Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Document preview thumbnail
Preview 3 out of 28 pages
Exam (elaborations)

Master Electrician 211 Exam Actual Exam Preparation Newest 2025/2026 Complete Questions And Correct Detailed Answers (Verified Answers) |Brand New Version!!

Document preview thumbnail
Preview 3 out of 28 pages

Master Electrician 211 Exam Actual Exam Preparation Newest 2025/2026 Complete Questions And Correct Detailed Answers (Verified Answers) |Brand New Version!!

Content preview

1|Page


Master Electrician 211 Exam Actual Exam Preparation
Newest 2025/2026 Complete Questions And Correct Detailed
Answers (Verified Answers) |Brand New Version!!




ARE CLASS 2 REMOTE - CONTROL cables permitted to be
STRAPPED or otherwise attached to RACEWAYS for support ?


A) No, this is prohibited


B) Yes, if the raceway is supported properly according to the NEC


C) Yes, if the raceway is not flexible but rigid, such as rigid metal
conduit, electrical metallic tubing, etc.


D) Yes, if the raceway contains power supply conductors for equipment
which the class 2 circuit conductors control - ANSWER-No, this is
prohibited


article 725.143


Where flexible cord is connected to the building ceiling with a suitable "
tension take - up device" the maximum length of the cord from the
supply joint to the take - up device is _____________ feet.

,2|Page




A) 2
B) 4
C) 6
D) 8 - ANSWER-6


article 368.56 (B) (2)


All of the following WIRING METHODS are permitted in a ceiling
space used as a return - air plenum except:


A) IMC
B) NMC
C) EMT
D) MI CABLE - ANSWER-NMC


article 300.22 (B)


Excluding exceptions, nonmetallic sheathed cable is permitted in all of
the following areas EXECPT: - ANSWER-Above a suspended ceiling of
a retail store


article 334.12 (A) (2)

, 3|Page




The NEC permits 3/8 - inch FLEXIBLE METAL CONDUIT to be
unsupported for tap connection to light fixtures, provided the length
doses not exceed __________ feet. - ANSWER-6


article 348.20 (2) (C)


What is the maximum spacing between supports, in ft., for 3/4 - inch,
rigid nonmetallic conduit? - ANSWER-3


table 352.30


Are single conductors with UF insulation permitted to be direct - buried
? - ANSWER-Yes , when all conductors are run in the same trench


article 300.5


Threadless fittings used with RIGID METAL CONDUCT installed in a
WET LOCATION shall be : - ANSWER-Listed for use in wet locations


The minimum width of clear WORKING SPACE required for a 24- inch
wide electrical panel supplied by 240/120 - volt supply is _______
inches. - ANSWER-30

Document information

Uploaded on
September 22, 2025
Number of pages
28
Written in
2025/2026
Type
Exam (elaborations)
Contains
Questions & answers
$29.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
johnkabiru
3.7
(572)
Sold
3317
Followers
2672
Items
6725
Last sold
2 weeks ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions