TLE LET REVIEWER QUESTIONS AND
ANSWERS | LATEST 2025 |
GUARANTEED PASS!!
T-square CORRECT ANSWERS Horizontal lines are best drawn using this instrument.
two CORRECT ANSWERS To completely describe a cone, sphere, and rectangular
pyramid, how many views are needed?
inclined line CORRECT ANSWERS What line is projected as a shorter line in a
drawing?
six views CORRECT ANSWERS Geometrical solids are usually drawn in how many
views?
working drawing CORRECT ANSWERS If all the information needed to complete
construction of a product is shown, then what do you call this type of mechanical
drawing?
guidelines CORRECT ANSWERS One of the best practices of a good draftsman is to
NEVER letter without __________.
Front view CORRECT ANSWERS In dimensioning an object, which view shows most
clearly the shape of the object?
b, e, f & h CORRECT ANSWERS Central horizontal strokes of some letters placed at
mid-height appear to be below center due to optical illusion. Which letters are they?
Gothic letters CORRECT ANSWERS Letters that are composed of uniform width
elements are classified as _________.
isometric view CORRECT ANSWERS Boxing method is the most widely used method
of drawing a _________.
Waist line CORRECT ANSWERS What is the horizontal guideline used to determine
the general height of lower-case letters?
dimension lines CORRECT ANSWERS These are lines to indicate the measurement of
objects and are represented by fine dark solid lines.
industry CORRECT ANSWERS Drafting is considered as the universal language of
__________.
,isometric drawing CORRECT ANSWERS If a drawing has an equal measure, what
does it refers to?
invisible line CORRECT ANSWERS When parts that are not seen are represented by
series of light dash lines then this line is classified as _________.
oblique drawing CORRECT ANSWERS What kind of drawing has one surface that is
parallel to the picture plane?
perspective drawing CORRECT ANSWERS This pictorial view is normally seen by the
observer's eyes. Which one is it?
T-square CORRECT ANSWERS A drawing instrument that serves as guide in drawing
vertical and diagonal lines as in triangles. It is generally used in drawing horizontal lines.
Which one is it?
extension line CORRECT ANSWERS What is that fine line used to show clearly the
dimension limits?
Phantom section or hidden section CORRECT ANSWERS A type of section used to
emphasize the interior construction of an object without destroying the continuity of the
exterior view.
above the view CORRECT ANSWERS Where should you place the name of the top
view for labeling?
center line CORRECT ANSWERS The lightest or finest line that represents the axis or
center of objects with symmetrical shapes is known as _________.
border lines CORRECT ANSWERS These are considered as the heaviest or darkest
lines that surround a drawing and are usually rectangular in shape.
freehand drawing CORRECT ANSWERS If a drawing is generally made without the aid
of drawing instruments and straight edges then it is classified as __________.
top view CORRECT ANSWERS This view is generally drawn directly above the front
view in an orthographic drawing. Which one is it?
dividers CORRECT ANSWERS Which of the following drawing instruments will you use
if you are to create distances into equal parts, transfer measurement and spacing points
or lines?
dimension lines CORRECT ANSWERS These lines are used to indicate the
measurement of objects and are represented by fine dark solid lines.
,shading CORRECT ANSWERS When solidity of an object is shown by gradual
darkening of its particular portion or portions, what process is involved?
invisible line CORRECT ANSWERS When parts that are not seen are represented by
series of light dash lines then this line is classified as
vertical line is drawn from top to bottom CORRECT ANSWERS One of the following is
NOT included in the participles of an orthographic drawing. Which one is it?
freehand drawing CORRECT ANSWERS Miley is asked to draw an art project without
the aid of drawing instruments and straight edges. Which of the following will she apply
to perform the task?
perspective drawing CORRECT ANSWERS If you are to present the pictorial drawing
that is most pleasing to the eyes of the viewer then one of the following methods should
be used.
cabinet drawing CORRECT ANSWERS What is that kind of oblique drawing which is
drawn with the side reduced to one half of the corresponding dimension in the
orthographic drawing?
three CORRECT ANSWERS if you are to draw an isometric drawing, how many axes
will you use to perform the job?
parallel perspective CORRECT ANSWERS A kind of perspective drawing with one
vanishing point is known as _________.
Heartwood CORRECT ANSWERS Which part of the wood is consisting of substances
that are insusceptible to attacks by insects and has high level of durability?
6 - 12% CORRECT ANSWERS Wood changes its shape during the drying process.
What should be the approximate moisture content or drying percentage of hardwood for
home furniture?
