MSF COURSE EOC EXAM QUESTIONS AND ANSWERS
2025/2026 GRADED A+
✔✔What does the Turn Signal Switch do? - ✔✔Activates turn signals; often cancels
automatically after a turn.
✔✔What is the High-Low Beam Switch for? - ✔✔Switches between high and low
headlight beams.
✔✔What does T-CLOCS stand for in pre-ride inspection? - ✔✔Tires, Controls, Lights,
Oil, Chassis, and Stands.
✔✔What should you inspect under "Tires" in T-CLOCS? - ✔✔Condition, tread depth, air
pressure, and wear.
✔✔What should you inspect under "Controls" in T-CLOCS? - ✔✔Levers, pedals,
cables, throttle, and brakes.
✔✔What does the "Lights" check in T-CLOCS involve? - ✔✔Making sure all lights and
signals are working.
✔✔What fluids are checked under "Oil & Other Fluids"? - ✔✔Engine oil, brake fluid, and
coolant. Also check for leaks.
✔✔What is checked under "Chassis"? - ✔✔Frame condition, cracks, or loose
connections.
✔✔: What is checked under "Stands"? - ✔✔Functionality and condition of the kickstand
and center stand.
✔✔Where is the horn button and how is it operated? - ✔✔It's near the left handgrip and
operated with the thumb.
✔✔Where is the engine start button usually located? - ✔✔Near the right handgrip,
operated with the thumb.
✔✔What does the speedometer show? - ✔✔The road speed of the motorcycle.
✔✔What does the odometer show? - ✔✔the total miles ridden. It may also include a re-
settable trip meter.
✔✔What does the tachometer show? - ✔✔Engine speed in revolutions per minute
(RPM), with a red zone for max speed.
, ✔✔What do indicator lights display? - ✔✔Status for neutral, high beam, turn signals, oil
pressure, side stand, etc.
✔✔What is the purpose of mirrors on a motorcycle? - ✔✔To see what's behind. They
are convex, providing a wider view but making objects appear farther away.
✔✔What supports the motorcycle when parked? - ✔✔The side stand. Some also have a
center stand for stability and maintenance.
✔✔: What does FINE-C stand for in the engine start routine? - ✔✔Fuel, Ignition,
Neutral, Engine cut-off switch, Choke and Clutch.
✔✔What is the "Fuel" step in FINE-C? - ✔✔Turn the fuel supply valve On, if equipped.
✔✔What does the "Ignition" step in FINE-C involve? - ✔✔Turn the ignition switch to On;
indicator lights should come on.
✔✔What does "Neutral" mean in FINE-C? - ✔✔Transmission is in neutral; the green
light is on, and the bike rolls freely.
✔✔What should you do with the engine cut-off switch before starting? - ✔✔Move it to
the Run/On position.
✔✔What's the last step in FINE-C for a cold engine? - ✔✔Use the choke (if needed)
and squeeze in the clutch lever.
✔✔What should you do before pressing the starter button? - ✔✔Apply at least one
brake and fully squeeze the clutch lever.
✔✔What happens if you use the throttle with the choke On? - ✔✔Too much fuel may
enter the engine, making starting harder.
✔✔Why might an engine not start or stall when in gear? - ✔✔The side stand may be
down, which prevents starting or causes stalling when shifting into gear.
✔✔What is the engine stop procedure? - ✔✔Thumb (cut-off switch), Key (ignition Off),
Valve (fuel supply Off).
✔✔What is the friction zone? - ✔✔The small area in the clutch lever's travel that
connects/disconnects power to the rear wheel.
✔✔What should you do if you lose control of the motorcycle? - ✔✔Squeeze in the
clutch fully and use the brakes as needed.
2025/2026 GRADED A+
✔✔What does the Turn Signal Switch do? - ✔✔Activates turn signals; often cancels
automatically after a turn.
✔✔What is the High-Low Beam Switch for? - ✔✔Switches between high and low
headlight beams.
✔✔What does T-CLOCS stand for in pre-ride inspection? - ✔✔Tires, Controls, Lights,
Oil, Chassis, and Stands.
✔✔What should you inspect under "Tires" in T-CLOCS? - ✔✔Condition, tread depth, air
pressure, and wear.
✔✔What should you inspect under "Controls" in T-CLOCS? - ✔✔Levers, pedals,
cables, throttle, and brakes.
✔✔What does the "Lights" check in T-CLOCS involve? - ✔✔Making sure all lights and
signals are working.
✔✔What fluids are checked under "Oil & Other Fluids"? - ✔✔Engine oil, brake fluid, and
coolant. Also check for leaks.
✔✔What is checked under "Chassis"? - ✔✔Frame condition, cracks, or loose
connections.
✔✔: What is checked under "Stands"? - ✔✔Functionality and condition of the kickstand
and center stand.
✔✔Where is the horn button and how is it operated? - ✔✔It's near the left handgrip and
operated with the thumb.
✔✔Where is the engine start button usually located? - ✔✔Near the right handgrip,
operated with the thumb.
✔✔What does the speedometer show? - ✔✔The road speed of the motorcycle.
✔✔What does the odometer show? - ✔✔the total miles ridden. It may also include a re-
settable trip meter.
✔✔What does the tachometer show? - ✔✔Engine speed in revolutions per minute
(RPM), with a red zone for max speed.
, ✔✔What do indicator lights display? - ✔✔Status for neutral, high beam, turn signals, oil
pressure, side stand, etc.
✔✔What is the purpose of mirrors on a motorcycle? - ✔✔To see what's behind. They
are convex, providing a wider view but making objects appear farther away.
✔✔What supports the motorcycle when parked? - ✔✔The side stand. Some also have a
center stand for stability and maintenance.
✔✔: What does FINE-C stand for in the engine start routine? - ✔✔Fuel, Ignition,
Neutral, Engine cut-off switch, Choke and Clutch.
✔✔What is the "Fuel" step in FINE-C? - ✔✔Turn the fuel supply valve On, if equipped.
✔✔What does the "Ignition" step in FINE-C involve? - ✔✔Turn the ignition switch to On;
indicator lights should come on.
✔✔What does "Neutral" mean in FINE-C? - ✔✔Transmission is in neutral; the green
light is on, and the bike rolls freely.
✔✔What should you do with the engine cut-off switch before starting? - ✔✔Move it to
the Run/On position.
✔✔What's the last step in FINE-C for a cold engine? - ✔✔Use the choke (if needed)
and squeeze in the clutch lever.
✔✔What should you do before pressing the starter button? - ✔✔Apply at least one
brake and fully squeeze the clutch lever.
✔✔What happens if you use the throttle with the choke On? - ✔✔Too much fuel may
enter the engine, making starting harder.
✔✔Why might an engine not start or stall when in gear? - ✔✔The side stand may be
down, which prevents starting or causes stalling when shifting into gear.
✔✔What is the engine stop procedure? - ✔✔Thumb (cut-off switch), Key (ignition Off),
Valve (fuel supply Off).
✔✔What is the friction zone? - ✔✔The small area in the clutch lever's travel that
connects/disconnects power to the rear wheel.
✔✔What should you do if you lose control of the motorcycle? - ✔✔Squeeze in the
clutch fully and use the brakes as needed.
