AVIXA CTS SAMPLE QUESTIONS WITH ALL CORRECT &
100% VERIFIED ANSWERS|ACTUAL EXAM|ALREADY
GRADED A+
What is the BEST way to determine how reverberant a space is?
-Clap your hands and listen for an echo
-Ask the client if anyone has complained that the room is too noisy
-Use an RT60 meter
-Use a DB SPL meter ✔Correct answer-Use an RT60 meter
The correct time to discuss visible finishes for wall plates, surface mount speakers, and wall mounted
screen casings is during the:
-Ordering
-Installation
-Site survey
-Contract award ✔Correct answer-Site survey
While surveying a conference room for a system upgrade, an engineer measures 55 dB SPL A-wtd of
ambient noise when the room is empty. How should they proceed? -Add voice lift to the system
proposal
-Add more loudspeakers to the system proposal
-Speak with the client about getting more information on how to address the noise source
-Do nothing, this level of ambient noise is well within system tolerance ✔Correct answer-Speak
with the client about getting more information on how to address the noise source
A client needs to add videoconferencing functionality for high-level, private meetings. Which of
following planned space types should you advise be ruled out?
-Divisible room
-Boardroom
-Conference room -Classroom ✔Correct answer-Divisible room
Which phase of an AV project comes immediately AFTER the Program Phase? -The Design Phase
-Project Planning and Coordination Phase
-The Verification Phase
-The Documentation Phase ✔Correct answer-The Design Phase
Which is NOT presented in the program report: -Executive Summary -Detailed list of equipment -
Budgets
-Infrastructure Considerations ✔Correct answer-Detailed list of equipment
When preparing an executive summary what should be included for submittal to the client?
-A deep dive, including full technical specficiation, of all equipment to be used in the design.
-An estimation of how many change orders might be required if the client doesn't use your design.
-References to new and emerging technologies that should be considered for future spaces.
-An overview of the programming process including who was surveyed during the process.
✔Correct answer-An overview of the programming process including who was surveyed during the
process.
, Which system is used to show colors from a video display?
-Additive color system -Subtractive color system -Plus/minus color system -Recover color system
✔Correct answer-Additive color system
An installed audio system should be AT LEAST __________ above the ambient noise floor.
-5 dB
-25 dB
-45 dB
-75 dB ✔Correct answer-25 db
A device is controlled using the pictured cable. What is the MOST LIKELY method of controlling this
device?
-IR
-RF
-RS-232
-Network ✔Correct answer-RS-232
The minimum load safety rating for mounting audio visual equipment is:
-3:1
-5:1
-8:1
-10:1 ✔Correct answer-5:1
As part of regular system maintenance, when is the BEST time to update device firmware?
-On Friday afternoons.
-As soon as updates are available.
-Device firmware should never be updated after system sign-off.
-After coordination with the client, and when the system will be available for an extended period of
time ✔Correct answer-On Friday afternoons.
The brightness controls on a display adjusts which level?
-Black Level
-Chroma Level
-Hue
-White Level ✔Correct answer-Black Level
When verifying a display system, which of the following should be used to determine if it meets a
specified contrast ratio?
-Multi-meter
-Histogram
-Lux Capacitor
-Spot Photometer ✔Correct answer-Spot Photometer
When working with a client to design an AV solution for a new conference center, the client requests
a detailed budget for the equipment and installation. In what phase does this occur?
-Design phase
-Program phase
-Bidding phase
-Installation phase ✔Correct answer-Design phase
100% VERIFIED ANSWERS|ACTUAL EXAM|ALREADY
GRADED A+
What is the BEST way to determine how reverberant a space is?
-Clap your hands and listen for an echo
-Ask the client if anyone has complained that the room is too noisy
-Use an RT60 meter
-Use a DB SPL meter ✔Correct answer-Use an RT60 meter
The correct time to discuss visible finishes for wall plates, surface mount speakers, and wall mounted
screen casings is during the:
-Ordering
-Installation
-Site survey
-Contract award ✔Correct answer-Site survey
While surveying a conference room for a system upgrade, an engineer measures 55 dB SPL A-wtd of
ambient noise when the room is empty. How should they proceed? -Add voice lift to the system
proposal
-Add more loudspeakers to the system proposal
-Speak with the client about getting more information on how to address the noise source
-Do nothing, this level of ambient noise is well within system tolerance ✔Correct answer-Speak
with the client about getting more information on how to address the noise source
A client needs to add videoconferencing functionality for high-level, private meetings. Which of
following planned space types should you advise be ruled out?
-Divisible room
-Boardroom
-Conference room -Classroom ✔Correct answer-Divisible room
Which phase of an AV project comes immediately AFTER the Program Phase? -The Design Phase
-Project Planning and Coordination Phase
-The Verification Phase
-The Documentation Phase ✔Correct answer-The Design Phase
Which is NOT presented in the program report: -Executive Summary -Detailed list of equipment -
Budgets
-Infrastructure Considerations ✔Correct answer-Detailed list of equipment
When preparing an executive summary what should be included for submittal to the client?
-A deep dive, including full technical specficiation, of all equipment to be used in the design.
-An estimation of how many change orders might be required if the client doesn't use your design.
-References to new and emerging technologies that should be considered for future spaces.
-An overview of the programming process including who was surveyed during the process.
✔Correct answer-An overview of the programming process including who was surveyed during the
process.
, Which system is used to show colors from a video display?
-Additive color system -Subtractive color system -Plus/minus color system -Recover color system
✔Correct answer-Additive color system
An installed audio system should be AT LEAST __________ above the ambient noise floor.
-5 dB
-25 dB
-45 dB
-75 dB ✔Correct answer-25 db
A device is controlled using the pictured cable. What is the MOST LIKELY method of controlling this
device?
-IR
-RF
-RS-232
-Network ✔Correct answer-RS-232
The minimum load safety rating for mounting audio visual equipment is:
-3:1
-5:1
-8:1
-10:1 ✔Correct answer-5:1
As part of regular system maintenance, when is the BEST time to update device firmware?
-On Friday afternoons.
-As soon as updates are available.
-Device firmware should never be updated after system sign-off.
-After coordination with the client, and when the system will be available for an extended period of
time ✔Correct answer-On Friday afternoons.
The brightness controls on a display adjusts which level?
-Black Level
-Chroma Level
-Hue
-White Level ✔Correct answer-Black Level
When verifying a display system, which of the following should be used to determine if it meets a
specified contrast ratio?
-Multi-meter
-Histogram
-Lux Capacitor
-Spot Photometer ✔Correct answer-Spot Photometer
When working with a client to design an AV solution for a new conference center, the client requests
a detailed budget for the equipment and installation. In what phase does this occur?
-Design phase
-Program phase
-Bidding phase
-Installation phase ✔Correct answer-Design phase