Parallel to fiber direction CORRECT ANSWERS Fiber direction of wood should be
taken into consideration when designing a product. Which direction of fiber reaches the
highest level of bending strength?
Heat treatment by hot stream CORRECT ANSWERS What process is used in making
bent wood products to easily distort the shape of the wood without reverting to its
original state?
Saw set CORRECT ANSWERS What tool is used to adjust the "kerf" or teeth of the saw
in order to reduce friction between the saw blade and wood, and to discharge the saw
dust easily?
, 15 - 30 degrees CORRECT ANSWERS In sawing soft and thin wood, what is the
recommended angle of the saw to the wood?
Run the hand plane parallel to the fiber direction of the wood CORRECT ANSWERS
Aside from having a sharp blade, how should you run a hand plane in a wood to get a
good result?
Mortise and tennon joint CORRECT ANSWERS What type of wood joint should be used
in constructing chairs and tables to obtain strength and durability?
Screws CORRECT ANSWERS When you intend to disassemble the product later or
need to obtain a strong joint, what construction hardware is appropriate to use?
Stain CORRECT ANSWERS What finishing material may be used to obtain a suitable
wood color before applying a transparent finishing material?
lumbering CORRECT ANSWERS One of the following is the operation performed in the
preparation of wood for commercial purposes. Which one is it?
seasoning CORRECT ANSWERS Lumber is as good as its preparation. When it is
dried the process involved is ____________.
2.54 CORRECT ANSWERS What is the conversion equivalent of one inch to
centimeters?
rip saw CORRECT ANSWERS There are numerous kinds of saw. Which one is used
for sawing along the grain of wood?
S4S CORRECT ANSWERS A surfaced lumber where four of its side are smooth or
planed is called _________.
back saw CORRECT ANSWERS Which of the following is used for the cutting and for
making delicate wood joint?
inside caliper CORRECT ANSWERS A kind of caliper used for measuring the inside
diameter of a cylinder is ____________.
chisel CORRECT ANSWERS Removing or paring away some part of the wood requires
the use of this hand tool.
claw hammer CORRECT ANSWERS Nails are essential material in putting in place
pieces of wood. To drive or pull a nail the right tool for the job is ____________.
coping saw CORRECT ANSWERS Sawing irregular shapes on thin pieces of wood is
done with the use of _________.
ANSWERS | LATEST 2025 |
GUARANTEED PASS!!
T-square CORRECT ANSWERS Horizontal lines are best drawn using this instrument.
two CORRECT ANSWERS To completely describe a cone, sphere, and rectangular
pyramid, how many views are needed?
inclined line CORRECT ANSWERS What line is projected as a shorter line in a
drawing?
six views CORRECT ANSWERS Geometrical solids are usually drawn in how many
views?
working drawing CORRECT ANSWERS If all the information needed to complete
construction of a product is shown, then what do you call this type of mechanical
drawing?
guidelines CORRECT ANSWERS One of the best practices of a good draftsman is to
NEVER letter without __________.
Front view CORRECT ANSWERS In dimensioning an object, which view shows most
clearly the shape of the object?
b, e, f & h CORRECT ANSWERS Central horizontal strokes of some letters placed at
mid-height appear to be below center due to optical illusion. Which letters are they?
Gothic letters CORRECT ANSWERS Letters that are composed of uniform width
elements are classified as _________.
isometric view CORRECT ANSWERS Boxing method is the most widely used method
of drawing a _________.
Waist line CORRECT ANSWERS What is the horizontal guideline used to determine
the general height of lower-case letters?
dimension lines CORRECT ANSWERS These are lines to indicate the measurement of
objects and are represented by fine dark solid lines.
industry CORRECT ANSWERS Drafting is considered as the universal language of
__________.
,isometric drawing CORRECT ANSWERS If a drawing has an equal measure, what
does it refers to?
invisible line CORRECT ANSWERS When parts that are not seen are represented by
series of light dash lines then this line is classified as _________.
oblique drawing CORRECT ANSWERS What kind of drawing has one surface that is
parallel to the picture plane?
perspective drawing CORRECT ANSWERS This pictorial view is normally seen by the
observer's eyes. Which one is it?
T-square CORRECT ANSWERS A drawing instrument that serves as guide in drawing
vertical and diagonal lines as in triangles. It is generally used in drawing horizontal lines.
Which one is it?
extension line CORRECT ANSWERS What is that fine line used to show clearly the
dimension limits?
