4G HOISTING QUESTION BANK 2025 ADVANCED REVIEW
HANDBOOK WITH ACCURATE A+ ANSWERS
✔✔What are the basic control found on a Stetco series catch basin machine - ✔✔-
Cable up/down (also known as the winch)
- Boom up/down (also known as the main)
- Retract in/extend out (also known as the extend)
- Dump body up/dump body down (also known as the dump)
- Swing left/right (Also known as the swing)
- Open clamshell/close clamshell (Also known as the bucket)
✔✔what can you pick up with the clamshell bucket other than basin tailings -
✔✔Nothing
✔✔what do you do when re fueling a catch basin unit - ✔✔Engine off , PTO disengaged
✔✔what is the proper way to operate a catch basin unit - ✔✔engine on , PTO engaged
✔✔on a specialty lawn mower when can the mower head be inspected - ✔✔only when
the mower is off and the deck is secured
✔✔on a flail head mower , can you only sharpen one flail? - ✔✔no, you need to
sharpen all flails evenly to maintain heads balance
✔✔on a flail head mower can you replace only one flail - ✔✔no, if you replace one flail
you need to replace all flails to maintain heads balance
✔✔how should the flail deck be place for proper opperation - ✔✔with the cutting debris
away from the operator
✔✔all mower decks should have what for safety - ✔✔all decks shall have flaps for
safety
✔✔on a flail mower how high should the deck be off the ground - ✔✔the deck should be
positioned so the deck skids are slightly off the ground
✔✔what safety apparel should be warn when operating a catch basin machine - ✔✔a
safety helmet, eye protection, hearing protection, gloves and safety boots
, ✔✔what safety apparel should be warn when operating a specialty lawn mower - ✔✔a
safety helmet, eye protection, hearing protection, and safety boots
✔✔how far can objects be thrown with a flail head mower - ✔✔capable of throwing up
to 100 yards
✔✔if theirs excessive vibration, what could be the problem - ✔✔a broken, or missing
flail
✔✔how long should the operator of a specialty mower stay in the seat after turning the
machine off to allow all parts to stop moving - ✔✔60 seconds
✔✔what is R.O.P.S - ✔✔Roll over protection systems
✔✔when driving down the road with a specialty lawn mower what safety devices must
be in place - ✔✔you must set the boom locking device
✔✔ what is the purpose of 520 C.M.R 6:00 - ✔✔to establish rules and regulations for
the safety of the public
✔✔what regulatory authority governs hoisting machinery - ✔✔520-CMR 6:00 MGL
chapter 146 section 53-54A
✔✔what type of system is used when working on a de energized circut - ✔✔lock out tag
out
✔✔in the event of death, the department of public safety must be notified of the
accident within what time frame - ✔✔within one hour of the accident
✔✔in the event of an incident, serious injury, property damage, the department of public
safety must be notified within what time frame - ✔✔within 1 hour of the accident and a
report filed within 48 hours
✔✔what should be done when the boom of a crane needs to be welded - ✔✔only
welded by a American welding society (AWS) certified welder, the boom must be
lowered to the ground, chocked, blocked and secured
✔✔what items should be checked on a daily inspection - ✔✔wire ropes, bearings,
gears, friction clutches, brakes, chain drives, subject to wear
HANDBOOK WITH ACCURATE A+ ANSWERS
✔✔What are the basic control found on a Stetco series catch basin machine - ✔✔-
Cable up/down (also known as the winch)
- Boom up/down (also known as the main)
- Retract in/extend out (also known as the extend)
- Dump body up/dump body down (also known as the dump)
- Swing left/right (Also known as the swing)
- Open clamshell/close clamshell (Also known as the bucket)
✔✔what can you pick up with the clamshell bucket other than basin tailings -
✔✔Nothing
✔✔what do you do when re fueling a catch basin unit - ✔✔Engine off , PTO disengaged
✔✔what is the proper way to operate a catch basin unit - ✔✔engine on , PTO engaged
✔✔on a specialty lawn mower when can the mower head be inspected - ✔✔only when
the mower is off and the deck is secured
✔✔on a flail head mower , can you only sharpen one flail? - ✔✔no, you need to
sharpen all flails evenly to maintain heads balance
✔✔on a flail head mower can you replace only one flail - ✔✔no, if you replace one flail
you need to replace all flails to maintain heads balance
✔✔how should the flail deck be place for proper opperation - ✔✔with the cutting debris
away from the operator
✔✔all mower decks should have what for safety - ✔✔all decks shall have flaps for
safety
✔✔on a flail mower how high should the deck be off the ground - ✔✔the deck should be
positioned so the deck skids are slightly off the ground
✔✔what safety apparel should be warn when operating a catch basin machine - ✔✔a
safety helmet, eye protection, hearing protection, gloves and safety boots
, ✔✔what safety apparel should be warn when operating a specialty lawn mower - ✔✔a
safety helmet, eye protection, hearing protection, and safety boots
✔✔how far can objects be thrown with a flail head mower - ✔✔capable of throwing up
to 100 yards
✔✔if theirs excessive vibration, what could be the problem - ✔✔a broken, or missing
flail
✔✔how long should the operator of a specialty mower stay in the seat after turning the
machine off to allow all parts to stop moving - ✔✔60 seconds
✔✔what is R.O.P.S - ✔✔Roll over protection systems
✔✔when driving down the road with a specialty lawn mower what safety devices must
be in place - ✔✔you must set the boom locking device
✔✔ what is the purpose of 520 C.M.R 6:00 - ✔✔to establish rules and regulations for
the safety of the public
✔✔what regulatory authority governs hoisting machinery - ✔✔520-CMR 6:00 MGL
chapter 146 section 53-54A
✔✔what type of system is used when working on a de energized circut - ✔✔lock out tag
out
✔✔in the event of death, the department of public safety must be notified of the
accident within what time frame - ✔✔within one hour of the accident
✔✔in the event of an incident, serious injury, property damage, the department of public
safety must be notified within what time frame - ✔✔within 1 hour of the accident and a
report filed within 48 hours
✔✔what should be done when the boom of a crane needs to be welded - ✔✔only
welded by a American welding society (AWS) certified welder, the boom must be
lowered to the ground, chocked, blocked and secured
✔✔what items should be checked on a daily inspection - ✔✔wire ropes, bearings,
gears, friction clutches, brakes, chain drives, subject to wear
