1
For Expert help and assignment solutions, +254707240657
AVIXA Recognized AV Technologist Test
Questions and Answers (100% Correct
Answers) Already Graded A+
A signal transmitted at the proper level will _____ over distance.—
Ans: decrease in signal strength or amplitude
If voltage stayed the same and current increased, resistance
would have _____.—Ans: decreased
© 2025 Assignment Expert
What is an example of Transmissive display technology?—Ans:
LCD
What is the purpose of a wall wash in a three-point lighting
Guru01 - Stuvia
system?—Ans: It lights the background and adds depth
What does a sightline study determine?—Ans: the most
appropriate seating layout and screen position
Lower sensitivity microphones may be used in order to _____.—Ans:
capture high sound pressure level sources, such as a singer
What is the definition of "frequency?"—Ans: the number of times a
complete cycle occurs per second
What are some common applications for automatic mixers?—Ans:
Speech applications, such as meetings.
What type of wave has the highest frequency in the range of the
electromagnetic spectrum?—Ans: ultraviolet
The dimensions of antennas used for RF transmission are directly
related to the _____.—Ans: carrier frequency
The R, G, and B video signals in an analog computer display
output are typically ____.—Ans: kept separate in order to preserve
the best quality
What is an advantage for using IPv6 over IPv4?—Ans: IPv6 has
more available addresses than IPv4.
, 2
For Expert help and assignment solutions, +254707240657
A cable's bend radius is best defined as the _____.—Ans: Amount
a cable can be bent before the signal is compromised or the
conductor is damaged
If the display creates an image by passing light through a
medium, what display technology is it using?—Ans: transmissive
The loudspeakers in a distributed system are located ____.—Ans:
at regularly spaced intervals throughout the listening area
What is a factor for determining the speed of a Wi-Fi
connection?—Ans: protocol version
Which of the following statements describes a DC circuit?—Ans:
current in a DC circuit flows in one direction only
© 2025 Assignment Expert
What is throw distance?—Ans: the distance between the screen
and the projector
What kind of display device has pixels that are filled with a liquid
Guru01 - Stuvia
crystal compound?—Ans: LCD
What type of loudspeaker is typically used to reproduce mid to
high frequency sounds?—Ans: horn
Audio signals may be purposely delayed in sound reinforcement
applications to ensure that _____.—Ans: multiple sound sources
will reach listeners at the same time
The quality of digital recordings will _____ as more copies are
made.—Ans: remain the same
What does bit depth determine?—Ans: the number of states you
have to define a value
A _____ connects different types of networks.—Ans: bridge
What is the light source of an OLED?—Ans: the OLED itself
What is an advantage of lossless compression?—Ans: Files can be
opened and recompressed repeatedly without data loss.
If the start frequency is 6 MHz, and the end frequency is 18 MHz,
what is the bandwidth?—Ans: 12 MHz
For Expert help and assignment solutions, +254707240657
AVIXA Recognized AV Technologist Test
Questions and Answers (100% Correct
Answers) Already Graded A+
A signal transmitted at the proper level will _____ over distance.—
Ans: decrease in signal strength or amplitude
If voltage stayed the same and current increased, resistance
would have _____.—Ans: decreased
© 2025 Assignment Expert
What is an example of Transmissive display technology?—Ans:
LCD
What is the purpose of a wall wash in a three-point lighting
Guru01 - Stuvia
system?—Ans: It lights the background and adds depth
What does a sightline study determine?—Ans: the most
appropriate seating layout and screen position
Lower sensitivity microphones may be used in order to _____.—Ans:
capture high sound pressure level sources, such as a singer
What is the definition of "frequency?"—Ans: the number of times a
complete cycle occurs per second
What are some common applications for automatic mixers?—Ans:
Speech applications, such as meetings.
What type of wave has the highest frequency in the range of the
electromagnetic spectrum?—Ans: ultraviolet
The dimensions of antennas used for RF transmission are directly
related to the _____.—Ans: carrier frequency
The R, G, and B video signals in an analog computer display
output are typically ____.—Ans: kept separate in order to preserve
the best quality
What is an advantage for using IPv6 over IPv4?—Ans: IPv6 has
more available addresses than IPv4.
, 2
For Expert help and assignment solutions, +254707240657
A cable's bend radius is best defined as the _____.—Ans: Amount
a cable can be bent before the signal is compromised or the
conductor is damaged
If the display creates an image by passing light through a
medium, what display technology is it using?—Ans: transmissive
The loudspeakers in a distributed system are located ____.—Ans:
at regularly spaced intervals throughout the listening area
What is a factor for determining the speed of a Wi-Fi
connection?—Ans: protocol version
Which of the following statements describes a DC circuit?—Ans:
current in a DC circuit flows in one direction only
© 2025 Assignment Expert
What is throw distance?—Ans: the distance between the screen
and the projector
What kind of display device has pixels that are filled with a liquid
Guru01 - Stuvia
crystal compound?—Ans: LCD
What type of loudspeaker is typically used to reproduce mid to
high frequency sounds?—Ans: horn
Audio signals may be purposely delayed in sound reinforcement
applications to ensure that _____.—Ans: multiple sound sources
will reach listeners at the same time
The quality of digital recordings will _____ as more copies are
made.—Ans: remain the same
What does bit depth determine?—Ans: the number of states you
have to define a value
A _____ connects different types of networks.—Ans: bridge
What is the light source of an OLED?—Ans: the OLED itself
What is an advantage of lossless compression?—Ans: Files can be
opened and recompressed repeatedly without data loss.
If the start frequency is 6 MHz, and the end frequency is 18 MHz,
what is the bandwidth?—Ans: 12 MHz
