Master oil Questions and Graded Answers.
The continued use of an existing connection of a solid fuel burning appliance to a chimney flue
to which another appliance burning oil or solid fuel is connected for any chimney existing and in
use before feb 2, 1998 shall be permitted assuming... - Sufficent draft for each appliance,
the chimney is lined and structuraly intact, a carbon monoxide detector is installed near a
bedroom
The connection of a solid fuel burning appliance to a chimney flue to which another appliance
burning oil or solid fuel is connected for any chimney existing and in use on or after February 2,
1998 shall be permitted as long as... - Sufficient draft is available for each appliance, the
chimney is lined and structurally intact, a carbon monoxide detector installed near a bedroom,
the solid fuel appliance has been listed by an independent nationally recognized testing lab
approved by the board, the solid fuel burning appliance is installed in accordance with
manufacturers specs.
Fuel oil licenses expire... - Every 2 years
If the owner, occupant of any building or an installer neglects or refuses without justification for
more than ____ days to comply with any order of a state fuel inspector, the person commits a
civil violation for a fine of $100 each day neglected - 10
A person ordered by a state fuel inspector to correct a deficiency or to vacate a building or
structure may appeal the order by filling a written notice of appeal with the board within ____
days after receipt of the order - 30
An apprentice oil burner technician may assist in making oil installations and repairing/servicing
of oil burning equipment under the ____________ of a master or journeyman oil tech who holds
the same or higher authority - Direct supervision
an apprentice oil burner tech may - Bleed an oil burner without direct supervision
,An apprentice oil burner tech may clean oil burning equipment without direct supervision if the
apprentice has - Successfully completed 160hrs of training approved by the board or
completed at least one year of supervised oil burner work experience
An apprentice oil burner technician is permitted to replace a t stat without direct supervision of a
journeymen or master oil tech - False
After passing a journeymen/master oil burner exam, a technician has ____ days to file for license
before having to retest - 2 years
An apprentice oil burner tech who has completed atleast one year of supervised work experience
is permitted to ____________ without direct supervision - Brush/vacuum heating
appliance, replace nozzles/belts/filters/electrodes, preform combustion efficiency test/test safety
controls
The master oil burner tech is permitted to hook up to a water feed for a boiler________ -
Only to existing piping within the same room
A journeyman oil tech must at all times be under the indirect supervision of a master oil
technician who accepts full responsibility for the ___________ of the journeymen tech -
Work ethic, performance, training required
It is the duty of the master oil technician to _______ any installation work performed by any
licensee for whom the master is responsible for at the conclusion of an installation -
Inspect personally
Whenever a master oil tech ceases to be an apprentice or journeymen's supervising master, they
must notify the ________ in writing, a copy of which shall be kept in both the supervisee's and
and former supervising masters file - Board/supervisee
A master oil tech who sells, contracts, dispatches, or subcontracts any work or installation to
another master oil tech or other licensee is responsible for - The completion of the
installation and the work performed
,A master or journeyman oil tech may clean a combination solid fuel and oil unit and
service/repair the oil burner assembly without direct supervision if _________ - They are
licensed as an apprentice solid fuel technician
A journeyman oil tech must at all times be under the indirect supervision of a master oil burning
who accepts _______ for the work ethic and performance of the journeyman oil tech -
Full responsibility
A journeyman or apprentice oil tech shall not work on any oil equipment if he - Does not
have a supervising master
A journeyman oil tech shall not have more than _____ apprentice techs working under the
journeyman's direct supervision at one time - 2
Where the circumstances or conditions of any particular installation are so unusual as to render
the strict application of a standard imposed by the boards rules impractical, the board may permit
such modifications provide - There is equivalent degree of safety, it is consistent with
good engineering practice, it is reviewed and approved by the senior fuel inspector
When performing any service on a customers heating system, the licensee must notify the
property owner in writing of - Any code violations/make recommendations to address
them
When performing annual tune up on a heating system or new installation, a _________ must be
conducted and a copy of results must be posted on site - Combustion efficiency test
Whenever a furnace, direct fired water heater, or boiler is installed, _______ must be brought
into compliance of NFPA 31 and all other rules of the board - The total installation
________ is NOT required whenever a new burner is installed - Properly installed service
receptacle
, A new heating system installation requires - A heat loss system design, a system load
calculation, a combustion efficiency test
When an emergency situation arises that does not allow adequate time to get the chimney lined
and or repaired before installing the new heating appliance, the licensee may defer the required
repairs for up to - 90 days
The low water cutoff shall be installed - Above the boiler crown sheet
A thermally operated oil shutoff valve must be located at the - Oil burner and oil supply
tank
Shut off valves or other obstructive devices are prohibited between the boiler and - Safety
controls
A check valve may be used in the oil supply line from the tank to the burner - True
When outside tanks are used, a ______ must be installed where the supply line enters the
building and where the oil line enters the room of the appliance - Thermally operated
shutoff valve
When inside tanks are used and the oil supply tank is installed in a separate room a thermally
operated shutoff valve must be installed ________ - Immediately inside the room as the
oil line enters the room where the appliance is located
Whenever the oil supply is taken from the top of an oil tank, whether the oil tank is outside or
inside a ________ must be installed at the tank - Thermally operated shutoff valve
The continued use of an existing connection of a solid fuel burning appliance to a chimney flue
to which another appliance burning oil or solid fuel is connected for any chimney existing and in
use before feb 2, 1998 shall be permitted assuming... - Sufficent draft for each appliance,
the chimney is lined and structuraly intact, a carbon monoxide detector is installed near a
bedroom
The connection of a solid fuel burning appliance to a chimney flue to which another appliance
burning oil or solid fuel is connected for any chimney existing and in use on or after February 2,
1998 shall be permitted as long as... - Sufficient draft is available for each appliance, the
chimney is lined and structurally intact, a carbon monoxide detector installed near a bedroom,
the solid fuel appliance has been listed by an independent nationally recognized testing lab
approved by the board, the solid fuel burning appliance is installed in accordance with
manufacturers specs.
