BMW Associate Level ASE Certification Exam: Practice
Questions and Answers (Updated for 2025/2026)
1 A lifting pad must be in place to lift a BMW vehicle. True or False? True
BMW requires lifting pads on all models to prevent frame damage; using the
diff cover or axle is prohibited.
2 Under which section in TIS is the User Manual for the DEUTRONIC
battery charger located? Tools and Equipment TIS organizes manuals by
category; search "DEUTRONIC" under this tab for charging procedures.
3 Regarding BMW instrument cluster test function: Tech A states the cluster
can be unlocked, and a test function can be used to display fuel level reading
in liters. Tech B states current BMW instrument clusters are unlocked by
using sum of the last 5 digits of the VIN. Who is correct? Both A and B
Unlocking via VIN sum (e.g., for F-series) and test mode for fuel (in liters) are
standard diagnostics.
4 Which BMW vehicles use Li-Ion batteries? F80 / F82 / F83 These M3/M4
models use lithium-ion for performance; always check MSDS for handling.
5 When using a floor jack to lift a vehicle, the technician is permitted to lift
the rear axle from the diff cover. True or False? False Lifting from the diff can
damage seals; use designated lift points only.
6 Regarding emergency release of park to neutral on a 2015 BMW automatic
transmission: Where is the procedure located? ISTA Service Functions
Access via ISTA under "Transmission" > "Emergency Release"; requires tool 83
14 0 000 001.
7 New Vehicle Prep can be found under the main group in TIS:
Maintenance and General Info This tab includes prep checklists for delivery
inspections.
, 8 BMW special tool 83 30 0 492 467 can be used during an inspection to
measure: Brake pad thickness and tire tread depth It's a digital gauge for
QC1; also checks air pressure indirectly.
9 Tech A states that during a QC1 on a G05 X5, it is necessary to press the
'AUTO' button in the light switch cluster. Tech B states current BMW
instrument clusters are unlocked by using sum of the last 5 digits of the VIN.
Who is correct? Both A and B 'AUTO' activates lights for inspection; VIN
unlock is for diagnostics.
10 Tech A states that MSDS has descriptions of first aid measures. Tech B
states that MSDS has descriptions on proper lifting techniques. Who is
correct? A only MSDS covers hazards/first aid; lifting is in separate BMW
safety guides.
11 Transport Mode Switching Device can be used to successfully perform a
QC1 inspection. True or False? False QC1 requires full vehicle activation;
transport mode disables features.
12 Tech A states that on 2019 QC1, DOT numbers from each tire's sidewall do
not need to be recorded for factory-fitted tires. Tech B states that if a BMW-
approved accessory wheel set is installed, the DOT numbers must be
recorded. Who is correct? B only Factory tires are pre-logged; accessories
require manual entry on QC1 sheet.
13 The warranty procedure and policy manual can be found in CenterNet.
Tech A says use multi-search in the menu tab. Tech B says use the Service
Information tab in TIS. Who is correct? Both A and B Multi-search scans all;
Service Info tab is direct path.
14 BMW recommends replacing tires at least every 6 years. What resource
confirms this? TIS Tire Maintenance Section Search "Tire Age" in TIS; DOT
code indicates manufacture date.
15 A technician should consider which questions for quality control after
service? All of the above (address concerns, top off fluids/set tire pressure,
reset service lights) QC process ensures completeness per BMW standards.
Questions and Answers (Updated for 2025/2026)
1 A lifting pad must be in place to lift a BMW vehicle. True or False? True
BMW requires lifting pads on all models to prevent frame damage; using the
diff cover or axle is prohibited.
2 Under which section in TIS is the User Manual for the DEUTRONIC
battery charger located? Tools and Equipment TIS organizes manuals by
category; search "DEUTRONIC" under this tab for charging procedures.
3 Regarding BMW instrument cluster test function: Tech A states the cluster
can be unlocked, and a test function can be used to display fuel level reading
in liters. Tech B states current BMW instrument clusters are unlocked by
using sum of the last 5 digits of the VIN. Who is correct? Both A and B
Unlocking via VIN sum (e.g., for F-series) and test mode for fuel (in liters) are
standard diagnostics.
4 Which BMW vehicles use Li-Ion batteries? F80 / F82 / F83 These M3/M4
models use lithium-ion for performance; always check MSDS for handling.
5 When using a floor jack to lift a vehicle, the technician is permitted to lift
the rear axle from the diff cover. True or False? False Lifting from the diff can
damage seals; use designated lift points only.
6 Regarding emergency release of park to neutral on a 2015 BMW automatic
transmission: Where is the procedure located? ISTA Service Functions
Access via ISTA under "Transmission" > "Emergency Release"; requires tool 83
14 0 000 001.
7 New Vehicle Prep can be found under the main group in TIS:
Maintenance and General Info This tab includes prep checklists for delivery
inspections.
, 8 BMW special tool 83 30 0 492 467 can be used during an inspection to
measure: Brake pad thickness and tire tread depth It's a digital gauge for
QC1; also checks air pressure indirectly.
9 Tech A states that during a QC1 on a G05 X5, it is necessary to press the
'AUTO' button in the light switch cluster. Tech B states current BMW
instrument clusters are unlocked by using sum of the last 5 digits of the VIN.
Who is correct? Both A and B 'AUTO' activates lights for inspection; VIN
unlock is for diagnostics.
10 Tech A states that MSDS has descriptions of first aid measures. Tech B
states that MSDS has descriptions on proper lifting techniques. Who is
correct? A only MSDS covers hazards/first aid; lifting is in separate BMW
safety guides.
11 Transport Mode Switching Device can be used to successfully perform a
QC1 inspection. True or False? False QC1 requires full vehicle activation;
transport mode disables features.
12 Tech A states that on 2019 QC1, DOT numbers from each tire's sidewall do
not need to be recorded for factory-fitted tires. Tech B states that if a BMW-
approved accessory wheel set is installed, the DOT numbers must be
recorded. Who is correct? B only Factory tires are pre-logged; accessories
require manual entry on QC1 sheet.
13 The warranty procedure and policy manual can be found in CenterNet.
Tech A says use multi-search in the menu tab. Tech B says use the Service
Information tab in TIS. Who is correct? Both A and B Multi-search scans all;
Service Info tab is direct path.
14 BMW recommends replacing tires at least every 6 years. What resource
confirms this? TIS Tire Maintenance Section Search "Tire Age" in TIS; DOT
code indicates manufacture date.
15 A technician should consider which questions for quality control after
service? All of the above (address concerns, top off fluids/set tire pressure,
reset service lights) QC process ensures completeness per BMW standards.
