MRO PRACTICE QUESTIONS WITH
COMPLETE SOLUTIONS!!
1. What constitutes a fatal flaw?:ANSWERS § 40.199 What problems always
cause a drug test to be cancelled?
(a) As the MRO, when the laboratory discovers a "fatal flaw" during its processing of
incoming specimens (see §40.83), the laboratory will report to you that the specimen
has been "Rejected for Testing" (with the reason stated). You must always cancel
such a test.
(b) The following are "fatal flaws":
(1) There is no CCF;
(2) In cases where a specimen has been collected, there is no specimen submitted
with the CCF;
(3) There is no printed collector's name and no collector's signature;
(4) Two separate collections are performed using one CCF;
(5) The specimen ID numbers on the specimen bottle and the CCF do not match;
(6) The specimen bottle seal is broken or shows evidence of tampering (and a split
specimen cannot be re-designated, see §40.83(h)); or
(7) Because of leakage or other causes, there is an insufficient amount of urine in
the primary specimen bottle for analysis and the specimens cannot be re-designated
(see §40.83(h))
2. What are considered minor or correctable flaws?: ANSWERS x
3. What if the donor refuses to sign?:
4. What are the basic steps of the collection process?: ANSWERS x
5. When MUST an observed collection be ordered by the collector? By the
employer? By the MRO?: ANSWERS x
6. What steps should be taken if the specimen is outside of temperature
range?: ANSWERS x
7. What are DOT's regulations regarding shy bladder (insufficient volume)?: x
COMPLETE SOLUTIONS!!
1. What constitutes a fatal flaw?:ANSWERS § 40.199 What problems always
cause a drug test to be cancelled?
(a) As the MRO, when the laboratory discovers a "fatal flaw" during its processing of
incoming specimens (see §40.83), the laboratory will report to you that the specimen
has been "Rejected for Testing" (with the reason stated). You must always cancel
such a test.
(b) The following are "fatal flaws":
(1) There is no CCF;
(2) In cases where a specimen has been collected, there is no specimen submitted
with the CCF;
(3) There is no printed collector's name and no collector's signature;
(4) Two separate collections are performed using one CCF;
(5) The specimen ID numbers on the specimen bottle and the CCF do not match;
(6) The specimen bottle seal is broken or shows evidence of tampering (and a split
specimen cannot be re-designated, see §40.83(h)); or
(7) Because of leakage or other causes, there is an insufficient amount of urine in
the primary specimen bottle for analysis and the specimens cannot be re-designated
(see §40.83(h))
2. What are considered minor or correctable flaws?: ANSWERS x
3. What if the donor refuses to sign?:
4. What are the basic steps of the collection process?: ANSWERS x
5. When MUST an observed collection be ordered by the collector? By the
employer? By the MRO?: ANSWERS x
6. What steps should be taken if the specimen is outside of temperature
range?: ANSWERS x
7. What are DOT's regulations regarding shy bladder (insufficient volume)?: x