WITH 100 QUESTIONS AND CORRECT ANSWERS/
ADVANCE RIGGER TEST PRACTICE EXAM
2025/2026 (NEW!!)
The Advance Rigger Test 2025/2026 Practice Exam includes
100 updated questions with correct answers, designed to help
candidates prepare with confidence. This latest version covers
essential rigging principles, safety standards, and practical
applications, making it a reliable resource for effective test
readiness. Perfect for those aiming to pass on the first
attempt.
Which type of eyebolt is preferred for angular lifting or horizontal pulling?
• A. shoulder less eyebolt
• B. shoulder type eyebolt
• C. ringbolt
• D. swivel eyebolt - CORRECT ANSWER-B. Shoulder type eyebolt
A demolition operation where the actual weight of a load may be in doubt is usually designated as a
• A. critical lift
• B. standard lift
• C. planned lift
• D. questionable lift - CORRECT ANSWER-A. Critical lift
Which of the following conditions can be controlled by the lift planner?
• A. Wind speed
• B. Wind-bome dust
• C. Outside temperature
• D. Ground compaction - CORRECT ANSWER-D. Ground compaction
, Which of the following standards distinguishes between standard and critical lifts?
• A. 29 CFR 1926.1408
• B. 29 CFR 1926.751|
• C. ASME P30.1
• D. ASME 830.5 - CORRECT ANSWER-B. 29 CFR 1926.7511
All of the following are mobile crane safety devices EXCEPT:
• A. boom stop
• B. anti-two block
• C. level indicator
• D. fuel indicator - CORRECT ANSWER-D. Fuel indicator
Prior to usage personnel lifting platforms shall be proof tested to
• A. 100% of the platform rating
• B. 125% of the platform rating
• C. 150% of the platform rating
• D. 200% of the platform rating - CORRECT ANSWER-B. 125% of the platform rating
Rigging for attaching the personnel platform to the hoist line shall be used:
• A. once and then load tested to 200% of rated capacity
• B. once and then replaced
• C. only with adequately rated screw pin shackles
• D. once for hoisting personnel - CORRECT ANSWER-C. Only with adequately rated screw pin
shackles
The directions for the proper use, maintenance, and inspection of personnel platforms may be found
in.
• A. ASME P30.1
• B. the manufacturers guidelines
• C. OSHA regulations
• D. rigging manuals - CORRECT ANSWER-B. The manufactures guidelines