Georgia Water Distribution Study Guide Exam Questions and
Answers 100% Pass |Verified and Updated
1. Who enforces the drinking water regulations in Georgia?: Georgia EPD
2. What type of sample is required for bacterial analysis?: Flushed
3. What type of sample is required for lead and copper?: First Draw
4. Water must sit in the customer's plumbing lines motionless for at least 6
hours, but no longer than 12 hour for which of the following samples?: Lead &
Copper
5. Care must be taken when handling bacteria sample bottles during the sam-
pling process due to the fact that they are:: Sterile
6. What water quality problem is most likely to occur dead-end water mains?: -
Dirty Water and or Taste & Odor
7. Examples of three waterborne diseases are:: Typhoid fever, Infectious hepatitis, Cholera
8. When should a new water main be flushed and disinfected before placing in
service?: Every Time
9. The standard purity of HTH is: 65%
10. Sodium hypochlorite is also known as: Bleach
11. The chemical used to detect chlorine residuals in water is: DPD
mailto:https://www.stuvia.com/user/DREAMS
, 12. A venturi tube increases the velocity and decreases the pressure as water
flows through the unit. This type of tube is used to:: Measure the rate of water flowing
through it
13. Which one of the following types of meters has no moving parts:: Venturi
14. Which tap is a connection made into a main that is full of water or under
pressure?: Wet Tap
15. A valve that joins a customer's service to the water main called:: Corporation Stop
16. The following meter is used where the water demand varies considerably:: -
Compound
17. Which if the following factors determine the type of corporation stop that
should be used?: Size and material of main being tapped, Service line material, Type of connection to service
line
18. Which of the following is an advantage of wet taps?: No interruption in service, Made
without shutting ott the water, Less chance of contamination
19. The most commonly known corporation stop thread is called:: Mueller Threads
20. Ab example of a large-flow water main is: Velocity Meter
mailto:https://www.stuvia.com/user/DREAMS
Answers 100% Pass |Verified and Updated
1. Who enforces the drinking water regulations in Georgia?: Georgia EPD
2. What type of sample is required for bacterial analysis?: Flushed
3. What type of sample is required for lead and copper?: First Draw
4. Water must sit in the customer's plumbing lines motionless for at least 6
hours, but no longer than 12 hour for which of the following samples?: Lead &
Copper
5. Care must be taken when handling bacteria sample bottles during the sam-
pling process due to the fact that they are:: Sterile
6. What water quality problem is most likely to occur dead-end water mains?: -
Dirty Water and or Taste & Odor
7. Examples of three waterborne diseases are:: Typhoid fever, Infectious hepatitis, Cholera
8. When should a new water main be flushed and disinfected before placing in
service?: Every Time
9. The standard purity of HTH is: 65%
10. Sodium hypochlorite is also known as: Bleach
11. The chemical used to detect chlorine residuals in water is: DPD
mailto:https://www.stuvia.com/user/DREAMS
, 12. A venturi tube increases the velocity and decreases the pressure as water
flows through the unit. This type of tube is used to:: Measure the rate of water flowing
through it
13. Which one of the following types of meters has no moving parts:: Venturi
14. Which tap is a connection made into a main that is full of water or under
pressure?: Wet Tap
15. A valve that joins a customer's service to the water main called:: Corporation Stop
16. The following meter is used where the water demand varies considerably:: -
Compound
17. Which if the following factors determine the type of corporation stop that
should be used?: Size and material of main being tapped, Service line material, Type of connection to service
line
18. Which of the following is an advantage of wet taps?: No interruption in service, Made
without shutting ott the water, Less chance of contamination
19. The most commonly known corporation stop thread is called:: Mueller Threads
20. Ab example of a large-flow water main is: Velocity Meter
mailto:https://www.stuvia.com/user/DREAMS
