Fire & Life Safety Director Course Review Questions
With Proven Solutions
What should fire wardens and deputy fire wardens be familiar with?
Accurate Answer:- All answers are correct: manual alarms, exits, and fire
warden phones.
What is the most correct action for the FLS Director when notified of a fire on
the 3rd floor? Accurate Answer:- Respond to the fire command station
and make sure the Fire Department has been notified.
When an FLSD is not required to be on duty in a Class B building, who must be
on duty? If there are still occupants Accurate Answer:- Building
Evacuation Supervisor
How many Floor Wardens are required for a 35th floor divided into 3
separate occupancies of 7,000 square feet each? Accurate Answer:- 1
Floor Warden.
For a 45th floor occupancy of 40,000 square feet, how many Floor Wardens
and Deputy Floor Wardens are required? Accurate Answer:- 1 Floor
Warden and 6 Deputies.
Who is responsible for training the Fire Brigade, Building Evacuation
Supervisor, Floor Warden, and Deputy Floor Warden? Accurate Answer:-
FLS Director.
Where should occupants of a fire floor be removed unless otherwise directed?
Accurate Answer:- 3 floors below the fire floor.
What is the job of the building evacuation supervisor during a fire?
Accurate Answer:- Train the building occupants In proper evacuation
procedure
Convection is heat Accurate Answer:- Transferred by the movement of
air or liquid
, What is a smoke explosion that can knock down walls called? Accurate
Answer:- Backdraft
Feeling warmth from the sun is an example of what type of heat transfer?
Accurate Answer:- Radiation
A smoke detector that will give its location upon activation is known as
Accurate Answer:- Addressable .
A Class B fire alarm pull station will do all of the following EXCEPT:
Accurate Answer:- recall elevators in the affected bank
An extension cord that overheats and causes a rug to catch on fire is an
example of Accurate Answer:- Conduction
What does a signal from a water flow switch installed on a sprinkler system
indicate? Accurate Answer:- Fire alarm signal
What is the correct way to reset the fire alarm system after activation from a
manual pull station? Accurate Answer:- A key is always required to
reset the fire alarm system
What do supervisory devices serve to do? Accurate Answer:- Monitor
important parts of a fire protection system.
Which signal indicates that a system or device being monitored is in an
abnormal state? Accurate Answer:- Supervisory signal
What capability does the fire command station NOT have Accurate
Answer:- Cancel central station company notification
A fire alarm signal received by an initiating device Accurate Answer:-
Can be either manual or automatic
Which statement about fire alarm signals is INCORRECT? Accurate
Answer:- It indicates an actual fire
What does a fire alarm control panel monitor? Accurate Answer:- Fire
alarm, supervisory, and trouble signals.
With Proven Solutions
What should fire wardens and deputy fire wardens be familiar with?
Accurate Answer:- All answers are correct: manual alarms, exits, and fire
warden phones.
What is the most correct action for the FLS Director when notified of a fire on
the 3rd floor? Accurate Answer:- Respond to the fire command station
and make sure the Fire Department has been notified.
When an FLSD is not required to be on duty in a Class B building, who must be
on duty? If there are still occupants Accurate Answer:- Building
Evacuation Supervisor
How many Floor Wardens are required for a 35th floor divided into 3
separate occupancies of 7,000 square feet each? Accurate Answer:- 1
Floor Warden.
For a 45th floor occupancy of 40,000 square feet, how many Floor Wardens
and Deputy Floor Wardens are required? Accurate Answer:- 1 Floor
Warden and 6 Deputies.
Who is responsible for training the Fire Brigade, Building Evacuation
Supervisor, Floor Warden, and Deputy Floor Warden? Accurate Answer:-
FLS Director.
Where should occupants of a fire floor be removed unless otherwise directed?
Accurate Answer:- 3 floors below the fire floor.
What is the job of the building evacuation supervisor during a fire?
Accurate Answer:- Train the building occupants In proper evacuation
procedure
Convection is heat Accurate Answer:- Transferred by the movement of
air or liquid
, What is a smoke explosion that can knock down walls called? Accurate
Answer:- Backdraft
Feeling warmth from the sun is an example of what type of heat transfer?
Accurate Answer:- Radiation
A smoke detector that will give its location upon activation is known as
Accurate Answer:- Addressable .
A Class B fire alarm pull station will do all of the following EXCEPT:
Accurate Answer:- recall elevators in the affected bank
An extension cord that overheats and causes a rug to catch on fire is an
example of Accurate Answer:- Conduction
What does a signal from a water flow switch installed on a sprinkler system
indicate? Accurate Answer:- Fire alarm signal
What is the correct way to reset the fire alarm system after activation from a
manual pull station? Accurate Answer:- A key is always required to
reset the fire alarm system
What do supervisory devices serve to do? Accurate Answer:- Monitor
important parts of a fire protection system.
Which signal indicates that a system or device being monitored is in an
abnormal state? Accurate Answer:- Supervisory signal
What capability does the fire command station NOT have Accurate
Answer:- Cancel central station company notification
A fire alarm signal received by an initiating device Accurate Answer:-
Can be either manual or automatic
Which statement about fire alarm signals is INCORRECT? Accurate
Answer:- It indicates an actual fire
What does a fire alarm control panel monitor? Accurate Answer:- Fire
alarm, supervisory, and trouble signals.
