Osmose Pesticide Quiz| Verified
Exam Questions with Clear Correct
Answers| All Graded A+| Latest
Premium Update(2025-2026)|
100% Guaranteed Success.
Shipping papers are designed to? - Answer✅✅Inform emergency response
personnel of the quantity and types of Hazardous Materials that are being
transported on a particular vehicle.
Precautionary statements and toxicity categories. - Answer✅✅Cat I - Danger
(highly toxic) Cat II - Warning (moderately toxic) Cat III - Caution (slightly toxic) Cat IIII
- (relatively non-toxic)
When should you read the product label? - Answer✅✅Always read the product
label before using product. Before you select, buy or use the product. Before
applying. After applying if anything out of the ordinary happens. Before storing or
disposing of the pesticide or pesticide containers.
Types of fumes used. - Answer✅✅WoodFume. MITC-Fume. DuraFume.
, Depth of hole drilled for MITC-Fume. - Answer✅✅12" to 15"
Angle drilled for MITC-Fume - Answer✅✅45 degrees or steeper
Where do I start drilling for MITC - Answer✅✅At ground level
In the absence of contract specifications, this chart determines the number or
placement of application holes for MITC. - Answer✅✅28" or less- 2 holes beginning
at ground line spaced 90 degrees apart and 6" to 8" inches higher than first hole. 29"
to 35" - 3 holes beginning at ground-line spaced 120 degrees apart and 6" to 8"
higher than previous hole. 36" to 49" - 4 holes beginning at ground line spaced 90
degrees apart and 6 to 8 inches higher than previous hole. 50" to 59" - 5 holes
beginning at ground line spaced 70 degrees apart and 6 to 8 inches higher than
previous hole.
Steps to applying MITC-Fume (after drilling hole) - Answer✅✅Have on proper PPE.
Grab 1 tube at a time. Start at lowest hole first. Open tube away from face. Place in
lowest hole (open end down). Place MITC tube cap in hole. Plug hole.
SDS (mandatory parts) - Answer✅✅Identification
Hazard identification
Composition
First-aid measures
Fire-fighting measures
Accidental release measures
Handling and storage
Exposure controls, PPE
Physical and Chemical properties
Stability and reactivity
Toxicological information
Other information
SDS (non mandatory parts) - Answer✅✅Ecological information
Disposal considerations
Transport information
Regulatory information
We cannot treat a pole within how many feet of a well? - Answer✅✅50
When symptoms appear over a long period of time due to repeated exposures to
slightly toxic materials; this is known as? - Answer✅✅Chronic poisoning
How many MITC tubes are placed in a 35" ground-line circumference? -
Answer✅✅3
An applicator is allowed to apply a pesticide at a lower dosage than what is listed on
the label? - Answer✅✅True
Exam Questions with Clear Correct
Answers| All Graded A+| Latest
Premium Update(2025-2026)|
100% Guaranteed Success.
Shipping papers are designed to? - Answer✅✅Inform emergency response
personnel of the quantity and types of Hazardous Materials that are being
transported on a particular vehicle.
Precautionary statements and toxicity categories. - Answer✅✅Cat I - Danger
(highly toxic) Cat II - Warning (moderately toxic) Cat III - Caution (slightly toxic) Cat IIII
- (relatively non-toxic)
When should you read the product label? - Answer✅✅Always read the product
label before using product. Before you select, buy or use the product. Before
applying. After applying if anything out of the ordinary happens. Before storing or
disposing of the pesticide or pesticide containers.
Types of fumes used. - Answer✅✅WoodFume. MITC-Fume. DuraFume.
, Depth of hole drilled for MITC-Fume. - Answer✅✅12" to 15"
Angle drilled for MITC-Fume - Answer✅✅45 degrees or steeper
Where do I start drilling for MITC - Answer✅✅At ground level
In the absence of contract specifications, this chart determines the number or
placement of application holes for MITC. - Answer✅✅28" or less- 2 holes beginning
at ground line spaced 90 degrees apart and 6" to 8" inches higher than first hole. 29"
to 35" - 3 holes beginning at ground-line spaced 120 degrees apart and 6" to 8"
higher than previous hole. 36" to 49" - 4 holes beginning at ground line spaced 90
degrees apart and 6 to 8 inches higher than previous hole. 50" to 59" - 5 holes
beginning at ground line spaced 70 degrees apart and 6 to 8 inches higher than
previous hole.
Steps to applying MITC-Fume (after drilling hole) - Answer✅✅Have on proper PPE.
Grab 1 tube at a time. Start at lowest hole first. Open tube away from face. Place in
lowest hole (open end down). Place MITC tube cap in hole. Plug hole.
SDS (mandatory parts) - Answer✅✅Identification
Hazard identification
Composition
First-aid measures
Fire-fighting measures
Accidental release measures
Handling and storage
Exposure controls, PPE
Physical and Chemical properties
Stability and reactivity
Toxicological information
Other information
SDS (non mandatory parts) - Answer✅✅Ecological information
Disposal considerations
Transport information
Regulatory information
We cannot treat a pole within how many feet of a well? - Answer✅✅50
When symptoms appear over a long period of time due to repeated exposures to
slightly toxic materials; this is known as? - Answer✅✅Chronic poisoning
How many MITC tubes are placed in a 35" ground-line circumference? -
Answer✅✅3
An applicator is allowed to apply a pesticide at a lower dosage than what is listed on
the label? - Answer✅✅True