Phantom section or hidden section CORRECT ANSWERS A type of section used to
emphasize the interior construction of an object without destroying the continuity of the
exterior view.
above the view CORRECT ANSWERS Where should you place the name of the top
view for labeling?
center line CORRECT ANSWERS The lightest or finest line that represents the axis or
center of objects with symmetrical shapes is known as _________.
border lines CORRECT ANSWERS These are considered as the heaviest or darkest
lines that surround a drawing and are usually rectangular in shape.
freehand drawing CORRECT ANSWERS If a drawing is generally made without the aid
of drawing instruments and straight edges then it is classified as __________.
top view CORRECT ANSWERS This view is generally drawn directly above the front
view in an orthographic drawing. Which one is it?
dividers CORRECT ANSWERS Which of the following drawing instruments will you use
if you are to create distances into equal parts, transfer measurement and spacing points
or lines?
dimension lines CORRECT ANSWERS These lines are used to indicate the
measurement of objects and are represented by fine dark solid lines.
,shading CORRECT ANSWERS When solidity of an object is shown by gradual
darkening of its particular portion or portions, what process is involved?
invisible line CORRECT ANSWERS When parts that are not seen are represented by
series of light dash lines then this line is classified as
vertical line is drawn from top to bottom CORRECT ANSWERS One of the following is
NOT included in the participles of an orthographic drawing. Which one is it?
freehand drawing CORRECT ANSWERS Miley is asked to draw an art project without
the aid of drawing instruments and straight edges. Which of the following will she apply
to perform the task?
perspective drawing CORRECT ANSWERS If you are to present the pictorial drawing
that is most pleasing to the eyes of the viewer then one of the following methods should
be used.
cabinet drawing CORRECT ANSWERS What is that kind of oblique drawing which is
drawn with the side reduced to one half of the corresponding dimension in the
orthographic drawing?
three CORRECT ANSWERS if you are to draw an isometric drawing, how many axes
will you use to perform the job?
parallel perspective CORRECT ANSWERS A kind of perspective drawing with one
vanishing point is known as _________.
Heartwood CORRECT ANSWERS Which part of the wood is consisting of substances
that are insusceptible to attacks by insects and has high level of durability?
6 - 12% CORRECT ANSWERS Wood changes its shape during the drying process.
What should be the approximate moisture content or drying percentage of hardwood for
home furniture?
Parallel to fiber direction CORRECT ANSWERS Fiber direction of wood should be
taken into consideration when designing a product. Which direction of fiber reaches the
highest level of bending strength?
Heat treatment by hot stream CORRECT ANSWERS What process is used in making
bent wood products to easily distort the shape of the wood without reverting to its
original state?
Saw set CORRECT ANSWERS What tool is used to adjust the "kerf" or teeth of the saw
in order to reduce friction between the saw blade and wood, and to discharge the saw
dust easily?
, 15 - 30 degrees CORRECT ANSWERS In sawing soft and thin wood, what is the
recommended angle of the saw to the wood?
Run the hand plane parallel to the fiber direction of the wood CORRECT ANSWERS
Aside from having a sharp blade, how should you run a hand plane in a wood to get a
good result?
Mortise and tennon joint CORRECT ANSWERS What type of wood joint should be used
in constructing chairs and tables to obtain strength and durability?
Screws CORRECT ANSWERS When you intend to disassemble the product later or
need to obtain a strong joint, what construction hardware is appropriate to use?
Stain CORRECT ANSWERS What finishing material may be used to obtain a suitable
wood color before applying a transparent finishing material?
lumbering CORRECT ANSWERS One of the following is the operation performed in the
preparation of wood for commercial purposes. Which one is it?
seasoning CORRECT ANSWERS Lumber is as good as its preparation. When it is
dried the process involved is ____________.
2.54 CORRECT ANSWERS What is the conversion equivalent of one inch to
centimeters?
rip saw CORRECT ANSWERS There are numerous kinds of saw. Which one is used
for sawing along the grain of wood?
S4S CORRECT ANSWERS A surfaced lumber where four of its side are smooth or
planed is called _________.
back saw CORRECT ANSWERS Which of the following is used for the cutting and for
making delicate wood joint?
inside caliper CORRECT ANSWERS A kind of caliper used for measuring the inside
diameter of a cylinder is ____________.
chisel CORRECT ANSWERS Removing or paring away some part of the wood requires
the use of this hand tool.
claw hammer CORRECT ANSWERS Nails are essential material in putting in place
pieces of wood. To drive or pull a nail the right tool for the job is ____________.
coping saw CORRECT ANSWERS Sawing irregular shapes on thin pieces of wood is
done with the use of _________.
