10/1/25, 9:19 AM NICET LEVEL II STUDY SET 1 <span style="color:#000;font-weight:bold;">130+</span> (2025-2026 A+ Graded) Exam-Style Ques…
NICET LEVEL II STUDY SET 1 QUESTIONS
AND ANSWERS
Question 1
Which of the following best describes proper use of a step ladder?
Correct Answer
Do not step above the position with the warning "do not step above this point"
Question 2
Which of the following tests is required by NFPA 72 for duct type smoke detectors?
(Select Three)
Correct Answer
Ensure that they will properly sample the airstream
Question 3
A supervising station fire alarm system which serves contiguous or noncontiguous
property under one ownership is considered _____?
Correct Answer
Proprietary
Question 4
NFPA 72 requires that emergency control function interface devices shall be located
within _____ feet of the component controlling the emergency control function?
Correct Answer
3
Page 1 of 30
1/30
,10/1/25, 9:19 AM NICET LEVEL II STUDY SET 1 <span style="color:#000;font-weight:bold;">130+</span> (2025-2026 A+ Graded) Exam-Style Ques…
Question 5
Consider the use of heat detectors with a listed spacing of 15 feet installed on a
smooth and level ceiling 12 feet AFF. Based on this, adjusted spacing is _____ feet?
Correct Answer
13
Question 6
What type of cabling is acceptable for runs between floors shall be of what type?
(Select Two)
Correct Answer
FPL, FLPR
Question 7
When installing heat detectors on a shed ceiling, a row of detectors shall be located
within _____ feet of the high side of the ceiling measured horizontally?
Correct Answer
3
Question 8
Consider the use of an air sampling type smoke detector. The transport time from a
sampling port to the detector is rated at 2 feet per second. Based on this, the farthest
point for a sampling port is _____ feet?
Correct Answer
240
Question 9
Consider a fire alarm installation where the audible notification appliances produce a
sound level of 87 dB at 10 feet. Based on this, the sound level of these audible
notification appliance is _____ dB at 20 feet?
Correct Answer
81
Page 2 of 30
2/30
, 10/1/25, 9:19 AM NICET LEVEL II STUDY SET 1 <span style="color:#000;font-weight:bold;">130+</span> (2025-2026 A+ Graded) Exam-Style Ques…
Question 10
What is the testing frequency for alarm verification procedures?
Correct Answer
Annually
Question 11
The system used to provide information and instructions to people in the building or
other space using intelligible voice communications and including visible signals,
graphics, tactile or other communications methods is defined as a _____?
Correct Answer
In building mass notification system
Question 12
Consider the sensitivity testing of smoke detectors in other than one and two family
dwellings. The smoke detectors are not marked with their sensitivity range. In this
case, a sensitivity range of _____ percent obscuration light gray smoke?
Correct Answer
4
Question 13
Consider a series circuit where voltage equals 12 VDC, and current equals 3 Amps.
The total resistance = _____ ohms? R (ohm) V (volts) I (current/amps). Ohms = V/I
Correct Answer
4
Question 14
Consider a Use Group B occupancy. A manual fire alarm system is required when the
building has an occupant load of _____ or more?
Correct Answer
500
Page 3 of 30
3/30
NICET LEVEL II STUDY SET 1 QUESTIONS
AND ANSWERS
Question 1
Which of the following best describes proper use of a step ladder?
Correct Answer
Do not step above the position with the warning "do not step above this point"
Question 2
Which of the following tests is required by NFPA 72 for duct type smoke detectors?
(Select Three)
Correct Answer
Ensure that they will properly sample the airstream
Question 3
A supervising station fire alarm system which serves contiguous or noncontiguous
property under one ownership is considered _____?
Correct Answer
Proprietary
Question 4
NFPA 72 requires that emergency control function interface devices shall be located
within _____ feet of the component controlling the emergency control function?
Correct Answer
3
Page 1 of 30
1/30
,10/1/25, 9:19 AM NICET LEVEL II STUDY SET 1 <span style="color:#000;font-weight:bold;">130+</span> (2025-2026 A+ Graded) Exam-Style Ques…
Question 5
Consider the use of heat detectors with a listed spacing of 15 feet installed on a
smooth and level ceiling 12 feet AFF. Based on this, adjusted spacing is _____ feet?
Correct Answer
13
Question 6
What type of cabling is acceptable for runs between floors shall be of what type?
(Select Two)
Correct Answer
FPL, FLPR
Question 7
When installing heat detectors on a shed ceiling, a row of detectors shall be located
within _____ feet of the high side of the ceiling measured horizontally?
Correct Answer
3
Question 8
Consider the use of an air sampling type smoke detector. The transport time from a
sampling port to the detector is rated at 2 feet per second. Based on this, the farthest
point for a sampling port is _____ feet?
Correct Answer
240
Question 9
Consider a fire alarm installation where the audible notification appliances produce a
sound level of 87 dB at 10 feet. Based on this, the sound level of these audible
notification appliance is _____ dB at 20 feet?
Correct Answer
81
Page 2 of 30
2/30
, 10/1/25, 9:19 AM NICET LEVEL II STUDY SET 1 <span style="color:#000;font-weight:bold;">130+</span> (2025-2026 A+ Graded) Exam-Style Ques…
Question 10
What is the testing frequency for alarm verification procedures?
Correct Answer
Annually
Question 11
The system used to provide information and instructions to people in the building or
other space using intelligible voice communications and including visible signals,
graphics, tactile or other communications methods is defined as a _____?
Correct Answer
In building mass notification system
Question 12
Consider the sensitivity testing of smoke detectors in other than one and two family
dwellings. The smoke detectors are not marked with their sensitivity range. In this
case, a sensitivity range of _____ percent obscuration light gray smoke?
Correct Answer
4
Question 13
Consider a series circuit where voltage equals 12 VDC, and current equals 3 Amps.
The total resistance = _____ ohms? R (ohm) V (volts) I (current/amps). Ohms = V/I
Correct Answer
4
Question 14
Consider a Use Group B occupancy. A manual fire alarm system is required when the
building has an occupant load of _____ or more?
Correct Answer
500
Page 3 of 30
3/30