NEC 2017 Journeyman EXAM 2025/2026 ACTUAL COMPLETE REAL EXAM QUESTIONS
WITH ACCURATE ANSWERS (VERIFIED ANSWERS) | GET IT RIGHT!! GRADED A+ / 2025
BRAND NEW EXAM!!
How many wires do you need to transmit 3-phase power? - (answer)3
The code defines a "continuous load" as one in which the load is expected to continue for ___ hours or
more. - (answer)3
A transformer can be fed on the secondary side. (T/F) - (answer)T
According to the NEC, a wire located in a partially protected area such as under a roofed open porch
would be located in a ____ location - (answer)Damp, Article 100
The term "In sight from" means that it is located within ____ feet and it is visible - (answer)50' article
100
When terminating conductors 6 AWG and larger to terminal parts, _____ are not permitted to be used
as a means of connection. - (answer)Wire binding screws, 110.14 (A)
The working area above a panel shall not be less than ____ - (answer)6.5' , 110.14(A)
The width of the working space shall be 30" or the width of the equipment, whichever is greater. In no
case shall the width of the working space be smaller than to prevent the door to open at least ____ -
(answer)90 degrees, 110.26(A)(2)
For devices with screw shells, the terminal connected to the screw shell shall be connected to the _____
conductor - (answer)Grounded, 200.10(C)
When a branch circuit is supplied from a DC system, operating at 60 volts or more, each underground
conductor of 4 AWG or larger shall be ______ at all termination points. - (answer)Identified by polarity,
200.10(C)
, NEC 2017 Journeyman EXAM 2025/2026 ACTUAL COMPLETE REAL EXAM QUESTIONS
WITH ACCURATE ANSWERS (VERIFIED ANSWERS) | GET IT RIGHT!! GRADED A+ / 2025
BRAND NEW EXAM!!
In a dwelling unit kitchen, which of the following locations requires GFCI protection?
A.) A receptacle installed to serve kitchen countertop surfaces.
B.) Receptacles installed under a sink.
C.) A receptacle installed within 6' for the edge of a sink.
D.) A & C
E.) All the above - (answer)D, 210.8(A)(6&7)
Where a receptacle is installed within 6 1/2' of a bathtub or shower stall and is located outside of the
bathroom, the receptacle shall be protected with GFCI. Protection. T/F - (answer)F, 210.8(A)(1&9)
In addition to the number of circuits required by other parts of this code, laundry branch circuits are
required to be installed on a _____ and this circuit shall have no other outlets. - (answer)Individual 20-
amp branch circuit, 210,11(C)(2)
When branch circuit conductors supply a single motor that is expected to be used in a continuous duty
application, the capacity of the conductors shall not be less than _____ of the motor FLC rating. -
(answer)125%, 210.19(A) info note #2, 430.22
How many 2-amp fluorescent lights running for 10 hours straight can be installed on a single 120 volt 20-
amp branch circuit? - (answer)20-amps/1.25= 16 amps 16-amps/2-amps per fixture= 8 fixtures.,
210.19(A)(1)(a)
On a branch circuit rated at 15-amps, what is the maximum load permitted for equip fastened in place
when other outlets are served on the same branch circuit? - (answer)7.5A (50%), 210.23(A)(2)
Laundry outlets need to be installed within ___ ft. Of the intended location of the laundry equipment. -
(answer)6', 210.50(C)
WITH ACCURATE ANSWERS (VERIFIED ANSWERS) | GET IT RIGHT!! GRADED A+ / 2025
BRAND NEW EXAM!!
How many wires do you need to transmit 3-phase power? - (answer)3
The code defines a "continuous load" as one in which the load is expected to continue for ___ hours or
more. - (answer)3
A transformer can be fed on the secondary side. (T/F) - (answer)T
According to the NEC, a wire located in a partially protected area such as under a roofed open porch
would be located in a ____ location - (answer)Damp, Article 100
The term "In sight from" means that it is located within ____ feet and it is visible - (answer)50' article
100
When terminating conductors 6 AWG and larger to terminal parts, _____ are not permitted to be used
as a means of connection. - (answer)Wire binding screws, 110.14 (A)
The working area above a panel shall not be less than ____ - (answer)6.5' , 110.14(A)
The width of the working space shall be 30" or the width of the equipment, whichever is greater. In no
case shall the width of the working space be smaller than to prevent the door to open at least ____ -
(answer)90 degrees, 110.26(A)(2)
For devices with screw shells, the terminal connected to the screw shell shall be connected to the _____
conductor - (answer)Grounded, 200.10(C)
When a branch circuit is supplied from a DC system, operating at 60 volts or more, each underground
conductor of 4 AWG or larger shall be ______ at all termination points. - (answer)Identified by polarity,
200.10(C)
, NEC 2017 Journeyman EXAM 2025/2026 ACTUAL COMPLETE REAL EXAM QUESTIONS
WITH ACCURATE ANSWERS (VERIFIED ANSWERS) | GET IT RIGHT!! GRADED A+ / 2025
BRAND NEW EXAM!!
In a dwelling unit kitchen, which of the following locations requires GFCI protection?
A.) A receptacle installed to serve kitchen countertop surfaces.
B.) Receptacles installed under a sink.
C.) A receptacle installed within 6' for the edge of a sink.
D.) A & C
E.) All the above - (answer)D, 210.8(A)(6&7)
Where a receptacle is installed within 6 1/2' of a bathtub or shower stall and is located outside of the
bathroom, the receptacle shall be protected with GFCI. Protection. T/F - (answer)F, 210.8(A)(1&9)
In addition to the number of circuits required by other parts of this code, laundry branch circuits are
required to be installed on a _____ and this circuit shall have no other outlets. - (answer)Individual 20-
amp branch circuit, 210,11(C)(2)
When branch circuit conductors supply a single motor that is expected to be used in a continuous duty
application, the capacity of the conductors shall not be less than _____ of the motor FLC rating. -
(answer)125%, 210.19(A) info note #2, 430.22
How many 2-amp fluorescent lights running for 10 hours straight can be installed on a single 120 volt 20-
amp branch circuit? - (answer)20-amps/1.25= 16 amps 16-amps/2-amps per fixture= 8 fixtures.,
210.19(A)(1)(a)
On a branch circuit rated at 15-amps, what is the maximum load permitted for equip fastened in place
when other outlets are served on the same branch circuit? - (answer)7.5A (50%), 210.23(A)(2)
Laundry outlets need to be installed within ___ ft. Of the intended location of the laundry equipment. -
(answer)6', 210.50(C)