Fuel oil licenses expire... - Every 2 years
If the owner, occupant of any building or an installer neglects or refuses without justification for
more than ____ days to comply with any order of a state fuel inspector, the person commits a
civil violation for a fine of $100 each day neglected - 10
A person ordered by a state fuel inspector to correct a deficiency or to vacate a building or
structure may appeal the order by filling a written notice of appeal with the board within ____
days after receipt of the order - 30
An apprentice oil burner technician may assist in making oil installations and repairing/servicing
of oil burning equipment under the ____________ of a master or journeyman oil tech who holds
the same or higher authority - Direct supervision
an apprentice oil burner tech may - Bleed an oil burner without direct supervision
,An apprentice oil burner tech may clean oil burning equipment without direct supervision if the
apprentice has - Successfully completed 160hrs of training approved by the board or
completed at least one year of supervised oil burner work experience
An apprentice oil burner technician is permitted to replace a t stat without direct supervision of a
journeymen or master oil tech - False
After passing a journeymen/master oil burner exam, a technician has ____ days to file for license
before having to retest - 2 years
An apprentice oil burner tech who has completed atleast one year of supervised work experience
is permitted to ____________ without direct supervision - Brush/vacuum heating
appliance, replace nozzles/belts/filters/electrodes, preform combustion efficiency test/test safety
controls
The master oil burner tech is permitted to hook up to a water feed for a boiler________ -
Only to existing piping within the same room
A journeyman oil tech must at all times be under the indirect supervision of a master oil
technician who accepts full responsibility for the ___________ of the journeymen tech -
Work ethic, performance, training required
It is the duty of the master oil technician to _______ any installation work performed by any
licensee for whom the master is responsible for at the conclusion of an installation -
Inspect personally
Whenever a master oil tech ceases to be an apprentice or journeymen's supervising master, they
must notify the ________ in writing, a copy of which shall be kept in both the supervisee's and
and former supervising masters file - Board/supervisee
A master oil tech who sells, contracts, dispatches, or subcontracts any work or installation to
another master oil tech or other licensee is responsible for - The completion of the
installation and the work performed
,A master or journeyman oil tech may clean a combination solid fuel and oil unit and
service/repair the oil burner assembly without direct supervision if _________ - They are
licensed as an apprentice solid fuel technician
A journeyman oil tech must at all times be under the indirect supervision of a master oil burning
who accepts _______ for the work ethic and performance of the journeyman oil tech -
Full responsibility
A journeyman or apprentice oil tech shall not work on any oil equipment if he - Does not
have a supervising master
A journeyman oil tech shall not have more than _____ apprentice techs working under the
journeyman's direct supervision at one time - 2
Where the circumstances or conditions of any particular installation are so unusual as to render
the strict application of a standard imposed by the boards rules impractical, the board may permit
such modifications provide - There is equivalent degree of safety, it is consistent with
good engineering practice, it is reviewed and approved by the senior fuel inspector
When performing any service on a customers heating system, the licensee must notify the
property owner in writing of - Any code violations/make recommendations to address
them
When performing annual tune up on a heating system or new installation, a _________ must be
conducted and a copy of results must be posted on site - Combustion efficiency test
Whenever a furnace, direct fired water heater, or boiler is installed, _______ must be brought
into compliance of NFPA 31 and all other rules of the board - The total installation
________ is NOT required whenever a new burner is installed - Properly installed service
receptacle
, A new heating system installation requires - A heat loss system design, a system load
calculation, a combustion efficiency test
When an emergency situation arises that does not allow adequate time to get the chimney lined
and or repaired before installing the new heating appliance, the licensee may defer the required
repairs for up to - 90 days
The low water cutoff shall be installed - Above the boiler crown sheet
A thermally operated oil shutoff valve must be located at the - Oil burner and oil supply
tank
Shut off valves or other obstructive devices are prohibited between the boiler and - Safety
controls
A check valve may be used in the oil supply line from the tank to the burner - True
When outside tanks are used, a ______ must be installed where the supply line enters the
building and where the oil line enters the room of the appliance - Thermally operated
shutoff valve
When inside tanks are used and the oil supply tank is installed in a separate room a thermally
operated shutoff valve must be installed ________ - Immediately inside the room as the
oil line enters the room where the appliance is located
Whenever the oil supply is taken from the top of an oil tank, whether the oil tank is outside or
inside a ________ must be installed at the tank - Thermally operated shutoff valve
