• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 3 out of 20 pages
Exam (elaborations)

Illinois Home Inspector exam Exam Questions and Answers 100% Pass |Verified and Updated

Document preview thumbnail
Preview 3 out of 20 pages

Illinois Home Inspector exam Exam Questions and Answers 100% Pass |Verified and Updated

Content preview

Illinois Home Inspector exam
Study online at https://quizlet.com/_hph849

1. Which of the following is a real company legal structure?: limited liability company (LLC)
2. A sole proprietor:: has no separation of liability if a claim is filed against you
3. A typical general liability insurance policy provides:: $1 to 2 million in coverage
4. Which of these additional services is licensed in most (or all) states?: termites
5. The pre-inspection agreement (inspection contract):: should be signed by the client
before the inspection begins
6. Things you need to market your business:: business cards, brochures, email and a decent
website
7. To promote your business, you should spend:: 3-7% of your gross fees
8. You should consider doing a mailing to all past clients:: a couple of times a year
9. Which of these marketing methods is not effective for home inspectors?: yellow
pages ads
10. Which of the following is not a common method of establishing an inspection
fee?: overall condition of the house
11. Licensing curriculums teach:: technical competency
12. Home inspectors offer expert opinions that are:: not legally binding
13. The oldest and most recognized Standards of Practice are from:: ASHI
14. The ASHI definition of "installed":: Attached such that removal requires tools
15. The ASHI Standards of Practice are applicable to buildings:: with four or fewer
dwelling units and their garages or carports
16. Which of the following tools is not required to meet the Standards of Prac-
tice?: a gas leak detector
17. Every good home inspector is a:: good communicator
18. Never start an oven or dishwasher:: without checking the interior first
19. If any rooms or areas are blocked by stored items:: be sure to note this on the report as
"restricted view"
20. Dormers are:: "bump outs" in the roof to gain space
21. Traditional underlayment has been:: 15 or 30 pound felt
22. A cricket is required on the high side of any chimney wider than:: 30 inches
23. The top edge of counter flashing is either covered by siding or inserted
into:: reglets
24. Which of the following is not a valley type?: stacked


, Illinois Home Inspector exam
Study online at https://quizlet.com/_hph849

25. The most common roofing material in North America is:: asphalt
26. A valley style unique to slate:: gravel, flood coat, seal coat
27. A flat roof is equal to/less than:: 2:12 slope
28. If you see broken chimney tiles:: recommend a masonry contractor
29. The home inspector's job does not include:: providing an opinion on value
30. A typical home inspection:: takes two to three hours
31. A home inspection usually includes:: electrical, plumbing and insulation
32. The home inspector's job is finished:: after the report is delivered
33. Most inspectors provide a report:: within 24 to 48 hours
34. Inspection reports do not usually include:: a plat of survey
35. Standards of Practice: allow the client to know what to expect
36. With "dead end" valleys you should:: check the attic or ceilings below for leaks or stains
37. Failed rubber at plumbing vents:: is common
38. Turbine vents:: are often rusted and "locked up"
39. Black streaks on cedar shingles from galvanized nails:: are only a cosmetic issue
40. Short chimneys:: can cause down-drafting into the house
41. Chimneys have an exterior:: chase
42. The top of the chimney is known as the:: crown
43. All chimneys must be at least 3 feet above the roof and:: 2 feet taller than anything
within 10 feet
44. All gas vents must be a minimum of 12 inches above a roof and a minimum
of:: 2 feet taller than anything within 8 feet
45. Downspouts should be extended away from the house:: a minimum of 5 feet
46. As per the ASHI Standards of Practice, you are not required to inspect:: fences
47. A sign of a problematic crack may be:: widening from the point of origin
48. The dominant siding material in the United States is:: vinyl
49. "Seamless" vinyl siding:: is really 40 feet long
50. The EPA Renovation, Repair and Painting Rule applies to homes built before:-
: 1978
51. Engineered wood siding is also known as:: composite wood
52. T1-11 is a style of:: plywood siding
53. Older fiber cement siding (pre-1970's) contains:: asbestos


, Illinois Home Inspector exam
Study online at https://quizlet.com/_hph849

54. Traditional stucco siding:: is applied in two or three coats
55. EIFS (Exterior Insulation and Finish System):: dents and cracks easily, allowing moisture
infiltration
56. White deposits on concrete and masonry, caused by chronic moisture, are
known as:: efflorescence
57. Lintel bearing on masonry should be:: 6 inches
58. Thin bricks are also sometimes called:: faux brick
59. Manufactured stone:: is made with concrete, real stone chips and colorants
60. A flashing type commonly used with siding to protect a trim board:: "Z" flashing
61. Keyed deadbolts on exterior doors:: are a safety hazard in an emergency
62. Perimeter railings on decks should be:: at least 36 inches high
63. Maximum opening through any part of a perimeter railing is:: 4 inches
64. All vegetation:: should be trimmed at least 12 inches away from the house
65. You are not required to inspect:: shutters
66. Trusses:: cannot be field modified unless directed by a structural engineer
67. The maximum notch typically allowed in a solid wood joist is:: 1/6 joist depth
68. The thickness of an I-joist web is:: 3/8 inch
69. The top and bottom flanges of an I-joist:: can never be cut, notched or modified
70. The maximum notch typically allowed in a beam:: should never be cut or notched
anywhere
71. A short column is known as a:: pier
72. "Checking" in old columns:: is common and is usually acceptable
73. Defects with engineered products such as trusses or I-joists should be re-
ferred to:: a licensed structural engineer
74. Defects with dimensional lumber should be referred to:: a qualified framing contractor
(carpenter)
75. Epoxy grouting:: stops seepage
76. Deck failures:: are fairly common
77. Deck ledger boards should always be:: bolted
78. Deck defects should always be referred to:: a qualified framing contractor (carpenter)
79. Wall cracking from seasonal changes is usually:: straight and vertical
80. What is not common for older homes to have?: I-joists

Document information

Uploaded on
October 13, 2025
Number of pages
20
Written in
2025/2026
Type
Exam (elaborations)
Contains
Questions & answers
$12.99

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
SophiaBennett
3.6
(29)
Sold
159
Followers
5
Items
9084
Last sold
1 day ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions