IPC j-std-001G questions and answers
graded A+ graded A+
The conductor diameter is the outside diameter of wire, either stranded or solid, without the
insulation - correct answer ✔✔Conductor Diameter
he wire diameter is the outside diameter of wire, either stranded or solid, including insulation if
present - correct answer ✔✔Wire Diameter
The determination of how defects should be treated. Dispositions include, but are not limited
to, rework, use as is, scrap or repair. - correct answer ✔✔Disposition
The minimum spacing between noncommon uninsulated conductors, e.g., patterns, materials,
hardware, residue, is referre<;l to as "minimum electrical clearance" throughout this document
and is defined in the applicable design standard or on the approved or controlled
documentation. In the absence of a known design standard use Appendix B (derived from IPC-
2221). - correct answer ✔✔Electrical Clearance
A generic term for a substance, debris, particulate matter or article alien to the assembly or
system. - correct answer ✔✔FOD (Foreign Object Debris)
The term "high voltage" will vary by design and application. The high voltage criteria in this
document are only applicable when specifically required in the drawings/procurement
documentation. - correct answer ✔✔High Volatage
The individual, organization, or company responsible for the assembly process and verification
operations necessary to ensure full compliance of assemblies to this Standard. - correct answer
✔✔Manufacturer (Assembler)
graded A+ graded A+
The conductor diameter is the outside diameter of wire, either stranded or solid, without the
insulation - correct answer ✔✔Conductor Diameter
he wire diameter is the outside diameter of wire, either stranded or solid, including insulation if
present - correct answer ✔✔Wire Diameter
The determination of how defects should be treated. Dispositions include, but are not limited
to, rework, use as is, scrap or repair. - correct answer ✔✔Disposition
The minimum spacing between noncommon uninsulated conductors, e.g., patterns, materials,
hardware, residue, is referre<;l to as "minimum electrical clearance" throughout this document
and is defined in the applicable design standard or on the approved or controlled
documentation. In the absence of a known design standard use Appendix B (derived from IPC-
2221). - correct answer ✔✔Electrical Clearance
A generic term for a substance, debris, particulate matter or article alien to the assembly or
system. - correct answer ✔✔FOD (Foreign Object Debris)
The term "high voltage" will vary by design and application. The high voltage criteria in this
document are only applicable when specifically required in the drawings/procurement
documentation. - correct answer ✔✔High Volatage
The individual, organization, or company responsible for the assembly process and verification
operations necessary to ensure full compliance of assemblies to this Standard. - correct answer
✔✔Manufacturer (Assembler)
