NFPA 10 Study Guide Exam Questions and
Answers 100% Pass |Verified and Updated 2025
Save
Terms in this set (46)
Ordinary Materials such as wood, cloth, paper,
Class A Fires are what?
rubber, and many plastics
Flammable liquids, combustible liquids, combustible
Class B Fire are what? liquids, petroleum greases, tars, oils, oil based paints,
solvents, laquers, alcohols and flammable gases
Class C Fires are what? Electrical Fires
Combustible Metals such as Magnesium, Zirconium,
Class D Fires are what?
Titanium
Fires in cooking appliances that involve combustible
Class K Fires are what?
cooking media (Vegetable or animal oils and fats)
Fire Extinguishers -40℉, by the use of Antifreeze
containing only plain
water shall be protected
at temperatures as low as
what?
What Shall not be used in Calcium Chloride
stainless steel
extinguishers?
, Fire Extinguishers shall be less that 75ft
located so that the
maximum distance of
travel is what?
Month and year maintenance was performed
Tag or label, as a minimum
Person performing work
shall identify what?
Name of Agency performing work
Internal Examination of 6 Years
dry chem with brazed
brass shells, halogenated
agents, and dry powder
stored_pressure with steel
shells shall occur when?
Which extinguishers are Class A & B extinguishers
required to have a rating
number preceding the
classification letter?
Which extinguishers do Classes C, D and K
not require a number
before the classification
letter?
High hazard areas are present and limited personnel:
Wheeled fire extinguishers
requiring:
can be considered for
High flow rate
hazard protection for what
Increased stream range
reasons?
Increased capacity
a High-Pressure Cylinder Higher than 500 psi
is held to what pressure?
A Low-Pressure cylinder is 500 psi or less at 70℉
held to what pressure?
Quantity and combustibility of class A & B are low and
a Light Hazard is what?
Quantity of Class b is less that 1 gallon
Answers 100% Pass |Verified and Updated 2025
Save
Terms in this set (46)
Ordinary Materials such as wood, cloth, paper,
Class A Fires are what?
rubber, and many plastics
Flammable liquids, combustible liquids, combustible
Class B Fire are what? liquids, petroleum greases, tars, oils, oil based paints,
solvents, laquers, alcohols and flammable gases
Class C Fires are what? Electrical Fires
Combustible Metals such as Magnesium, Zirconium,
Class D Fires are what?
Titanium
Fires in cooking appliances that involve combustible
Class K Fires are what?
cooking media (Vegetable or animal oils and fats)
Fire Extinguishers -40℉, by the use of Antifreeze
containing only plain
water shall be protected
at temperatures as low as
what?
What Shall not be used in Calcium Chloride
stainless steel
extinguishers?
, Fire Extinguishers shall be less that 75ft
located so that the
maximum distance of
travel is what?
Month and year maintenance was performed
Tag or label, as a minimum
Person performing work
shall identify what?
Name of Agency performing work
Internal Examination of 6 Years
dry chem with brazed
brass shells, halogenated
agents, and dry powder
stored_pressure with steel
shells shall occur when?
Which extinguishers are Class A & B extinguishers
required to have a rating
number preceding the
classification letter?
Which extinguishers do Classes C, D and K
not require a number
before the classification
letter?
High hazard areas are present and limited personnel:
Wheeled fire extinguishers
requiring:
can be considered for
High flow rate
hazard protection for what
Increased stream range
reasons?
Increased capacity
a High-Pressure Cylinder Higher than 500 psi
is held to what pressure?
A Low-Pressure cylinder is 500 psi or less at 70℉
held to what pressure?
Quantity and combustibility of class A & B are low and
a Light Hazard is what?
Quantity of Class b is less that 1 gallon
