NICET Fire Alarm Level I Actual Exam Preparation
Newest 2025/2026 Complete 100 Questions And
Correct Answers (Verified Answers)|Already Graded
A+
The requirement forbidding fire alarm circuits from being T-tapped,
unless indicated by the manufacturer's instructions, is intended to
prevent which type of improper malfunction? - ANSWER-monitoring
integrity of installation conductors?
What is the maximum operating temperature of TW insulation? -
ANSWER-140 Degrees F, Table 310.15 (B)(16)
Which type of meter is used to measure the current draw of a strobe
circuit? - ANSWER-multimeter
What is an acceptable document for finding information on spacing of
video imaging smoke detection systems? - ANSWER-shop drawings in
submittal package
When pulling multiple cable through a junction box, the installer must
leave which minimum length of wire for splicing? - ANSWER-6 inches
of wire
, 2|Page
Which three of the following conditions are symptoms of a heart attack?
- ANSWER-heartburn, pain in chest, shortness of breath
Sprinkler water storage containers shall be supervised to indicate what
the water temperature drops to which level? - ANSWER-40 degrees F
According to NFPA 72, what is the minimum separation between
outgoing and returning conductors for a Class A loop that is horizontally
placed down to an 8 foot-wide corridor? - ANSWER-4 feet of separation
According to NFPA 72, a public emergency alarm reporting system shall
operate its emergency power source for which minimum time period? -
ANSWER-10 minutes
Where shall employers post a safety data sheet? - ANSWER-in the
technician's work area
According to NFPA 72, during an acceptance test, which method can be
utilized for testing a sprinkler waterflow switch? - ANSWER-Open the
inspector's test valve to cause an actual flow of water, ensure that the
control panel receives the alarm within 90 seconds
I'm technicians are working in a plant, remind to learn of the plants
safety regulations? - ANSWER-from OSHA regulations?