CSX Freight Conductor Final Exam UPDATED ACTUAL Questions and CORRECT
Answers
3) Lever is latched
What hand signal is raised and lowered vertically?
What form is required to move a key train to show the
hazmat position in a track?
True or False: When handling one or more clearance
implicated shipments in a train, do not enter a yard or ter-
minal where a yardmaster is on-duty until the yardmaster
is informed of the shipment.
What instructions are required to handle and move a
clearance implicated shipment?
Your train is traveling at a speed of 42 miles per hour with
a speed limit of 40 mph. This means you are speeding by
2 mph. what do you do?
Your train is traveling at a speed of 47 MPH with a speed
limit of 40. This means you are speeding by 7 MPH. what
do you do?
Your equipment must not foul a track until it can be visually
determined that: 2 Answers
The yardmaster tasked you with putting cars from track
11 into track 4. Track 4 does not have a clearance marker
clearly visible. How would you find the clearance point? 2
Answers
Multiple Part True or False:
After operating a switch or derail the employee must make
certain the
1) Device has a reflective handle
2) Device is lined opposite movement
, 3) True
Procee
4) True
dCT-
168
True
Clearance Bureau Instructions
Tell the locomotive operator to slow
down
Tell the locomotive operator to stop
1) The intended route is clear
2) Switches and derails connected with the movement
areproperly lined
1) Standing outside the rail and off the end of
crosstieextend arm toward the equipment
2) Identify the location equipment can no longer be
touched and position equipment an additional 50 ft
intotrack from location identified
1) False
2) False
, 4) If equipped, device is locked before being left unat-
tended
When shoving equipment you must stop 150 ft before 1) A Fixed Derail
what? Select All That Apply 2) An improperly lined switch
You are operating on the q79510 at max speed in CP
territory and you experience an air brake emergency what Operate the Train not to exceed 20 MPH for 1 train length
is required when permitted to proceed?
Protected by qualified employee on the leading end of the
You have been switching and doubled your train, how do
track, on the ground ahead of the movement and clear of
you protect the movement when shoving?
all tracks
Who is responsible for protecting a shove move? Qualified Employee
After coupling cars to your locomotive what is your next
Stretch the slack
step?
When shoving or pushing where must the train be pro-
From the leading end visually
tected
What speed must not be exceeded when not moving to or
10 MPH
from a main track operating a hand operated switch
Unless otherwise specified, authorized train speeds: Apply to entire train
Which of the following statements is true about authorized
Must Not Be Exceeded
train speeds?
You are leaving the main track, utilizing a hand operated
15 MPH
switch, into a non signaled siding what is your max speed?
You are using a non signaled siding what is the speed you Must be able to stop in 1/2 the range of vision not exceed-
must follow ing 25 MPH
When there is a conflict of your authorized speed what
The Lowest
speed are you governed by?
Answers
3) Lever is latched
What hand signal is raised and lowered vertically?
What form is required to move a key train to show the
hazmat position in a track?
True or False: When handling one or more clearance
implicated shipments in a train, do not enter a yard or ter-
minal where a yardmaster is on-duty until the yardmaster
is informed of the shipment.
What instructions are required to handle and move a
clearance implicated shipment?
Your train is traveling at a speed of 42 miles per hour with
a speed limit of 40 mph. This means you are speeding by
2 mph. what do you do?
Your train is traveling at a speed of 47 MPH with a speed
limit of 40. This means you are speeding by 7 MPH. what
do you do?
Your equipment must not foul a track until it can be visually
determined that: 2 Answers
The yardmaster tasked you with putting cars from track
11 into track 4. Track 4 does not have a clearance marker
clearly visible. How would you find the clearance point? 2
Answers
Multiple Part True or False:
After operating a switch or derail the employee must make
certain the
1) Device has a reflective handle
2) Device is lined opposite movement
, 3) True
Procee
4) True
dCT-
168
True
Clearance Bureau Instructions
Tell the locomotive operator to slow
down
Tell the locomotive operator to stop
1) The intended route is clear
2) Switches and derails connected with the movement
areproperly lined
1) Standing outside the rail and off the end of
crosstieextend arm toward the equipment
2) Identify the location equipment can no longer be
touched and position equipment an additional 50 ft
intotrack from location identified
1) False
2) False
, 4) If equipped, device is locked before being left unat-
tended
When shoving equipment you must stop 150 ft before 1) A Fixed Derail
what? Select All That Apply 2) An improperly lined switch
You are operating on the q79510 at max speed in CP
territory and you experience an air brake emergency what Operate the Train not to exceed 20 MPH for 1 train length
is required when permitted to proceed?
Protected by qualified employee on the leading end of the
You have been switching and doubled your train, how do
track, on the ground ahead of the movement and clear of
you protect the movement when shoving?
all tracks
Who is responsible for protecting a shove move? Qualified Employee
After coupling cars to your locomotive what is your next
Stretch the slack
step?
When shoving or pushing where must the train be pro-
From the leading end visually
tected
What speed must not be exceeded when not moving to or
10 MPH
from a main track operating a hand operated switch
Unless otherwise specified, authorized train speeds: Apply to entire train
Which of the following statements is true about authorized
Must Not Be Exceeded
train speeds?
You are leaving the main track, utilizing a hand operated
15 MPH
switch, into a non signaled siding what is your max speed?
You are using a non signaled siding what is the speed you Must be able to stop in 1/2 the range of vision not exceed-
must follow ing 25 MPH
When there is a conflict of your authorized speed what
The Lowest
speed are you governed by?
