1|Page
CLEET Certification Phase 4 Exam 2025 – Advanced Oklahoma
Law Enforcement Training and Firearms Qualification Guide
Ace your CLEET Certification Phase 4 Exam with this updated 2025 study and training guide.
Covers firearms qualification, defensive tactics, legal procedures, and advanced patrol
operations required for Oklahoma law enforcement CLEET Phase IV certification.
• CLEET Phase 4 certification exam
• CLEET Phase IV Oklahoma
• CLEET advanced law enforcement training
What clearly defines a personal liability for misuse of or misconduct with a firearm? - ANSWER-
The law- Municipal, county, state, and federal ordinances or statues
Your conscience and any personal code of this make you responsible for handling and storing a
firearm safety. - ANSWER-Moral responsibility
You should store the firearm and it's ammunition separately in separate, locked boxes that are
secure. True or False? - ANSWER-True
The enclosure over the underside of the frame that protects the trigger is called what? -
ANSWER-Trigger Guard (Revolver)
The part that fits into the frame and is chambered for a specific caliber of ammunition is called
what? - ANSWER-Cylinder (Revolver)
, 2|Page
A common cause of malfunctions in a semi-automatic pistol is a dirty or damaged magazine.
True or False. - ANSWER-True
Houses the barrel, slide return spring, and chamber is called a what? - ANSWER-Slide
The action of the slide initiates the unloading and reloading sequence. True or False. - ANSWER-
True
The lever, normally found on the left side slide, that disengages the firing mechanism when
activated and prevents the pistol from being fired is called what? - ANSWER-Safety / De-cocking
Lever
The enclosure over the underside of the frame that protects the trigger is called what? -
ANSWER-Trigger guard (Semi-automatic)
In the event of a SQUIB load you should do what? - ANSWER-(1) Cease firing immediately. If you
are in doubt about whether it is a squib load, cease firing; (2) Keep the firearm pointed down
range; (3) Raise your off-gun hand to signal a line officer. Do not attempt to clear the
malfunction.
If someone speaks to you on the firing line what should you do? - ANSWER-Listen, but DO NOT
turn around! Keep the firearm pointed down range, or holstered.
How do you transfer a REVOLVER? - ANSWER-Open the cylinder, unload the firearm, and
present the firearm grip first (with the muzzle down).
With a REVOLVER! - ANSWER-(1) When the cylinder is opened, all rounds are emptied into the
shooter's hand and counted; (2) Once the rounds are accounted for, grasp the firearm by the
top strap and present the firearm grip first (muzzle pointing to the ground).
CLEET Certification Phase 4 Exam 2025 – Advanced Oklahoma
Law Enforcement Training and Firearms Qualification Guide
Ace your CLEET Certification Phase 4 Exam with this updated 2025 study and training guide.
Covers firearms qualification, defensive tactics, legal procedures, and advanced patrol
operations required for Oklahoma law enforcement CLEET Phase IV certification.
• CLEET Phase 4 certification exam
• CLEET Phase IV Oklahoma
• CLEET advanced law enforcement training
What clearly defines a personal liability for misuse of or misconduct with a firearm? - ANSWER-
The law- Municipal, county, state, and federal ordinances or statues
Your conscience and any personal code of this make you responsible for handling and storing a
firearm safety. - ANSWER-Moral responsibility
You should store the firearm and it's ammunition separately in separate, locked boxes that are
secure. True or False? - ANSWER-True
The enclosure over the underside of the frame that protects the trigger is called what? -
ANSWER-Trigger Guard (Revolver)
The part that fits into the frame and is chambered for a specific caliber of ammunition is called
what? - ANSWER-Cylinder (Revolver)
, 2|Page
A common cause of malfunctions in a semi-automatic pistol is a dirty or damaged magazine.
True or False. - ANSWER-True
Houses the barrel, slide return spring, and chamber is called a what? - ANSWER-Slide
The action of the slide initiates the unloading and reloading sequence. True or False. - ANSWER-
True
The lever, normally found on the left side slide, that disengages the firing mechanism when
activated and prevents the pistol from being fired is called what? - ANSWER-Safety / De-cocking
Lever
The enclosure over the underside of the frame that protects the trigger is called what? -
ANSWER-Trigger guard (Semi-automatic)
In the event of a SQUIB load you should do what? - ANSWER-(1) Cease firing immediately. If you
are in doubt about whether it is a squib load, cease firing; (2) Keep the firearm pointed down
range; (3) Raise your off-gun hand to signal a line officer. Do not attempt to clear the
malfunction.
If someone speaks to you on the firing line what should you do? - ANSWER-Listen, but DO NOT
turn around! Keep the firearm pointed down range, or holstered.
How do you transfer a REVOLVER? - ANSWER-Open the cylinder, unload the firearm, and
present the firearm grip first (with the muzzle down).
With a REVOLVER! - ANSWER-(1) When the cylinder is opened, all rounds are emptied into the
shooter's hand and counted; (2) Once the rounds are accounted for, grasp the firearm by the
top strap and present the firearm grip first (muzzle pointing to the ground).
