Technical Rescue I Confined Space Rescue
UPDATED ACTUAL Exam Questions and
CORRECT Answers
OSHA __ CFR ____.___, Permit Required Confined Spaces is written to protect general industry
employees making entry into confined spaces and establishes a permit space program -
CORRECT ANSWER - OSHA 29 CFR 1910.146
OSHA __ CFR ____.___, Control of Hazardous Energy (Lockout/Tagout) provides isolation
guidance - CORRECT ANSWER - OSHA 29 CFR 1910.147
AFI __-___, Chapter 23 Confined Spaces, implements the use of OSHA 29 CFR 1910.146 -
CORRECT ANSWER - AFI 91-203
NFPA ____, Standard for Technical Rescuer Professional Qualifications establishes general job
performance requirements for rescue technicians - CORRECT ANSWER - NFPA 1006
NFPA _____, Standard for Fire Department Occupational Safety and Health Program covers the
minimum requirements for fire service related occupational safety and health program -
CORRECT ANSWER - NFPA 1500
NFPA _____, Standard on Life Safety Rope and Equipment for Emergency Services defines
testing requirements, product labeling directions, and certification procedures for rope rescue
equipment - CORRECT ANSWER - NFPA 1983
A confined space is considered any space that is large enough and configured so that a worker
can bodily enter and work, has a limited means of ______ and _______, and is not designed for
continuous human ________ - CORRECT ANSWER - Entry and exit, occupancy
Confined spaces are considered either _____ _____ or non-______ _______ - CORRECT
ANSWER - Permit required or not permit required
, Confined spaces are classified on the basis of potential hazards inside space such as: _______
_______, _______ contained in the space, and the internal ________ of the space - CORRECT
ANSWER - Hazardous materials, materials, configuration
A _____ ______ space is one that contains or has the potential to contain a hazardous
atmosphere - CORRECT ANSWER - Permit required
____ spaces are considered permit required until proven otherwise - CORRECT
ANSWER - All
A _____ _____ ______ confined space does not contain an atmospheric hazard - CORRECT
ANSWER - Non permit required
Permit spaces are classified into ______ routine types of spaces found in industrial settings -
CORRECT ANSWER - Twelve
Opening sizes are either classified as greater than or less than ___" - CORRECT
ANSWER - 24"
Configuration refers to the opening as being ______ or _____ - CORRECT ANSWER -
Round or angular
Accessibility refers to the _______ into the space and the _______ to the space - CORRECT
ANSWER - Passage, approach
Passage into the space refers to the angle of entry being ________ or ________ - CORRECT
ANSWER - Horizontal or vertical
Approach to the space refers to the openings being ______ or non-________ - CORRECT
ANSWER - Elevated or non-elevated
UPDATED ACTUAL Exam Questions and
CORRECT Answers
OSHA __ CFR ____.___, Permit Required Confined Spaces is written to protect general industry
employees making entry into confined spaces and establishes a permit space program -
CORRECT ANSWER - OSHA 29 CFR 1910.146
OSHA __ CFR ____.___, Control of Hazardous Energy (Lockout/Tagout) provides isolation
guidance - CORRECT ANSWER - OSHA 29 CFR 1910.147
AFI __-___, Chapter 23 Confined Spaces, implements the use of OSHA 29 CFR 1910.146 -
CORRECT ANSWER - AFI 91-203
NFPA ____, Standard for Technical Rescuer Professional Qualifications establishes general job
performance requirements for rescue technicians - CORRECT ANSWER - NFPA 1006
NFPA _____, Standard for Fire Department Occupational Safety and Health Program covers the
minimum requirements for fire service related occupational safety and health program -
CORRECT ANSWER - NFPA 1500
NFPA _____, Standard on Life Safety Rope and Equipment for Emergency Services defines
testing requirements, product labeling directions, and certification procedures for rope rescue
equipment - CORRECT ANSWER - NFPA 1983
A confined space is considered any space that is large enough and configured so that a worker
can bodily enter and work, has a limited means of ______ and _______, and is not designed for
continuous human ________ - CORRECT ANSWER - Entry and exit, occupancy
Confined spaces are considered either _____ _____ or non-______ _______ - CORRECT
ANSWER - Permit required or not permit required
, Confined spaces are classified on the basis of potential hazards inside space such as: _______
_______, _______ contained in the space, and the internal ________ of the space - CORRECT
ANSWER - Hazardous materials, materials, configuration
A _____ ______ space is one that contains or has the potential to contain a hazardous
atmosphere - CORRECT ANSWER - Permit required
____ spaces are considered permit required until proven otherwise - CORRECT
ANSWER - All
A _____ _____ ______ confined space does not contain an atmospheric hazard - CORRECT
ANSWER - Non permit required
Permit spaces are classified into ______ routine types of spaces found in industrial settings -
CORRECT ANSWER - Twelve
Opening sizes are either classified as greater than or less than ___" - CORRECT
ANSWER - 24"
Configuration refers to the opening as being ______ or _____ - CORRECT ANSWER -
Round or angular
Accessibility refers to the _______ into the space and the _______ to the space - CORRECT
ANSWER - Passage, approach
Passage into the space refers to the angle of entry being ________ or ________ - CORRECT
ANSWER - Horizontal or vertical
Approach to the space refers to the openings being ______ or non-________ - CORRECT
ANSWER - Elevated or non-elevated
