Watchguard Network Security |\ |\ |\
Essentials exam questions with |\ |\ |\ |\
answers
DNS port number|\ |\
53
HTTP Port Number |\ |\
80
DHCP Port Number |\ |\
67, 68
|\
HTTPS port number |\ |\
443
SMTP Port Number |\ |\
25
FTP Port Number
|\ |\
20, 21
|\
Performance Metrics |\
SD-WAN
Ping an Option
|\ |\
Traffic Monitor |\
/25 add 101 Dalmatians
|\ |\ |\
126 addresses
|\
,/26 First to Last- FTL
|\ |\ |\ |\
62 addresses
|\
/27 score is 27, and the 3 point shot
|\ |\ |\ |\ |\ |\ |\ |\
30 addresses
|\
/28 - house #28 now Cut the house in Half
|\ |\ |\ |\ |\ |\ |\ |\ |\
14 addresses
|\
/29 Two swans flew away, now turn right one upside down
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
6 addresses
|\
/30 30 your dirty send you to timbuck 2
|\ |\ |\ |\ |\ |\ |\ |\
2 addresses
|\
Most Secure encryption algorithms
|\ |\ |\
AES
How does default threat protection work?
|\ |\ |\ |\ |\
Default Threat Protection has three configurable components:
|\ |\ |\ |\ |\ |\
Blocked Ports |\
Blocked Sites |\
Default Packet Handling |\ |\
Default Threat Protection is the first line of defense, and takes
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
precedence over configured policy rules and other services. |\ |\ |\ |\ |\ |\ |\
How to configure logging for watchguard cloud?
|\ |\ |\ |\ |\ |\
You must add the device(Add Device) in WatchGuard Cloud, then
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
add the verification code (AKA configure on the Firebox). The
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
other thing you must do is make sure to enable logging on all the
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
policies. Though if you focus on "add the devices in WatchGuard
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
Cloud" and "configure on the FB", then you should be good to go.
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
, How does SD-WAN work?
|\ |\ |\
Software-Defined WAN (SD-WAN) is a software-based routing |\ |\ |\ |\ |\ |\ |\
solution that automatically distributes network traffic across
|\ |\ |\ |\ |\ |\ |\
multiple WAN connections based on policies you define. SD-WAN
|\ |\ |\ |\ |\ |\ |\ |\ |\
is embedded in the Firebox. The Firebox monitors your WAN
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
connections, captures near real-time performance data, and uses |\ |\ |\ |\ |\ |\ |\
this data to make routing decisions. For example, if a WAN
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
connection becomes congested, the Firebox automatically sends |\ |\ |\ |\ |\ |\ |\
traffic over a different WAN connection.
|\ |\ |\ |\ |\
SD-WAN works with different types of WAN connections, which
|\ |\ |\ |\ |\ |\ |\ |\ |\
means you can configure a hybrid WAN. For example, if your
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
Firebox has an MPLS connection and a broadband Internet
|\ |\ |\ |\ |\ |\ |\ |\ |\
connection, you can use both in an SD-WAN configuration. |\ |\ |\ |\ |\ |\ |\ |\
You can use SD-WAN to increase application availability and
|\ |\ |\ |\ |\ |\ |\ |\ |\
performance, and to better utilize a hybrid WAN. For example, |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
with SD-WAN, you can:
|\ |\ |\
Send high-priority, latency-sensitive traffic such as VoIP and video
|\ |\ |\ |\ |\ |\ |\ |\
conferencing over higher-quality, more expensive WAN
|\ |\ |\ |\ |\ |\ |\
connections
Send lower-priority traffic over less expensive WAN connections
|\ |\ |\ |\ |\ |\ |\
Specify performance thresholds so that connections fail over to a
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
different WAN connection when performance is less than ideal
|\ |\ |\ |\ |\ |\ |\ |\
What is Dynamic NAT? |\ |\ |\
HIDES INTERNAL TOPOLGY OF THE NETWORK-
|\ |\ |\ |\ |\
Dynamic NAT is the most frequently used type of NAT. It changes
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
the source IP address of an outgoing connection to the public IP
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
address of the Firebox. Outside the Firebox, you see only the
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
Essentials exam questions with |\ |\ |\ |\
answers
DNS port number|\ |\
53
HTTP Port Number |\ |\
80
DHCP Port Number |\ |\
67, 68
|\
HTTPS port number |\ |\
443
SMTP Port Number |\ |\
25
FTP Port Number
|\ |\
20, 21
|\
Performance Metrics |\
SD-WAN
Ping an Option
|\ |\
Traffic Monitor |\
/25 add 101 Dalmatians
|\ |\ |\
126 addresses
|\
,/26 First to Last- FTL
|\ |\ |\ |\
62 addresses
|\
/27 score is 27, and the 3 point shot
|\ |\ |\ |\ |\ |\ |\ |\
30 addresses
|\
/28 - house #28 now Cut the house in Half
|\ |\ |\ |\ |\ |\ |\ |\ |\
14 addresses
|\
/29 Two swans flew away, now turn right one upside down
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
6 addresses
|\
/30 30 your dirty send you to timbuck 2
|\ |\ |\ |\ |\ |\ |\ |\
2 addresses
|\
Most Secure encryption algorithms
|\ |\ |\
AES
How does default threat protection work?
