JATC Exam Questions & Answers Guaranteed A+ Score: Latest Updated

JATC Exam Questions & Answers Guaranteed A+ Score: Latest Updated Operating temp for TIC - Answer- -4 to 300 for 15min 500 for 5 min tic battery life - Answer- 4 hours at room temp under typical use Tic drop resistance - Answer- 6.6 ft Tic weight - Answer- 3lbs lanyard takes 5 to extend Tic power on - Answer- Green button takes less 17 seconds to start hold for 10 seconds to turn off 3 for sleep mode Tic 5 Modes - Answer- Basic Black & white Fire mode Search and rescue Heat detection Tic overheating indicator - Answer- Means camera is at 500 and will shut off in 5min if not cooled Tic green icons - Answer- Basic Black and white Fire Auto switches between high and low sensitivity Tic blue icons - Answer- Search and rescue Heat detection Locked in high sensitivity Tic low sensitivity - Answer- 0-1202 degrees Tic high sensitivity - Answer- -4 -302 Basic mode - Answer- Default mode Most useful for fire attack Heat colorization begins at 302 degrees Yellow cold red hot Black and white mode - Answer- Basic mode but does not use heat colorization. White hot Fire mode - Answer- Like basic mode but heat colorization begins at a higher temp between 482 and 1202 good for a lot of open flames Search and rescue mode - Answer- High contrast High sensitivity Good for landscapes buildings and traffic accident scenes Heat detection mode - Answer- Good for hotspots after a fire Also good for thermal patterns like kids that were in a car seat at an accident Search for people in water Colorizes the highest 20% of heat in view Spot meter - Answer- Square in the middle temp reads in bottom right hand corner Low alarm for O2 - Answer- 19.5% High Alarm for O2 - Answer- 23.5 Low Alarm CH4 (methane/Natural Gas) - Answer- 10% of the LEL High Alarm for CH4 (methane/Natural Gas) - Answer- 20% of LEL 50% for HIGH/HIGH Alarm Low Alarm for CO - Answer- 35ppm high alarm for co - Answer- 70ppm low alarm H2S (hydrogen sulfide) - Answer- 10ppm High alarm H2S (hydrogen sulfide) - Answer- 20ppm low alarm HCN(Hydrogen cyanide) - Answer- 4.7ppm high alarm HCN(Hydrogen cyanide) - Answer- 10ppm P400 IDS - Answer- Immediate detection system. P400 begins to tick until low alarm is reached will display % of low alarm device is reading. T icon appears P400 3 types of alarms - Answer- Audible Visual Vibration 200 Bed - Answer- 160/50 nozzle pump @ 100 250 bed - Answer- 7/8 SB pump @ 110 2 in crosslay - Answer- 1 in S/b pump @ 100 Deck gun - Answer- 1 3/8 tip pump @ 110 or whatever handlines are pumped at MQA - Answer- 1 1/4 tip Pump at 120 or whatever handlines are being pumped at