CDC 3E551 ENGINEERING JOURNEYMAN - VOLUME 3.
DRAFTING AND DESIGN COMPREHENSIVE EXAM
QUESTIONS WITH DETAILED VERIFIED AND 100%
ACCURATE ANSWERS BRAND NEW EXAM ALREADY
GRADED A+ PASS
(401) By what name do we refer to the space between any points A and
B?
1. a. Angle.
b. Point line.
c. Line segment.
d. Perpendicular line. Ans✓✓✓ c. Line Segment
2. (401) The ratio of the size of drawn objects compared to their actual
counterparts is called
a. scale.
b. size ratio.
c. representation.
d. engineering comparison. Ans✓✓✓ a. scale
3. (402) A basic orthographic projection shows an object from how
many different views?
a. Two.
b. Four.
c. Eight.
d. Twelve. Ans✓✓✓ b. Four
,4. (402) What name do we give to a roofless cutaway of a build from a
bird's eye view?
a. Detail.
b. Sketch.
c. Elevation.
d. Floor plan. Ans✓✓✓ d. Floor Plan
5. (403) What is the web address for the computer-aided drafting-
building information modeling (CAD-BIM) library?
a. Https://usace.army.mil.
b. Https://cadbim.army.mil.
c. Https:// cadbimcenter.erdc.dren.mil.
d. Https://usace.army.mil/cadbim/library. Ans✓✓✓ c.
Https://cadbimcenter.erdc.dren.mil
6. (404) Which technical drawing set contains a general layout of the
construction project?
a. Civil.
b. Electrical.
c. Structural.
d. Mechanical. Ans✓✓✓ a. Civil
, 7. (404) Which engineering discipline is concerned with the circulation
of liquids or gases, such as water or air?
a. Civil.
b. Electrical.
c. Structural.
d. Mechanical. Ans✓✓✓ d. Mechanical
8. (405) In the model file naming convention, what comes last just
before the file extension?
a. Model file type.
b. Sheet sequence number.
c. 1-20 character project code.
d. Discipline designator model file type. Ans✓✓✓ b. Sheet sequence
number.
9. (405) Which of these is NOT found in the project code portion of the
model file naming convention?
a. Base specific designator.
b. Initials of project draftsperson.
c. Fiscal year project was developed.
d. Sequence number of projects developed at same time. Ans✓✓✓ b.
Initials of project draftperson.
DRAFTING AND DESIGN COMPREHENSIVE EXAM
QUESTIONS WITH DETAILED VERIFIED AND 100%
ACCURATE ANSWERS BRAND NEW EXAM ALREADY
GRADED A+ PASS
(401) By what name do we refer to the space between any points A and
B?
1. a. Angle.
b. Point line.
c. Line segment.
d. Perpendicular line. Ans✓✓✓ c. Line Segment
2. (401) The ratio of the size of drawn objects compared to their actual
counterparts is called
a. scale.
b. size ratio.
c. representation.
d. engineering comparison. Ans✓✓✓ a. scale
3. (402) A basic orthographic projection shows an object from how
many different views?
a. Two.
b. Four.
c. Eight.
d. Twelve. Ans✓✓✓ b. Four
,4. (402) What name do we give to a roofless cutaway of a build from a
bird's eye view?
a. Detail.
b. Sketch.
c. Elevation.
d. Floor plan. Ans✓✓✓ d. Floor Plan
5. (403) What is the web address for the computer-aided drafting-
building information modeling (CAD-BIM) library?
a. Https://usace.army.mil.
b. Https://cadbim.army.mil.
c. Https:// cadbimcenter.erdc.dren.mil.
d. Https://usace.army.mil/cadbim/library. Ans✓✓✓ c.
Https://cadbimcenter.erdc.dren.mil
6. (404) Which technical drawing set contains a general layout of the
construction project?
a. Civil.
b. Electrical.
c. Structural.
d. Mechanical. Ans✓✓✓ a. Civil
, 7. (404) Which engineering discipline is concerned with the circulation
of liquids or gases, such as water or air?
a. Civil.
b. Electrical.
c. Structural.
d. Mechanical. Ans✓✓✓ d. Mechanical
8. (405) In the model file naming convention, what comes last just
before the file extension?
a. Model file type.
b. Sheet sequence number.
c. 1-20 character project code.
d. Discipline designator model file type. Ans✓✓✓ b. Sheet sequence
number.
9. (405) Which of these is NOT found in the project code portion of the
model file naming convention?
a. Base specific designator.
b. Initials of project draftsperson.
c. Fiscal year project was developed.
d. Sequence number of projects developed at same time. Ans✓✓✓ b.
Initials of project draftperson.
