INTRODUCTION TO NETWORK SIMULATIONS
WITH CISCO MODELING LABS PROCTORED
LATEST UPDATED 2026 GRADED A
◉Node and Image Definitions interface . Answer: The interface
available from the Tools button that provides details on all the images
currently available on a Cisco Modeling Labs installation.
◉REST . Answer: The type of API that Cisco Modeling Labs is built on.
◉Access console . Answer: Right-click on the node in the topology view
and choose 'Console.'
◉Included nodes . Answer: Cisco IOSv, Cisco CAT 8000V, Desktop,
Cisco NX-OS 9000.
◉Connect interfaces . Answer: Right-click on one node and choose Add
Link from menu.
◉Change lab title . Answer: Click on the lab title at the top of the
workbench to access a drop-down field.
, ◉Start lab from workbench . Answer: 1) Use the Start button on the
toolbar at the top 2) Click on LAB in the toolbar and click Start Lab.
◉Change startup configuration . Answer: Stop and wipe the node.
◉Wipe a lab or node . Answer: Erase the resources associated with the
virtual machine for the node.
◉Interface types . Answer: Console and VNC.
◉PANES button . Answer: Workbench button used to provide access to
open console or VNC connections to nodes in a simulation.
◉External Connector . Answer: Node type used to connect a lab
simulation to the 'real network' through the Cisco Modeling Lab server's
network interfaces.
◉Berkeley Packet Filter (BPF) . Answer: Type of filter used to restrict
the packets captured on a link in Cisco Modeling Labs.
◉NAT mode . Answer: Mode used to configure an external connector
that was being used to provide inbound management connectivity to
simulated hosts.
WITH CISCO MODELING LABS PROCTORED
LATEST UPDATED 2026 GRADED A
◉Node and Image Definitions interface . Answer: The interface
available from the Tools button that provides details on all the images
currently available on a Cisco Modeling Labs installation.
◉REST . Answer: The type of API that Cisco Modeling Labs is built on.
◉Access console . Answer: Right-click on the node in the topology view
and choose 'Console.'
◉Included nodes . Answer: Cisco IOSv, Cisco CAT 8000V, Desktop,
Cisco NX-OS 9000.
◉Connect interfaces . Answer: Right-click on one node and choose Add
Link from menu.
◉Change lab title . Answer: Click on the lab title at the top of the
workbench to access a drop-down field.
, ◉Start lab from workbench . Answer: 1) Use the Start button on the
toolbar at the top 2) Click on LAB in the toolbar and click Start Lab.
◉Change startup configuration . Answer: Stop and wipe the node.
◉Wipe a lab or node . Answer: Erase the resources associated with the
virtual machine for the node.
◉Interface types . Answer: Console and VNC.
◉PANES button . Answer: Workbench button used to provide access to
open console or VNC connections to nodes in a simulation.
◉External Connector . Answer: Node type used to connect a lab
simulation to the 'real network' through the Cisco Modeling Lab server's
network interfaces.
◉Berkeley Packet Filter (BPF) . Answer: Type of filter used to restrict
the packets captured on a link in Cisco Modeling Labs.
◉NAT mode . Answer: Mode used to configure an external connector
that was being used to provide inbound management connectivity to
simulated hosts.
