
chemistry of the quoted specification? identification)
15. Material to be welded should be checked for weathering or transportation
physical condition prior to fabrication. This damage
inspection might reveal:
