MODULE 2 ASPHALT/CONCRETE EXAM QUESTIONS AND
ANSWERS 2025/2026 UPDATED ALL ANSWERS 100% CORRECT
DETAILED BEST GRADED A+ FOR SUCCESS
A composite material that is prepared in a hot-mix plant and used for construction of highway,
parking lot, or airfield pavements capable of supporting high traffic load volumes and axle
loads. - CORRECT ANSWERS asphalt cement
A rock crusher in which a steel center cone rotates eccentrically to crush the material against
the outside cylindrical steel wall. - CORRECT ANSWERS gyratory crushers
It is a bituminous material that is produced by distillation of petroleum crude oil. - CORRECT
ANSWERS asphalt cement
Metal plates of various shapes placed longitudinally inside the shell of a drum dryer or mixture.
As the material moves through the drum, the flight first lift the aggregate and then tumble it
through the hot gases. - CORRECT ANSWERS Flights
The top surface layer of an asphalt pavement, usually less than 1 in. thick, to improve skid
resistance and smoothness. - CORRECT ANSWERS friction course
Two long arms extending forward from each side of the asphalt paver screed and attached to
tow points on the tractor. This mechanical connection enables the screed to float on the
asphalt mix during placement. - CORRECT ANSWERS leveling arms
Joints for the purpose of regulating cracking from the unavoidable and unpredictable
contraction of concrete. - CORRECT ANSWERS contraction joints
An asphalt paving mix produced in a plant where aggregates are heated and dried and then
combined with hot liquid asphalt cement and placed at high temperature. - CORRECT
ANSWERS hot-mix asphlat
ANSWERS 2025/2026 UPDATED ALL ANSWERS 100% CORRECT
DETAILED BEST GRADED A+ FOR SUCCESS
A composite material that is prepared in a hot-mix plant and used for construction of highway,
parking lot, or airfield pavements capable of supporting high traffic load volumes and axle
loads. - CORRECT ANSWERS asphalt cement
A rock crusher in which a steel center cone rotates eccentrically to crush the material against
the outside cylindrical steel wall. - CORRECT ANSWERS gyratory crushers
It is a bituminous material that is produced by distillation of petroleum crude oil. - CORRECT
ANSWERS asphalt cement
Metal plates of various shapes placed longitudinally inside the shell of a drum dryer or mixture.
As the material moves through the drum, the flight first lift the aggregate and then tumble it
through the hot gases. - CORRECT ANSWERS Flights
The top surface layer of an asphalt pavement, usually less than 1 in. thick, to improve skid
resistance and smoothness. - CORRECT ANSWERS friction course
Two long arms extending forward from each side of the asphalt paver screed and attached to
tow points on the tractor. This mechanical connection enables the screed to float on the
asphalt mix during placement. - CORRECT ANSWERS leveling arms
Joints for the purpose of regulating cracking from the unavoidable and unpredictable
contraction of concrete. - CORRECT ANSWERS contraction joints
An asphalt paving mix produced in a plant where aggregates are heated and dried and then
combined with hot liquid asphalt cement and placed at high temperature. - CORRECT
ANSWERS hot-mix asphlat
