MO-Valley Test 1-1 Graded A+
A ? must be used to properly maintain and shape the gaff.
a. clamp and blocks
b. gaff gauge
c. smooth single cut file
d. stoning hone - ANSWER-b. gaff gauge
A ? system is a barrier erected to prevent employees from falling to lower levels.
a. cover
b. kickboard
c. guardrail
d. tape and flagging - ANSWER-c. guardrail
A common and sometimes overlooked conductor is the surface or subsurface of ? .
a. anchor plates
b. poles
c. substation bus work
d. the earth - ANSWER-d. the earth
A competent, skilled Qualified Electrical Worker is one who has ? , ? , and a positive ?
for his or her trade.
a. motivation / knowledge / ability
b. personality / knowledge / ability
c. skill / knowledge / attitude
d. skill / motivation / attitude - ANSWER-c. skill / knowledge / attitude
A fall arrest attachment with a web loop must be attached to a harness with a ? or a ? .
a. hitch / carabiner
b. hitch / locking snap hook
c. hitch / metal connector
d. none of the above - ANSWER-a. hitch / carabiner
A hand tool such as a chisel is unsuitable for use if it has a(n) ? .
a. mushroomed head
b. oval blade
c. stress line in the handle
d. uninsulated handle - ANSWER-a. mushroomed head
A hitchhiking method should be used to climb with a WPFR device.
T/F - ANSWER-True
A pole that is over ? old should be supported with a line truck boom or other device in
case it is unstable.
a. 10 years
,b. 20 years
c. 30 years
d. 40 years - ANSWER-b. 20 years
A Qualified Electrical Worker must be ? .
a. able to determine the nominal voltage of exposed live parts
b. part of a random drug/alcohol testing program
c. physically fit for the job
d. trained by the IBEW - ANSWER-a. able to determine the nominal voltage of exposed
live parts
A qualified worker must be trained and have the ability to recognize ? .
a. energized parts
b. grounded lines
c. hazardous situations
d. various protective devices - ANSWER-a. energized parts
A screwdriver shall not be used as a punch or a ? .
a. chisel
b. drift pin
c. pole top rescue instrument
d. support - ANSWER-a. chisel
A signed copy of one's Apprenticeship Agreement confirms to the student and others
that he or she is a(n) ? apprentice.
a. competent
b. indentured
c. qualified
d. skilled - ANSWER-b. indentured
A student should read the lesson questions BEFORE reading the lesson reference
material.
T/F - ANSWER-True
A victim of a severe shock may suffer internal hemorrhages and destruction of tissues,
nerves, and muscles that are not ? .
a. life threatening
b. readily visible
c. treatable
d. very serious - ANSWER-b. readily visible
A(n) ? fault is a short circuit caused when an object in contact with the earth contacts a
live conductor.
a. ground
b. isolation
c. phase-to-phase
, d. system - ANSWER-a. ground
According to ANSI Z359.4, bucket truck rescue systems are designed for a single
person load up to ? .
a. 220 lbs.
b. 250 lbs.
c. 300 lbs.
d. 310 lbs - ANSWER-d. 310 lbs
According to ANSI Z359.4, bucket truck rescue systems are designed for an exceptional
two man descent up to ? .
a. 400 lbs.
b. 440 lbs.
c. 500 lbs.
d. 540 lbs. - ANSWER-b. 440 lbs.
According to OSHA, a fall arrest system should be rigged so that a worker cannot free
fall more than ? nor contact any lower level.
a. 2'
b. 4'
c. 6'
d. 8' - ANSWER-c. 6'
According to OSHA, the employer is NOT responsible for ? .
a. evaluating workplace conditions
b. minimizing or eliminating potential hazards
c. providing yearly physicals
d. warning employees of potential hazards - ANSWER-c. providing yearly physicals
After accessing the pole top victim's condition, the rescuer should ? .
a. cut the victim's safety line
b. drive a screwdriver into the crossarm and secure hand line
c. give two quick breaths
d. rig the rescue rope - ANSWER-d. rig the rescue rope
After lines and equipment are deenergized, they must be tested and ? before they are
considered dead.
a. grounded
b. tagged out
c. traced back to an open point
d. under lockout/tagout - ANSWER-a. grounded
All tools shall be kept in good working condition, properly stored, and must be ? .
