DANTE LEVEL 2 EXAM
How many audio channels can be contained in a Dante unicast flow? -
ANSWERS-4
What protocol does Dante for clocking? - ANSWERS-PTP
What is the "golden rule" about Dante redundant networks? -
ANSWERS-Do not link the primary and secondary networks - they
must remain in separate broadcast domains.
Since the beginning of Dante, multicast flows could carry X channels
per flow.
With newer firmware, multicast flows can carry up to Y channels per
flow. - ANSWERS-Since the beginning of Dante, multicast flows
could carry 8 channels per flow.
With newer firmware, multicast flows can carry up to 64 channels per
flow.
As a simple rule of thumb, how much latency should be allowed per
network switch hop? - ANSWERS-0.1 msec (100 microseconds)
Suppose a Dante device has one channel and two transmit flows. Can
it connect to three different receiving devices? - ANSWERS-Yes. The
channel must be sent as multicast.
, Can a Dante network with five switch hops support latency of 1
msec? - ANSWERS-Yes. Minimum recommended latency could be as
low as 0.5 msec.
A unicast subscription is made between two Dante devices.
The latency value of the transmitter and receiver are 0.25msec and
0.5msec, respectively.
What is the resulting latency of this stream? - ANSWERS-0.5 msec
Approximately how much bandwidth does a unicast audio flow use?
(4-ch, 24-bit, 48kHz, 1msec latency) - ANSWERS-6Mbps
Dante Controller can recall part of a preset - only storing information
about some settings and/or limiting which devices we want to recall
them on. - ANSWERS-True
What advantages does unicast have over multicast communication?
(Select 3.) - ANSWERS-Unicast is simpler to deliver, reducing the
strain on the switch.
Unicast can achieve lower latency than multicast. (Minimum latency
for multicast is 1msec.)
Unicast can cross a router, multicast cannot.
A multicast subscription is made between two Dante devices. The
latency value of the transmitter and receiver are 0.25msec and
0.5msec, respectively. What is the resulting latency of this stream? -
ANSWERS-1.0 msec
How many audio channels can be contained in a Dante unicast flow? -
ANSWERS-4
What protocol does Dante for clocking? - ANSWERS-PTP
What is the "golden rule" about Dante redundant networks? -
ANSWERS-Do not link the primary and secondary networks - they
must remain in separate broadcast domains.
Since the beginning of Dante, multicast flows could carry X channels
per flow.
With newer firmware, multicast flows can carry up to Y channels per
flow. - ANSWERS-Since the beginning of Dante, multicast flows
could carry 8 channels per flow.
With newer firmware, multicast flows can carry up to 64 channels per
flow.
As a simple rule of thumb, how much latency should be allowed per
network switch hop? - ANSWERS-0.1 msec (100 microseconds)
Suppose a Dante device has one channel and two transmit flows. Can
it connect to three different receiving devices? - ANSWERS-Yes. The
channel must be sent as multicast.
, Can a Dante network with five switch hops support latency of 1
msec? - ANSWERS-Yes. Minimum recommended latency could be as
low as 0.5 msec.
A unicast subscription is made between two Dante devices.
The latency value of the transmitter and receiver are 0.25msec and
0.5msec, respectively.
What is the resulting latency of this stream? - ANSWERS-0.5 msec
Approximately how much bandwidth does a unicast audio flow use?
(4-ch, 24-bit, 48kHz, 1msec latency) - ANSWERS-6Mbps
Dante Controller can recall part of a preset - only storing information
about some settings and/or limiting which devices we want to recall
them on. - ANSWERS-True
What advantages does unicast have over multicast communication?
(Select 3.) - ANSWERS-Unicast is simpler to deliver, reducing the
strain on the switch.
Unicast can achieve lower latency than multicast. (Minimum latency
for multicast is 1msec.)
Unicast can cross a router, multicast cannot.
A multicast subscription is made between two Dante devices. The
latency value of the transmitter and receiver are 0.25msec and
0.5msec, respectively. What is the resulting latency of this stream? -
ANSWERS-1.0 msec
