Watchguard Network Security Essentials Practice Exam Questions And Answers Latest Updated (Graded A+)

WATCHGUARD NETWORK SECURITY ESSENTIALS PRACTICE EXAM QUESTIONS AND ANSWERS LATEST UPDATED (GRADED A+) What is the URL of the Firebox Authentication web page? (Select one.) A. B. https://trusted or optional device interface IP address:4100/ C. http://ip address of device interface:411/ D. https://gateway IP address of Firebox:4000/ - ANSWER What is the URL of the Firebox Authentication web page? B. https://trusted or optional device interface IP address:4100/ What are the four types of network interfaces you can configure on your firewall? A. External, Trusted, Optional, Custom B. External, Optional, Trusted, Optional C. Trusted, Primary, Optional, DHCP D. Optional, Trusted, Custom, Internet - ANSWER What are the four types of network interfaces you can configure on your firewall? B. External, Trusted, Optional, Custom 1. Deny Stops the message without a reply 2. Quarantine option: Isolates the message on a Quarantine Server 3. Allow Option: allow messages to reach the Firebox without tags 4. Ignore Sends the message to SpamBlocker for processing 5. Drop Option: It drops the connection immediately and does not send error messages to the sender. 6. Tag Add a "spam" tag to the email title and allow messages to reach the recipient - ANSWER 1. Deny Stops the message without a reply 2. Quarantine option: Isolates the message on a Quarantine Server 3. Allow Option: allow messages to reach the Firebox without tags 5. Drop Option: It drops the connection immediately and does not send error messages to the sender. 6. Tag Add a "spam" tag to the email title and allow messages to reach the recipient True False? The Firebox can only send log messages to one WatchGuard Log Server at a time. False - ANSWER False True or false? If you want to report on the use of applications that are not blocked, you must enable logging of allowed packages in each policy that has Application Control enabled. True False - ANSWER True True or False: In order to enable NAT Loopback on your firewall, you have to configure this under the Dynamic NAT settings. True - ANSWER False. NAT Loopback does not require anything to be enabled. You simple have to write a policy to allow it. Choose the actions that SpamBlocker can take when configuring SpamBlocker with an SMTP proxy. (Select five.) False True When setting up an IPSec Mobile VPN, what must you make sure to configure?(2) IPSec Tunnel Allowed Resources IPSec Gateway Virtual IP Address Pool - ANSWER IPSec Tunnel Virtual IP Address Pool When setting up a Firecluster, what requirements must you follow? Select all that apply. Each device must have a special FireCluster subscription. Each device must be running the same firmware. Each device must be the same model. Each device must be activated on the WatchGuard website. - ANSWER Each device must be running the same firmware. Each device must be the same model. Each device must be activated on the WatchGuard website. What is the default port of the Web UI? (Select one.) 8100 8080 8000 8088 - ANSWER 8080 True or False: When setting up a static route, a lower metric means a lower precedence. True False - ANSWER False. A lower metric indicates a higher precedence in the routing table. True or false? Dynamic NAT rewrites the IP source addresses of the packets to use the IP addresses of the outgoing interface. False - ANSWER True True or False: Policy precedence is most often determined by the alphabetical order of policy names. True - ANSWER False. Policy precedence is determined by how specific the policy is in regards to what traffic is allowed. True False Which of these log message settings are available in the policy manager? (Select two) Reports by schedules Configure an encryption key for the logs Configure the mail server and email addresses for email notifications Configure e-mail notification for denied SMTP packets Select a backup log server for log messages Configure the maximum size of the log database file - ANSWER Configure email notification for denied SMTP packets Select a backup log server for log messages What is the purpose of the cluster interface? To allow remote access to the Firecluster. To allow the cluster members to communicate with each other. To log Firecluster events. To manage the Firecluster. - ANSWER To allow the cluster members to communicate with each other. True or False: There are three modes you can operate your firewall under: Mixed Routing, Bridged and Drop-In. Bridged mode is the default selection. False True - ANSWER False. Mixed Routing mode is the default mode. True or false? You can save a PCAP file and open it later in Traffic Monitor. False - ANSWER False When you enable Mobile VPN with IPSec for the VPNusers group, what policies are automatically created? (Select one.) A single Mobile VPN policy with IPSec: VPN-users-Any. Two firewall policies: Allow-IPSec-Users and WatchGuard IPSec. A single firewall policy: Allow-VPN Two firewall policies: Allow-VPN-users and WatchGuard IPSec. A single Mobile VPN policy with IPSec: Allow-VPN-users. - ANSWER A single Mobile VPN policy with IPSec: VPN-users-any Which Multi-WAN method allows you to set weights on the interfaces? Round-Robin Interface Overflow Failover Routing Table - ANSWER Round-Robin