a. calibrated weekly
b. capable of withstanding a short circuit
c. IEEE approved
A ? must be used to properly maintain and shape the gaff.
a. clamp and blocks
b. gaff gauge
c. smooth single cut file
d. stoning hone - ANSWER-b. gaff gauge
A ? system is a barrier erected to prevent employees from falling to lower levels.
a. cover
b. kickboard
c. guardrail
d. tape and flagging - ANSWER-c. guardrail
A common and sometimes overlooked conductor is the surface or subsurface of ? .
a. anchor plates
b. poles
c. substation bus work
d. the earth - ANSWER-d. the earth
A competent, skilled Qualified Electrical Worker is one who has ? , ? , and a positive ?
for his or her trade.
a. motivation / knowledge / ability
b. personality / knowledge / ability
c. skill / knowledge / attitude
d. skill / motivation / attitude - ANSWER-c. skill / knowledge / attitude
A fall arrest attachment with a web loop must be attached to a harness with a ? or a ? .
a. hitch / carabiner
b. hitch / locking snap hook
c. hitch / metal connector
d. none of the above - ANSWER-a. hitch / carabiner
A hand tool such as a chisel is unsuitable for use if it has a(n) ? .
a. mushroomed head
b. oval blade
c. stress line in the handle
d. uninsulated handle - ANSWER-a. mushroomed head
A hitchhiking method should be used to climb with a WPFR device.
T/F - ANSWER-True
A pole that is over ? old should be supported with a line truck boom or other device in
case it is unstable.
a. 10 years
,b. 20 years
c. 30 years
d. 40 years - ANSWER-b. 20 years
A Qualified Electrical Worker must be ? .
a. able to determine the nominal voltage of exposed live parts
b. part of a random drug/alcohol testing program
c. physically fit for the job
d. trained by the IBEW - ANSWER-a. able to determine the nominal voltage of exposed
live parts
A qualified worker must be trained and have the ability to recognize ? .
a. energized parts
b. grounded lines
c. hazardous situations
d. various protective devices - ANSWER-a. energized parts
A screwdriver shall not be used as a punch or a ? .
a. chisel
b. drift pin
c. pole top rescue instrument
d. support - ANSWER-a. chisel
A signed copy of one's Apprenticeship Agreement confirms to the student and others
that he or she is a(n) ? apprentice.
a. competent
b. indentured
c. qualified
d. skilled - ANSWER-b. indentured
A student should read the lesson questions BEFORE reading the lesson reference
material.
T/F - ANSWER-True
A victim of a severe shock may suffer internal hemorrhages and destruction of tissues,
nerves, and muscles that are not ? .
a. life threatening
b. readily visible
c. treatable
d. very serious - ANSWER-b. readily visible
A(n) ? fault is a short circuit caused when an object in contact with the earth contacts a
live conductor.
a. ground
b. isolation
c. phase-to-phase
, d. system - ANSWER-a. ground
According to ANSI Z359.4, bucket truck rescue systems are designed for a single
person load up to ? .
a. 220 lbs.
b. 250 lbs.
c. 300 lbs.
d. 310 lbs - ANSWER-d. 310 lbs
According to ANSI Z359.4, bucket truck rescue systems are designed for an exceptional
two man descent up to ? .
a. 400 lbs.
b. 440 lbs.
c. 500 lbs.
d. 540 lbs. - ANSWER-b. 440 lbs.
According to OSHA, a fall arrest system should be rigged so that a worker cannot free
fall more than ? nor contact any lower level.
a. 2'
b. 4'
c. 6'
d. 8' - ANSWER-c. 6'
According to OSHA, the employer is NOT responsible for ? .
a. evaluating workplace conditions
b. minimizing or eliminating potential hazards
c. providing yearly physicals
d. warning employees of potential hazards - ANSWER-c. providing yearly physicals
After accessing the pole top victim's condition, the rescuer should ? .
a. cut the victim's safety line
b. drive a screwdriver into the crossarm and secure hand line
c. give two quick breaths
d. rig the rescue rope - ANSWER-d. rig the rescue rope
After lines and equipment are deenergized, they must be tested and ? before they are
considered dead.
a. grounded
b. tagged out
c. traced back to an open point
d. under lockout/tagout - ANSWER-a. grounded
All tools shall be kept in good working condition, properly stored, and must be ? .
a. calibrated weekly
b. capable of withstanding a short circuit
c. IEEE approved
