NACE CIP L1 Exam UPDATED ACTUAL Questions and CORRECT Answers
1. Type 1 DFT gauges standard SSPC PA 2 or ASTM D7091 or ISO 19840, 2808, 2178
2. White Metal Blast Standard NACE no. 1 / SSPC SP5
3. Near-white (5% staining) NACE no. 2 / SSPC SP10
4. Commercial (33% staining) NACE no. 3 / SSPC SP6
5. Industrial (10% staining) NACE no. 6 / SSPC SP14
6. Brush-off (mill scale allowed) NACE no. 4 / SSPC SP7
7. ISO 8501-1 surface prep Sa3 Visually clean steel
8. ISO 8501-1 surface prep Very thorough blast clean (slight stains)
Sa2.5
9. ISO 8501-1 surface prep Sa2 Thorough blast clean (residual contamination shall be firmly
adherent)
10. ISO 8501-1 surface prep Sa1 Light blast clean (poorly adherent mill scale)
11. ISO 8501-1 surface prep St2 Thorough hand and power tool cleaning (free from everything)
12. ISO 8501-1 surface prep St3 Very thorough hand and power tool cleaning
13. SSPC PA2 specifies that read- 5 spot readings, 3 gauge readings within 1.5in diameter
ings
14. NACE SP0178 is for... design/fabrication/surface finish
15. NACE SP0188 is for... holiday testing
16. ASTM D 4417 is for... surface profile blast cleaned steel
17. Move electrode at. ..................... 0.3m/s or 1ft/s
1. Type 1 DFT gauges standard SSPC PA 2 or ASTM D7091 or ISO 19840, 2808, 2178
2. White Metal Blast Standard NACE no. 1 / SSPC SP5
3. Near-white (5% staining) NACE no. 2 / SSPC SP10
4. Commercial (33% staining) NACE no. 3 / SSPC SP6
5. Industrial (10% staining) NACE no. 6 / SSPC SP14
6. Brush-off (mill scale allowed) NACE no. 4 / SSPC SP7
7. ISO 8501-1 surface prep Sa3 Visually clean steel
8. ISO 8501-1 surface prep Very thorough blast clean (slight stains)
Sa2.5
9. ISO 8501-1 surface prep Sa2 Thorough blast clean (residual contamination shall be firmly
adherent)
10. ISO 8501-1 surface prep Sa1 Light blast clean (poorly adherent mill scale)
11. ISO 8501-1 surface prep St2 Thorough hand and power tool cleaning (free from everything)
12. ISO 8501-1 surface prep St3 Very thorough hand and power tool cleaning
13. SSPC PA2 specifies that read- 5 spot readings, 3 gauge readings within 1.5in diameter
ings
14. NACE SP0178 is for... design/fabrication/surface finish
15. NACE SP0188 is for... holiday testing
16. ASTM D 4417 is for... surface profile blast cleaned steel
17. Move electrode at. ..................... 0.3m/s or 1ft/s