AFAB 110 MIDTERM STUDY GUIDE
EXAM QUESTIONS AND ANSWERS
Which of the following is not an example of a spatial instrument? -ANSplaying 3d tic tac
toe
There are three dimension terms common to drafting education. which of the following
is not correct? -ANSLength
The type of section view where the section view is no longer aligned in projection with
other views is:
A. removed
B. revolved
C. broken-out
D. offset -ANSoffset
Cylindrical object with an odd number of features, such as spokes or holes on a bolt
circle, could be better described with a ---- section. -ANSAligned
The broken-out section requires another type of line from the alphabet of lines to help
show where the removed portion was broken off in a jagged sort of way. this is the ---
line. -ANSShort break
When a --- section is created, it can be overlaid on the view or short break lines can be
used on each side of th e view to seperate it from the other visible lines. -ANSRevolved
Type of section wherein the section view is probably located out of projection with the
other regular or auxiliary views is a --- section. -ANSRemoved
There is a conventional practice that allows the drafter to leave a feature unhatched,
even though the cutting-plane line passes through it. Which of the following is not
relevent to this conventional practice? -ANSHole
If there is a large area that needs to receive section lines, the ____ section allows for
the section lines to only be applied around the perimeter. -ANSoutline
In assembly drawings, there may be some parts that do not receive section lines, but
rather the area cut by the cutting-plane line is filled-in solid. Which of the following is not
relevant to this conventional practice? -ANSSprings
T/F each type of line in the standards has one, and only one, option for its appearance.
-ANSFalse
EXAM QUESTIONS AND ANSWERS
Which of the following is not an example of a spatial instrument? -ANSplaying 3d tic tac
toe
There are three dimension terms common to drafting education. which of the following
is not correct? -ANSLength
The type of section view where the section view is no longer aligned in projection with
other views is:
A. removed
B. revolved
C. broken-out
D. offset -ANSoffset
Cylindrical object with an odd number of features, such as spokes or holes on a bolt
circle, could be better described with a ---- section. -ANSAligned
The broken-out section requires another type of line from the alphabet of lines to help
show where the removed portion was broken off in a jagged sort of way. this is the ---
line. -ANSShort break
When a --- section is created, it can be overlaid on the view or short break lines can be
used on each side of th e view to seperate it from the other visible lines. -ANSRevolved
Type of section wherein the section view is probably located out of projection with the
other regular or auxiliary views is a --- section. -ANSRemoved
There is a conventional practice that allows the drafter to leave a feature unhatched,
even though the cutting-plane line passes through it. Which of the following is not
relevent to this conventional practice? -ANSHole
If there is a large area that needs to receive section lines, the ____ section allows for
the section lines to only be applied around the perimeter. -ANSoutline
In assembly drawings, there may be some parts that do not receive section lines, but
rather the area cut by the cutting-plane line is filled-in solid. Which of the following is not
relevant to this conventional practice? -ANSSprings
T/F each type of line in the standards has one, and only one, option for its appearance.
-ANSFalse