|\ |\ |\ |\ |\
Default Threat Protection has three configurable components:
|\ |\ |\ |\ |\ |\
Blocked Ports |\
Blocked Sites |\
Default Packet Handling |\ |\
Default Threat Protection is the first line of defense, and takes
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
precedence over configured policy rules and other services. |\ |\ |\ |\ |\ |\ |\
How to configure logging for watchguard cloud?
|\ |\ |\ |\ |\ |\
You must add the device(Add Device) in WatchGuard Cloud, then
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
add the verification code (AKA configure on the Firebox). The
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
other thing you must do is make sure to enable logging on all the
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
policies. Though if you focus on "add the devices in WatchGuard
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
Cloud" and "configure on the FB", then you should be good to go.
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
, How does SD-WAN work?
|\ |\ |\
Software-Defined WAN (SD-WAN) is a software-based routing |\ |\ |\ |\ |\ |\ |\
solution that automatically distributes network traffic across
|\ |\ |\ |\ |\ |\ |\
multiple WAN connections based on policies you define. SD-WAN
|\ |\ |\ |\ |\ |\ |\ |\ |\
is embedded in the Firebox. The Firebox monitors your WAN
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
connections, captures near real-time performance data, and uses |\ |\ |\ |\ |\ |\ |\
this data to make routing decisions. For example, if a WAN
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
connection becomes congested, the Firebox automatically sends |\ |\ |\ |\ |\ |\ |\
traffic over a different WAN connection.
|\ |\ |\ |\ |\
SD-WAN works with different types of WAN connections, which
|\ |\ |\ |\ |\ |\ |\ |\ |\
means you can configure a hybrid WAN. For example, if your
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
Firebox has an MPLS connection and a broadband Internet
|\ |\ |\ |\ |\ |\ |\ |\ |\
connection, you can use both in an SD-WAN configuration. |\ |\ |\ |\ |\ |\ |\ |\
You can use SD-WAN to increase application availability and
|\ |\ |\ |\ |\ |\ |\ |\ |\
performance, and to better utilize a hybrid WAN. For example, |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
with SD-WAN, you can:
|\ |\ |\
Send high-priority, latency-sensitive traffic such as VoIP and video
|\ |\ |\ |\ |\ |\ |\ |\
conferencing over higher-quality, more expensive WAN
|\ |\ |\ |\ |\ |\ |\
connections
Send lower-priority traffic over less expensive WAN connections
|\ |\ |\ |\ |\ |\ |\
Specify performance thresholds so that connections fail over to a
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
different WAN connection when performance is less than ideal
|\ |\ |\ |\ |\ |\ |\ |\
What is Dynamic NAT? |\ |\ |\
HIDES INTERNAL TOPOLGY OF THE NETWORK-
|\ |\ |\ |\ |\
Dynamic NAT is the most frequently used type of NAT. It changes
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
the source IP address of an outgoing connection to the public IP
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
address of the Firebox. Outside the Firebox, you see only the
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
